gtsio.c

ge公司的dv4av4信号处理板的bsp源代码

            }       
                   
        else
            (*pChan->putRcvChar) (pChan->putRcvArg, c);                   
        }  
    }


/******************************************************************************
*
* gtSioIntTx - handle a channel's transmitter-ready interrupt
*
* RETURNS: N/A
*/ 

void gtSioIntTx
    (
    GT_PORT *	pChan		/* channel generating the interrupt */
    )
    {
    char            outChar;

    /* 
     * Ack for last transmit.
     */
   
    bslSioTxIntAck(pChan->portId);

    /*
     * If there's a character to transmit then write it out. 
     */

    if ((*pChan->getTxChar) (pChan->getTxArg, &outChar) != ERROR)
        bslSioPutc(pChan->portId, outChar);
    }


/******************************************************************************
*
* gtSioTxStartup - start the interrupt transmitter
*
* RETURNS: OK on success, ENOSYS if the device is polled-only, or
* EIO on hardware error.
*/

LOCAL int gtSioTxStartup
    (
    SIO_CHAN * pSioChan                 /* channel to start */
    )
    {
    GT_PORT * pChan = (GT_PORT *)pSioChan;
    char   outChar;

    /*
     * Enable tx interrupts.  We won't get an interrupt until the 
     * TX operation is done.  Then start a single character output.
     */

    if (((*pChan->getTxChar) (pChan->getTxArg, &outChar) != ERROR) &&
       (bslSioTxReady(pChan->portId) == 1))
	{
	     bslSioTxIntEnable (pChan->portId);
        bslSioPutc(pChan->portId, outChar);
	}

    return (OK);
    }

/******************************************************************************
*
* gtSioCallbackInstall - install ISR callbacks to get/put chars
*
* This driver allows interrupt callbacks for transmitting characters
* and receiving characters. In general, drivers may support other
* types of callbacks too.
*
* RETURNS: OK on success, or ENOSYS for an unsupported callback type.
*/ 

LOCAL int gtSioCallbackInstall
    (
    SIO_CHAN *	pSioChan,               /* channel */
    int		callbackType,           /* type of callback */
    STATUS	(*callback)(void *, ...),          /* callback */
    void *      callbackArg             /* parameter to callback */
    )
    {
    GT_PORT * pChan = (GT_PORT *)pSioChan;

    switch (callbackType)
	{
	case SIO_CALLBACK_GET_TX_CHAR:
	    pChan->getTxChar	= (void *)callback;
	    pChan->getTxArg	= callbackArg;
	    return (OK);

	case SIO_CALLBACK_PUT_RCV_CHAR:
	    pChan->putRcvChar	  = (void *)callback;
	    pChan->putRcvArg	     = callbackArg;
       pChan->savePutRcvChar = pChan->putRcvChar;
       pChan->savePutRcvArg  = pChan->putRcvArg;
       return (OK);

	default:
	    return (ENOSYS);
	}
    }

/*******************************************************************************
*
* gtSioPollOutput - output a character in polled mode
*
* RETURNS: OK if a character arrived, EIO on device error, EAGAIN
* if the output buffer if full. ENOSYS if the device is
* interrupt-only.
*/

LOCAL int gtSioPollOutput
    (
    SIO_CHAN *	pSioChan,
    char	outChar
    )
    {
    GT_PORT * pChan = (GT_PORT *)pSioChan;

    /* is the transmitter ready to accept a character? */

    if (bslSioTxReady(pChan->portId) != 1)
	    return (EAGAIN);

    /* write out the character */

    bslSioPutc(pChan->portId, outChar);

    return (OK);
    }

/******************************************************************************
*
* gtSioPollInput - poll the device for input
*
* RETURNS: OK if a character arrived, EIO on device error, EAGAIN
* if the input buffer if empty, ENOSYS if the device is
* interrupt-only.
*/

LOCAL int gtSioPollInput
    (
    SIO_CHAN *	pSioChan,
    char *	thisChar
    )
    {
    GT_PORT * pChan = (GT_PORT *)pSioChan;
    int	status;

    status = bslSioGetc(pChan->portId);

    if (status == -1)
	    return (EAGAIN);	/* no input available at this time */

    else
        *thisChar = (char)status;

    return (OK);
    }

/******************************************************************************
*
* gtSioModeSet - toggle between interrupt and polled mode
*
* RETURNS: OK on success, EIO on unsupported mode.
*/

LOCAL int gtSioModeSet
    (
    GT_PORT * pChan,    /* channel */
    uint_t    newMode   /* new mode */
    )
    {

    if ((newMode != SIO_MODE_POLL) && (newMode != SIO_MODE_INT))
	return (EIO);

    /* Don't enter interrupt mode unless it is allowed. */

    if ((newMode == SIO_MODE_INT) && (!gtIntrMode))
	return (EIO);

    /* set the new mode */

    pChan->mode = newMode;

    if (pChan->mode == SIO_MODE_INT)
	{
        bslSioRxIntEnable(pChan->portId);
        bslSioTxIntEnable(pChan->portId);
	}
    else
	{
        bslSioRxIntDisable(pChan->portId);
        bslSioTxIntDisable(pChan->portId);
	}

    return (OK);
    }


/******************************************************************************
*
* gtSioOptSet - set hardware options
*
* This routine sets up the hardware according to the specified option
* argument.  If the hardware cannot support a particular option value, 
* this function ignores that portion of the request.
*
* Currently no options are supported.
*
* RETURNS: OK upon success, or EIO for invalid arguments.
*/

LOCAL int gtSioOptSet
    (
    GT_PORT * pChan,		/* channel */
    uint_t	    newOpts          	/* new options */
    )
    {
    return (OK);
    }

/*******************************************************************************
*
* gtSioIoctl - special device control
*
* This routine handles the IOCTL messages from the user. It supports commands 
* to get/set baud rate, mode(INT,POLL), hardware options(parity, number of 
* data bits).
*
* RETURNS: OK on success, ENOSYS on unsupported request, EIO on failed
* request.
*/

LOCAL int gtSioIoctl
    (
    SIO_CHAN *	pSioChan,		/* device to control */
    int		request,		/* request code */
    void *	someArg			/* some argument */
    )
    {
    GT_PORT *pChan = (GT_PORT *) pSioChan;
    int     arg = (int)someArg;

    switch (request)
    {
    case SIO_BAUD_SET:
        /* Set baud rate. Return EIO for invalid baud rate.  */
        if (arg < GT_BAUD_MIN || arg > GT_BAUD_MAX)
            return (EIO);
        pChan->baud = arg;
        return (OK);

    case SIO_BAUD_GET:
        /* Get the baud rate and return OK */
        *(int *)arg = pChan->baud;
        return (OK);

    case SIO_MODE_SET:
        /*
         * Set the mode (e.g., to interrupt or polled). Return OK
         * or EIO for an unknown or unsupported mode.
         */
        return (gtSioModeSet (pChan, arg));

    case SIO_MODE_GET:
        /* Get the current mode and return OK.  */
        *(int *)arg = pChan->mode;
        return (OK);

    case SIO_AVAIL_MODES_GET:
        /* Get the available modes and return OK.  */
        *(int *)arg = SIO_MODE_INT | SIO_MODE_POLL;
        return (OK);

    case SIO_HW_OPTS_SET:
	    /*
	     * Optional command to set hardware options (as defined
	     * in sioLib.h).
	     */
        return (gtSioOptSet (pChan, arg));


    case SIO_HW_OPTS_GET:
	     /*
	      * Optional command to get the hardware options (as defined
	      * in sioLib.h). Return OK or ENOSYS if this command is not
	      * implemented.  Note: if this command is unimplemented, it
	      * will be assumed that the driver options are CREAD | CS8
	      * (e.g., eight data bits, one stop bit, no parity, ints enabled).
	      */
        *(int *)arg = pChan->options;
        return (OK);

    case SIO_HUP:
        return (ENOSYS);

    case SIO_OPEN:
        return (ENOSYS); /* always open */
        
    case SIO_SHMUART_CHAR:
        pChan->rxRoute = (void *) arg; 
	     return (OK); 

    case SIO_ROUTE_SET:
        pChan->setRoute = (void *) arg; 
        return (OK);
        
    default:
        return (ENOSYS);
	 }
}

/*******************************************************************************
*
* dummyCallback - dummy callback routine
*
* RETURNS: ERROR.
*/

LOCAL STATUS dummyCallback (void)
    {
    return (ERROR);
    }