df_103_ini.c

东方电子700系统接入源代码,比较一下,就清楚如何利用该代码改写其他的接入代码了.

#include "dev_mng.h"
#include "x103.h"

/*   串口设置   */
BYTE  uart_port = UART_PORT_B;
/* 设备类型定义 */
#define	D_PSL_641		0x85
#define	D_PSC_641		0x86
#define	D_PSP_642		0x87

T_IED g_ied_list[] =
{
	{1,  x103_service, D_PSL_641,	0,	{172,20,10,1,1,1}},
	{2,  x103_service, D_PSL_641,	0,	{172,20,10,2,1,2}},
	{3,  x103_service, D_PSL_641,	0,	{172,20,10,3,1,3}},
	{4,  x103_service, D_PSL_641,	0,	{172,20,10,4,1,4}},
	{5,  x103_service, D_PSL_641,	0,	{172,20,10,5,1,5}},
	{6,  x103_service, D_PSL_641,	0,	{172,20,10,6,1,6}},
	{7,  x103_service, D_PSL_641,	0,	{172,20,10,7,1,7}},
	{8,  x103_service, D_PSL_641,	0,	{172,20,10,8,1,8}},
	{9,  x103_service, D_PSL_641,	0,	{172,20,10,9,1,9}},
	{10,  x103_service, D_PSL_641,	0,	{172,20,10,10,1,10}},
	{11,  x103_service, D_PSL_641,	0,	{172,20,10,11,1,11}},
	{12,  x103_service, D_PSL_641,	0,	{172,20,10,12,1,12}},//psl641
	{13,  x103_service, D_PSC_641,	0,	{172,20,10,13,1,13}},//1#drq
	{14,  x103_service, D_PSC_641,	0,	{172,20,10,14,1,14}},//2#电容器
	{15,  x103_service, D_PSC_641,	0,	{172,20,10,15,1,15}},//3#电容器
	{16,  x103_service, D_PSC_641,	0,	{172,20,10,16,1,16}},//4#电容器
	{17,  x103_service, D_PSL_641,	0,	{172,20,10,17,1,17}},//母联
	{18,  x103_service, D_PSP_642,	0,	{172,20,10,18,1,18}},//备投
	{19,  x103_service, 194,	0,	{172,20,0,1,1,19}},
	{20,  x103_service, 195,	0,	{172,20,0,2,1,20}},
	{21,  x103_service, 196,	0,	{172,20,0,3,4,21}},
	{22,  x103_service, 194,	0,	{172,20,0,4,1,22}},
	{23,  x103_service, 195,	0,	{172,20,0,5,1,23}},
	{24,  x103_service, 196,	0,	{172,20,0,6,4,24}},
	{25,  x103_service, 196,	0,	{172,20,0,7,4,25}},	
};


WORD g_ied_num =sizeof(g_ied_list)/sizeof(T_IED);

BOOL IED_Initialize()
{
	return DEV_Create_IED(g_ied_list, g_ied_num);
}