cat-id-tbl.c

Util-linux 软件包包含许多工具。其中比较重要的是加载、卸载、格式化、分区和管理硬盘驱动器

  {"\
Done\n\
\n", 983},
  {"\
You have %d active primary partitions. This does not matter for LILO,\n\
but the DOS MBR will only boot a disk with 1 active partition.\n", 984},
  {"partition %s has id %x and is not hidden\n", 985},
  {"Bad Id %lx\n", 986},
  {"This disk is currently in use.\n", 987},
  {"Fatal error: cannot find %s\n", 988},
  {"Warning: %s is not a block device\n", 989},
  {"Checking that no-one is using this disk right now ...\n", 990},
  {"\
\n\
This disk is currently in use - repartitioning is probably a bad idea.\n\
Umount all file systems, and swapoff all swap partitions on this disk.\n\
Use the --no-reread flag to suppress this check.\n", 991},
  {"Use the --force flag to overrule all checks.\n", 992},
  {"OK\n", 993},
  {"Old situation:\n", 994},
  {"Partition %d does not exist, cannot change it\n", 995},
  {"New situation:\n", 996},
  {"\
I don't like these partitions - nothing changed.\n\
(If you really want this, use the --force option.)\n", 997},
  {"I don't like this - probably you should answer No\n", 998},
  {"Are you satisfied with this? [ynq] ", 999},
  {"Do you want to write this to disk? [ynq] ", 1000},
  {"\
\n\
sfdisk: premature end of input\n", 1001},
  {"Quitting - nothing changed\n", 1002},
  {"Please answer one of y,n,q\n", 1003},
  {"\
Successfully wrote the new partition table\n\
\n", 1004},
  {"\
If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)\n\
to zero the first 512 bytes:  dd if=/dev/zero of=/dev/foo7 bs=512 count=1\n\
(See fdisk(8).)\n", 1005},
  {"Try `getopt --help' for more information.\n", 1006},
  {"empty long option after -l or --long argument", 1007},
  {"unknown shell after -s or --shell argument", 1008},
  {"Usage: getopt optstring parameters\n", 1009},
  {"       getopt [options] [--] optstring parameters\n", 1010},
  {"       getopt [options] -o|--options optstring [options] [--]\n", 1011},
  {"              parameters\n", 1012},
  {"\
  -a, --alternative            Allow long options starting with single -\n", 1013},
  {"  -h, --help                   This small usage guide\n", 1014},
  {"  -l, --longoptions=longopts   Long options to be recognized\n", 1015},
  {"\
  -n, --name=progname          The name under which errors are reported\n", 1016},
  {"  -o, --options=optstring      Short options to be recognized\n", 1017},
  {"  -q, --quiet                  Disable error reporting by getopt(3)\n", 1018},
  {"  -Q, --quiet-output           No normal output\n", 1019},
  {"  -s, --shell=shell            Set shell quoting conventions\n", 1020},
  {"  -T, --test                   Test for getopt(1) version\n", 1021},
  {"  -u, --unqote                 Do not quote the output\n", 1022},
  {"  -V, --version                Output version information\n", 1023},
  {"missing optstring argument", 1024},
  {"getopt (enhanced) 1.1.3\n", 1025},
  {"internal error, contact the author.", 1026},
  {"booted from MILO\n", 1027},
  {"Ruffian BCD clock\n", 1028},
  {"clockport adjusted to 0x%x\n", 1029},
  {"funky TOY!\n", 1030},
  {"%s: atomic %s failed for 1000 iterations!", 1031},
  {"Cannot open /dev/port: %s", 1032},
  {"I failed to get permission because I didn't try.\n", 1033},
  {"%s is unable to get I/O port access:  the iopl(3) call failed.\n", 1034},
  {"Probably you need root privileges.\n", 1035},
  {"Assuming hardware clock is kept in %s time.\n", 1036},
  {"UTC", 1037},
  {"local", 1038},
  {"%s: Warning: unrecognized third line in adjtime file\n", 1039},
  {"(Expected: `UTC' or `LOCAL' or nothing.)\n", 1040},
  {"Last drift adjustment done at %ld seconds after 1969\n", 1041},
  {"Last calibration done at %ld seconds after 1969\n", 1042},
  {"Hardware clock is on %s time\n", 1043},
  {"unknown", 1044},
  {"Waiting for clock tick...\n", 1045},
  {"...got clock tick\n", 1046},
  {"Invalid values in hardware clock: %4d/%.2d/%.2d %.2d:%.2d:%.2d\n", 1047},
  {"Hw clock time : %4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld seconds since 1969\n", 1048},
  {"Time read from Hardware Clock: %4d/%.2d/%.2d %02d:%02d:%02d\n", 1049},
  {"Setting Hardware Clock to %.2d:%.2d:%.2d = %ld seconds since 1969\n", 1050},
  {"Clock not changed - testing only.\n", 1051},
  {"\
Time elapsed since reference time has been %.6f seconds.\n\
Delaying further to reach the next full second.\n", 1052},
  {"\
The Hardware Clock registers contain values that are either invalid (e.g. \
50th day of month) or beyond the range we can handle (e.g. Year 2095).\n", 1053},
  {"%s  %.6f seconds\n", 1054},
  {"No --date option specified.\n", 1055},
  {"--date argument too long\n", 1056},
  {"\
The value of the --date option is not a valid date.\n\
In particular, it contains quotation marks.\n", 1057},
  {"Issuing date command: %s\n", 1058},
  {"Unable to run 'date' program in /bin/sh shell. popen() failed", 1059},
  {"response from date command = %s\n", 1060},
  {"\
The date command issued by %s returned unexpected results.\n\
The command was:\n\
  %s\n\
The response was:\n\
  %s\n", 1061},
  {"\
The date command issued by %s returned something other than an integer where \
the converted time value was expected.\n\
The command was:\n\
  %s\n\
The response was:\n\
 %s\n", 1062},
  {"date string %s equates to %ld seconds since 1969.\n", 1063},
  {"\
The Hardware Clock does not contain a valid time, so we cannot set the \
System Time from it.\n", 1064},
  {"Calling settimeofday:\n", 1065},
  {"\ttv.tv_sec = %ld, tv.tv_usec = %ld\n", 1066},
  {"\ttz.tz_minuteswest = %d\n", 1067},
  {"Not setting system clock because running in test mode.\n", 1068},
  {"Must be superuser to set system clock.\n", 1069},
  {"settimeofday() failed", 1070},
  {"\
Not adjusting drift factor because the Hardware Clock previously contained \
garbage.\n", 1071},
  {"\
Not adjusting drift factor because last calibration time is zero,\n\
so history is bad and calibration startover is necessary.\n", 1072},
  {"\
Not adjusting drift factor because it has been less than a day since the \
last calibration.\n", 1073},
  {"\
Clock drifted %.1f seconds in the past %d seconds in spite of a drift factor \
of %f seconds/day.\n\
Adjusting drift factor by %f seconds/day\n", 1074},
  {"Time since last adjustment is %d seconds\n", 1075},
  {"Need to insert %d seconds and refer time back %.6f seconds ago\n", 1076},
  {"Not updating adjtime file because of testing mode.\n", 1077},
  {"\
Would have written the following to %s:\n\
%s", 1078},
  {"Drift adjustment parameters not updated.\n", 1079},
  {"\
The Hardware Clock does not contain a valid time, so we cannot adjust it.\n", 1080},
  {"Needed adjustment is less than one second, so not setting clock.\n", 1081},
  {"Using %s.\n", 1082},
  {"No usable clock interface found.\n", 1083},
  {"Unable to set system clock.\n", 1084},
  {"\
The kernel keeps an epoch value for the Hardware Clock only on an Alpha \
machine.\n\
This copy of hwclock was built for a machine other than Alpha\n\
(and thus is presumably not running on an Alpha now).  No action taken.\n", 1085},
  {"Unable to get the epoch value from the kernel.\n", 1086},
  {"Kernel is assuming an epoch value of %lu\n", 1087},
  {"\
To set the epoch value, you must use the 'epoch' option to tell to what \
value to set it.\n", 1088},
  {"Not setting the epoch to %d - testing only.\n", 1089},
  {"Unable to set the epoch value in the kernel.\n", 1090},
  {"\
hwclock - query and set the hardware clock (RTC)\n\
\n\
Usage: hwclock [function] [options...]\n\
\n\
Functions:\n\
  --help        show this help\n\
  --show        read hardware clock and print result\n\
  --set         set the rtc to the time given with --date\n\
  --hctosys     set the system time from the hardware clock\n\
  --systohc     set the hardware clock to the current system time\n\
  --adjust      adjust the rtc to account for systematic drift since \n\
                the clock was last set or adjusted\n\
  --getepoch    print out the kernel's hardware clock epoch value\n\
  --setepoch    set the kernel's hardware clock epoch value to the \n\
                value given with --epoch\n\
  --version     print out the version of hwclock to stdout\n\
\n\
Options: \n\
  --utc         the hardware clock is kept in coordinated universal time\n\
  --localtime   the hardware clock is kept in local time\n\
  --directisa   access the ISA bus directly instead of %s\n\
  --badyear     ignore rtc's year because the bios is broken\n\
  --date        specifies the time to which to set the hardware clock\n\
  --epoch=year  specifies the year which is the beginning of the \n\
                hardware clock's epoch value\n\
  --noadjfile   do not access /etc/adjtime. Requires the use of\n\
                either --utc or --localtime\n", 1091},
  {"\
  --jensen, --arc, --srm, --funky-toy\n\
                tell hwclock the type of alpha you have (see hwclock(8))\n", 1092},
  {"%s takes no non-option arguments.  You supplied %d.\n", 1093},
  {"\
You have specified multiple functions.\n\
You can only perform one function at a time.\n", 1094},
  {"\
%s: The --utc and --localtime options are mutually exclusive.  You specified \
both.\n", 1095},
  {"\
%s: The --adjust and --noadjfile options are mutually exclusive.  You \
specified both.\n", 1096},
  {"%s: With --noadjfile, you must specify either --utc or --localtime\n", 1097},
  {"No usable set-to time.  Cannot set clock.\n", 1098},
  {"Sorry, only the superuser can change the Hardware Clock.\n", 1099},
  {"Sorry, only the superuser can change the System Clock.\n", 1100},
  {"\
Sorry, only the superuser can change the Hardware Clock epoch in the \
kernel.\n", 1101},
  {"Cannot access the Hardware Clock via any known method.\n", 1102},
  {"\
Use the --debug option to see the details of our search for an access \
method.\n", 1103},
  {"Waiting in loop for time from KDGHWCLK to change\n", 1104},
  {"KDGHWCLK ioctl to read time failed", 1105},
  {"Timed out waiting for time change.\n", 1106},
  {"KDGHWCLK ioctl to read time failed in loop", 1107},
  {"ioctl() failed to read time from %s", 1108},
  {"ioctl KDSHWCLK failed", 1109},
  {"Can't open /dev/tty1 or /dev/vc/1", 1110},
  {"KDGHWCLK ioctl failed", 1111},
  {"open() of %s failed", 1112},
  {"ioctl() to %s to read the time failed.\n", 1113},
  {"Waiting in loop for time from %s to change\n", 1114},
  {"%s does not have interrupt functions. ", 1115},
  {"read() to %s to wait for clock tick failed", 1116},
  {"select() to %s to wait for clock tick failed", 1117},
  {"select() to %s to wait for clock tick timed out\n", 1118},
  {"ioctl() to %s to turn off update interrupts failed", 1119},
  {"ioctl() to %s to turn on update interrupts failed unexpectedly", 1120},
  {"ioctl() to %s to set the time failed.\n", 1121},
  {"ioctl(%s) was successful.\n", 1122},
  {"Open of %s failed", 1123},
  {"\
To manipulate the epoch value in the kernel, we must access the Linux 'rtc' \
device driver via the device special file %s.  This file does not exist on \
this system.\n", 1124},
  {"Unable to open %s", 1125},
  {"ioctl(RTC_EPOCH_READ) to %s failed", 1126},
  {"we have read epoch %ld from %s with RTC_EPOCH_READ ioctl.\n", 1127},
  {"The epoch value may not be less than 1900.  You requested %ld\n", 1128},
  {"setting epoch to %ld with RTC_EPOCH_SET ioctl to %s.\n", 1129},
  {"\
The kernel device driver for %s does not have the RTC_EPOCH_SET ioctl.\n", 1130},
  {"ioctl(RTC_EPOCH_SET) to %s failed", 1131},
  {"calling open_tty\n", 1132},
  {"calling termio_init\n", 1133},
  {"writing init string\n", 1134},
  {"before autobaud\n", 1135},
  {"waiting for cr-lf\n", 1136},
  {"read %c\n", 1137},
  {"reading login name\n", 1138},
  {"%s: can't exec %s: %m", 1139},
  {"can't malloc initstring", 1140},
  {"bad timeout value: %s", 1141},
  {"after getopt loop\n", 1142},
  {"exiting parseargs\n", 1143},
  {"entered parse_speeds\n", 1144},
  {"bad speed: %s", 1145},
  {"too many alternate speeds", 1146},
  {"exiting parsespeeds\n", 1147},
  {"/dev: chdir() failed: %m", 1148},
  {"/dev/%s: not a character device", 1149},
  {"open(2)\n", 1150},
  {"/dev/%s: cannot open as standard input: %m", 1151},
  {"%s: not open for read/write", 1152},
  {"duping\n", 1153},
  {"%s: dup problem: %m", 1154},
  {"term_io 2\n", 1155},
  {"user", 1156},
  {"users", 1157},
  {"%s: read: %m", 1158},
  {"%s: input overrun", 1159},
  {"\
Usage: %s [-hiLmw] [-l login_program] [-t timeout] [-I initstring] [-H \
login_host] baud_rate,... line [termtype]\n\
or\t[-hiLmw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] \
line baud_rate,... [termtype]\n", 1160},
  {"login: memory low, login may fail\n", 1161},
  {"can't malloc for ttyclass", 1162},
  {"can't malloc for grplist", 1163},
  {"Login on %s from %s denied by default.\n", 1164},
  {"Login on %s from %s denied.\n", 1165},
  {"%s: you (user %d) don't exist.\n", 1166},
  {"%s: user \"%s\" does not exist.\n", 1167},
  {"%s: can only change local entries; use yp%s instead.\n", 1168},
  {"Unknown user context", 1169},
  {"%s: %s is not authorized to change the finger info of %s\n", 1170},
  {"%s: Can't set default context for /etc/passwd", 1171},
  {"Changing finger information for %s.\n", 1172},
  {"Password error.", 1173},
  {"Password: ", 1174},
  {"Incorrect password.", 1175},
  {"Finger information not changed.\n", 1176},
  {"Usage: %s [ -f full-name ] [ -o office ] ", 1177},
  {"\
[ -p office-phone ]\n\
\t[ -h home-phone ] ", 1178},
  {"[ --help ] [ --version ]\n", 1179},
  {"\
\n\
Aborted.\n", 1180},
  {"field is too long.\n", 1181},
  {"'%c' is not allowed.\n", 1182},
  {"Control characters are not allowed.\n", 1183},
  {"Finger information *NOT* changed.  Try again later.\n", 1184},
  {"Finger information changed.\n", 1185},
  {"malloc failed", 1186},
  {"%s: %s is not authorized to change the shell of %s\n", 1187},
  {"\
%s: Running UID doesn't match UID of user we're altering, shell change \
denied\n", 1188},
  {"%s: Your shell is not in /etc/shells, shell change denied\n", 1189},
  {"Changing shell for %s.\n", 1190},
  {"New shell", 1191},
  {"Shell not changed.\n", 1192},
  {"Shell *NOT* changed.  Try again later.\n", 1193},
  {"Shell changed.\n", 1194},
  {"\
Usage: %s [ -s shell ] [ --list-shells ] [ --help ] [ --version ]\n\
       [ username ]\n", 1195},
  {"%s: shell must be a full path name.\n", 1196},
  {"%s: \"%s\" does not exist.\n", 1197},
  {"%s: \"%s\" is not executable.\n", 1198},
  {"%s: '%c' is not allowed.\n", 1199},
  {"%s: Control characters ar