dcc_reverse

EPIC IRC客户端。来源于IRCII客户端但做了很多性能和功能的优化。

A treatise on DCC REVERSE
Prepared on May 9, 2002
$EPIC: DCC_REVERSE,v 1.4 2002/05/13 21:45:42 jnelson Exp $
-------------------------------------------------------------------------------

Prologue
--------
All p2p (peer-to-peer) systems fundamentally revolve around two clients
making a bi-lateral internet connection and swapping data across that 
connection.  On a technical IP level, this requires that one of the peers
act as a server and one of the peers acts as a client.  In this age the 
proliferation of firewalls (both voluntary and involuntary) make it 
more difficult to act as an internet server.

About DCC
---------
DCC (Direct Client Connection) is the internet's oldest semi-anonymous
p2p data transmission mechanism, dating back to 1991.  It is rooted in 
and part of the IRC culture and so is widely available in IRC clients.  
There are two applications of DCC: one is to exchange text messages 
directly with another user (without sending them through normal IRC 
channels), and the other is to share a file with another user.  The
DCC specification limits conforming implementations to use IPv4 only.

The Problem
-----------
The construction of the DCC system requires that the peer who wishes to 
share his file with another peer must have the ability to act as an 
internet server.  Some users are unable to act as internet servers and 
thus cannot share files via the DCC system.

A modest proposal
-----------------
It would be adventageous for a user who wishes to share a file with 
another user to be able to do so without having the requirement of 
being an internet server.  A user should be able to ask offer a file
to another user coupled with a request for the other user to act as
the server.  The direction of this connection is thus "reversed" where
the reciever is the server and the sender is the client.


STAGE ONE: The offer
--------------------
The sender may send to the reciever some such handshake:

	PRIVMSG reciever :^ADCC REVERSE <name> <size> <key>^A\r\n

Where the symbolic tags have the following meaning:
<name>  - The name of the file with no directory components.
<size>  - The size in full of the file.  Number is represented as ascii
          digit characters.  The number may be a 64 bit integer.
<key>   - A string containing random characters with ascii values 33 to 
          126 inclusive chosen by the sender.  The <key> may be from 1
          to 50 characters in length, but 12 is probably a good size.
	  The purpose of this key is to act as a unique identification
	  mark for the transaction and to authenticate the legitimacy
	  of an assent from the other peer.  The client should avoid 
	  using duplicate keys.

STAGE TWO: The response
-----------------------
If the recipient wishes to reject the offer he may send an affirmative
cancellation of the offer by a *CTCP REPLY*:

	NOTICE sender :^ADCC REJECT REVERSE <key>^A\r\n

If the recipient wishes to indicate his assent to the transfer, he may
do so by sending back a *CTCP REPLY*:

	NOTICE sender :^ADCC REVERSE <key> <start> <p-addr> <port>^A\r\n

Where the symbolic tags have the following meaning:
<key>    - The exact same <key> as passed in the original handshake.
	   Please see notes on "Unrequested reverse transfers" below.
<start>  - The number of characters at the beginning of the file that the
	   reciever wishes the sender to skip.  This permits a "restart" of
	   a previously canceled transfer from the place the transfer was lost.
           Ordinarily, this value would be 0 to recieve the entire file.
<p-addr> - A "presentation address" representing the reciepient's IP address;
           either a dotted-quad string for IPv4 (A.B.C.D), or a colon-separated
	   string for IPv6 (A::B::C).
<port>   - The port where the reciepient is listening for a connection.  This
	   must be as ascii digits, in host order ("human readable").

Please see APPENDIX 1 for information how to parse this data.

STAGE THREE: The connection
---------------------------
It is acceptable for the sender's client to immediately begin the transmission
upon the receipt of any legitimite assent.  It is acceptable for the sender's
client to require the sender to affirmatively begin the transmission.  In 
either case, the sender is permitted the privelege of revoking the offer 
by sending an affirmative cancellation of the offer by a *CTCP REPLY*:

	NOTICE reciever :^ADCC REJECT REVERSE <key>^A\r\n

If the sender has not revoked the offer, the sender's client is to connect
to the recipient's client using the address and port given by the DCC REVERSE
reply.  If the connection cannot be established, the sender's client may send
an affirmative cancellation to the sender in the manner described above.

Once the connection has been successfully established, the transmission
shall continue as though the connection had been established via DCC SEND.


UNREQUESTED REVERSE TRANSFERS: [WORK IN PROGRESS]
-------------------------------------------------
There may be circumstances where it is more convenient for a reciever to
ask for a specific file from a sender than it is to wait for the sender
to extend an offer to transmit.  An "unrequested reverse transfer" is 
a request by a receiver to be sent a file without having received an 
invitation.  A reciever may make an unrequested reverse transfer by sending
a *CTCP REPLY*:

	NOTICE sender :^ADCC REVERSE <key> <start> <p-addr> <port>^A\r\n

Where the symbolic tags have the same meanings as in STAGE TWO, except that
<key> shall be made up by the the reciepient. [PROBLEM] There is no way to
identify the file you want.  Should DCC REVERSE assents be extended to 
include the filename, or should unrequested reverse transfers not be accepted?
Even if we did include the filename, how would you map that to a file on
the local filesystem?  There could be many such filenames present [PROBLEM]

It would be unwise for a client to automatically accept unrequested reverse
transfers because malicious users could transfer sensitive data from the
receiver's machine without their affirmative consent.

Notwithstanding this, a client may choose to present an unrequested reverse
transfer to the user for their assent.  If the user assents to the transfer,
the connection shall proceed directly to STAGE THREE.

Unrequested reverse transfers might be useful for clients to automatically
requested that a transmission that failed to complete be restarted.

Clients are under no obligation to accept or present unrequested reverse 
transfers or to their user.  They may silently ignore them.  Sending back
a DCC REJECT is not encouraged unless it is rate-throttled, to prevent
floodnet attacks.

APPENDIX 1: PARSING DCC REVERSE HANDSHAKES
------------------------------------------
The DCC REVERSE affirmation has the following form:

	NOTICE sender :^ADCC REVERSE <key> <start> <p-addr> <port>^A\r\n

You may save the <p-addr> and <port> data by using the following code:
(This code is placed into the public domain and may be used for any purpose)

	int retcode;
	struct addrinfo hints;
	struct addrinfo *ai;
	struct sockaddr_storage ss;
	int sslen;

	/* AI_NUMERICHOST means that we are giving it a p-addr */
	/* PF_UNSPEC means we don't care if it's IPv4 or IPv6 */
	memset(&hints, 0, sizeof(hints));
	hints.ai_flags = AI_NUMERICHOST;
	hints.ai_family = PF_UNSPEC;
	hints.ai_socktype = SOCK_STREAM;
	hints.ai_protocol = 0;

	if ((retval = getaddrinfo(p_addr, port, &hints, &ai))) {
		/* Error is in gai_strerror(error) */
	}

	/* 
	 * Save the (struct sockaddr *) by copying it into a 
	 * (struct sockaddr_storage), which we will use later in connect().
	 * And no, I don't believe in using memcpy() for this.
	 */
	ss = *(struct sockaddr_storage *)ai->ai_addr;

	/*
	 * connect() double checks to make sure that the address family 
	 * in the sockaddr agrees with this length.  Save this value or
	 * otherwise we'll have to figure out again later.
	 */
	sslen = ai->ai_addrlen;

	freeaddrinfo(ai);

You may then later go back and connect to the receiver with:

	struct sockaddr *sa;

	sa = (struct sockaddr *)&ss;
	if ((fd = socket(sa->sa_family, SOCK_STREAM, 0))) {
		/* Socket failed */
	}
	if (connect(fd, sa, sslen)) {
		/* Connect failed */
	}

#End of document