cat-id-tbl.c

Util-linux 软件包包含许多工具。其中比较重要的是加载、卸载、格式化、分区和管理硬盘驱动器

  {"Autoconfigure failed.\n", 727},
  {"Sectors/track", 728},
  {"Alternate cylinders", 729},
  {"Physical cylinders", 730},
  {"Rotation speed (rpm)", 731},
  {"Interleave factor", 732},
  {"Extra sectors per cylinder", 733},
  {"You may change all the disk params from the x menu", 734},
  {"3,5\" floppy", 735},
  {"Linux custom", 736},
  {"Partition %d doesn't end on cylinder boundary\n", 737},
  {"Partition %d overlaps with others in sectors %d-%d\n", 738},
  {"Unused gap - sectors 0-%d\n", 739},
  {"Unused gap - sectors %d-%d\n", 740},
  {"\
Other partitions already cover the whole disk.\n\
Delete some/shrink them before retry.\n", 741},
  {"\
You haven't covered the whole disk with the 3rd partition, but your value\n\
%d %s covers some other partition. Your entry has been changed\n\
to %d %s\n", 742},
  {"\
If you want to maintain SunOS/Solaris compatibility, consider leaving this\n\
partition as Whole disk (5), starting at 0, with %u sectors\n", 743},
  {"\
It is highly recommended that the partition at offset 0\n\
is UFS, EXT2FS filesystem or SunOS swap. Putting Linux swap\n\
there may destroy your partition table and bootblock.\n\
Type YES if you're very sure you would like that partition\n\
tagged with 82 (Linux swap): ", 744},
  {"\
\n\
Disk %s (Sun disk label): %d heads, %d sectors, %d rpm\n\
%d cylinders, %d alternate cylinders, %d physical cylinders\n\
%d extra sects/cyl, interleave %d:1\n\
%s\n\
Units = %s of %d * 512 bytes\n\
\n", 745},
  {"\
\n\
Disk %s (Sun disk label): %d heads, %d sectors, %d cylinders\n\
Units = %s of %d * 512 bytes\n\
\n", 746},
  {"%*s Flag    Start       End    Blocks   Id  System\n", 747},
  {"Number of alternate cylinders", 748},
  {"Number of physical cylinders", 749},
  {"FAT12", 750},
  {"XENIX root", 751},
  {"XENIX usr", 752},
  {"FAT16 <32M", 753},
  {"Extended", 754},
  {"FAT16", 755},
  {"HPFS/NTFS", 756},
  {"AIX", 757},
  {"AIX bootable", 758},
  {"OS/2 Boot Manager", 759},
  {"W95 FAT32", 760},
  {"W95 FAT32 (LBA)", 761},
  {"W95 FAT16 (LBA)", 762},
  {"W95 Ext'd (LBA)", 763},
  {"OPUS", 764},
  {"Hidden FAT12", 765},
  {"Compaq diagnostics", 766},
  {"Hidden FAT16 <32M", 767},
  {"Hidden FAT16", 768},
  {"Hidden HPFS/NTFS", 769},
  {"AST SmartSleep", 770},
  {"Hidden W95 FAT32", 771},
  {"Hidden W95 FAT32 (LBA)", 772},
  {"Hidden W95 FAT16 (LBA)", 773},
  {"NEC DOS", 774},
  {"Plan 9", 775},
  {"PartitionMagic recovery", 776},
  {"Venix 80286", 777},
  {"PPC PReP Boot", 778},
  {"SFS", 779},
  {"QNX4.x", 780},
  {"QNX4.x 2nd part", 781},
  {"QNX4.x 3rd part", 782},
  {"OnTrack DM", 783},
  {"OnTrack DM6 Aux1", 784},
  {"CP/M", 785},
  {"OnTrack DM6 Aux3", 786},
  {"OnTrackDM6", 787},
  {"EZ-Drive", 788},
  {"Golden Bow", 789},
  {"Priam Edisk", 790},
  {"SpeedStor", 791},
  {"GNU HURD or SysV", 792},
  {"Novell Netware 286", 793},
  {"Novell Netware 386", 794},
  {"DiskSecure Multi-Boot", 795},
  {"PC/IX", 796},
  {"Old Minix", 797},
  {"Minix / old Linux", 798},
  {"Linux swap / Solaris", 799},
  {"OS/2 hidden C: drive", 800},
  {"Linux extended", 801},
  {"NTFS volume set", 802},
  {"Amoeba", 803},
  {"Amoeba BBT", 804},
  {"BSD/OS", 805},
  {"IBM Thinkpad hibernation", 806},
  {"FreeBSD", 807},
  {"OpenBSD", 808},
  {"NeXTSTEP", 809},
  {"Darwin UFS", 810},
  {"NetBSD", 811},
  {"Darwin boot", 812},
  {"BSDI fs", 813},
  {"BSDI swap", 814},
  {"Boot Wizard hidden", 815},
  {"Solaris boot", 816},
  {"Solaris", 817},
  {"DRDOS/sec (FAT-12)", 818},
  {"DRDOS/sec (FAT-16 < 32M)", 819},
  {"DRDOS/sec (FAT-16)", 820},
  {"Syrinx", 821},
  {"Non-FS data", 822},
  {"CP/M / CTOS / ...", 823},
  {"Dell Utility", 824},
  {"BootIt", 825},
  {"DOS access", 826},
  {"DOS R/O", 827},
  {"BeOS fs", 828},
  {"EFI GPT", 829},
  {"EFI (FAT-12/16/32)", 830},
  {"Linux/PA-RISC boot", 831},
  {"DOS secondary", 832},
  {"LANstep", 833},
  {"BBT", 834},
  {"seek error on %s - cannot seek to %lu\n", 835},
  {"seek error: wanted 0x%08x%08x, got 0x%08x%08x\n", 836},
  {"out of memory - giving up\n", 837},
  {"read error on %s - cannot read sector %lu\n", 838},
  {"ERROR: sector %lu does not have an msdos signature\n", 839},
  {"write error on %s - cannot write sector %lu\n", 840},
  {"cannot open partition sector save file (%s)\n", 841},
  {"write error on %s\n", 842},
  {"cannot stat partition restore file (%s)\n", 843},
  {"partition restore file has wrong size - not restoring\n", 844},
  {"out of memory?\n", 845},
  {"cannot open partition restore file (%s)\n", 846},
  {"error reading %s\n", 847},
  {"cannot open device %s for writing\n", 848},
  {"error writing sector %lu on %s\n", 849},
  {"Disk %s: cannot get geometry\n", 850},
  {"Disk %s: cannot get size\n", 851},
  {"\
Warning: start=%lu - this looks like a partition rather than\n\
the entire disk. Using fdisk on it is probably meaningless.\n\
[Use the --force option if you really want this]\n", 852},
  {"Warning: HDIO_GETGEO says that there are %lu heads\n", 853},
  {"Warning: HDIO_GETGEO says that there are %lu sectors\n", 854},
  {"Warning: BLKGETSIZE/HDIO_GETGEO says that there are %lu cylinders\n", 855},
  {"\
Warning: unlikely number of sectors (%lu) - usually at most 63\n\
This will give problems with all software that uses C/H/S addressing.\n", 856},
  {"\
\n\
Disk %s: %lu cylinders, %lu heads, %lu sectors/track\n", 857},
  {"\
%s of partition %s has impossible value for head: %lu (should be in 0-%lu)\n", 858},
  {"\
%s of partition %s has impossible value for sector: %lu (should be in 1-%\
lu)\n", 859},
  {"\
%s of partition %s has impossible value for cylinders: %lu (should be in 0-%\
lu)\n", 860},
  {"\
Id  Name\n\
\n", 861},
  {"Re-reading the partition table ...\n", 862},
  {"\
The command to re-read the partition table failed\n\
Reboot your system now, before using mkfs\n", 863},
  {"Error closing %s\n", 864},
  {"%s: no such partition\n", 865},
  {"unrecognized format - using sectors\n", 866},
  {"# partition table of %s\n", 867},
  {"unimplemented format - using %s\n", 868},
  {"\
Units = cylinders of %lu bytes, blocks of 1024 bytes, counting from %d\n\
\n", 869},
  {"   Device Boot Start     End   #cyls    #blocks   Id  System\n", 870},
  {"\
Units = sectors of 512 bytes, counting from %d\n\
\n", 871},
  {"   Device Boot    Start       End   #sectors  Id  System\n", 872},
  {"\
Units = blocks of 1024 bytes, counting from %d\n\
\n", 873},
  {"   Device Boot   Start       End    #blocks   Id  System\n", 874},
  {"\
Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from %d\n\
\n", 875},
  {"   Device Boot Start   End    MiB    #blocks   Id  System\n", 876},
  {"\t\tstart: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n", 877},
  {"\t\tend: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n", 878},
  {"partition ends on cylinder %ld, beyond the end of the disk\n", 879},
  {"No partitions found\n", 880},
  {"\
Warning: The partition table looks like it was made\n\
  for C/H/S=*/%ld/%ld (instead of %ld/%ld/%ld).\n\
For this listing I'll assume that geometry.\n", 881},
  {"no partition table present.\n", 882},
  {"strange, only %d partitions defined.\n", 883},
  {"Warning: partition %s has size 0 but is not marked Empty\n", 884},
  {"Warning: partition %s has size 0 and is bootable\n", 885},
  {"Warning: partition %s has size 0 and nonzero start\n", 886},
  {"Warning: partition %s ", 887},
  {"is not contained in partition %s\n", 888},
  {"Warning: partitions %s ", 889},
  {"and %s overlap\n", 890},
  {"\
Warning: partition %s contains part of the partition table (sector %lu),\n\
and will destroy it when filled\n", 891},
  {"Warning: partition %s starts at sector 0\n", 892},
  {"Warning: partition %s extends past end of disk\n", 893},
  {"\
Among the primary partitions, at most one can be extended\n\
 (although this is not a problem under Linux)\n", 894},
  {"Warning: partition %s does not start at a cylinder boundary\n", 895},
  {"Warning: partition %s does not end at a cylinder boundary\n", 896},
  {"\
Warning: more than one primary partition is marked bootable (active)\n\
This does not matter for LILO, but the DOS MBR will not boot this disk.\n", 897},
  {"\
Warning: usually one can boot from primary partitions only\n\
LILO disregards the `bootable' flag.\n", 898},
  {"\
Warning: no primary partition is marked bootable (active)\n\
This does not matter for LILO, but the DOS MBR will not boot this disk.\n", 899},
  {"start", 900},
  {"\
partition %s: start: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n", 901},
  {"end", 902},
  {"partition %s: end: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n", 903},
  {"partition %s ends on cylinder %ld, beyond the end of the disk\n", 904},
  {"\
Warning: shifted start of the extd partition from %ld to %ld\n\
(For listing purposes only. Do not change its contents.)\n", 905},
  {"\
Warning: extended partition does not start at a cylinder boundary.\n\
DOS and Linux will interpret the contents differently.\n", 906},
  {"too many partitions - ignoring those past nr (%d)\n", 907},
  {"tree of partitions?\n", 908},
  {"detected Disk Manager - unable to handle that\n", 909},
  {"DM6 signature found - giving up\n", 910},
  {"strange..., an extended partition of size 0?\n", 911},
  {"strange..., a BSD partition of size 0?\n", 912},
  {" %s: unrecognized partition table type\n", 913},
  {"-n flag was given: Nothing changed\n", 914},
  {"Failed saving the old sectors - aborting\n", 915},
  {"Failed writing the partition on %s\n", 916},
  {"long or incomplete input line - quitting\n", 917},
  {"input error: `=' expected after %s field\n", 918},
  {"input error: unexpected character %c after %s field\n", 919},
  {"unrecognized input: %s\n", 920},
  {"number too big\n", 921},
  {"trailing junk after number\n", 922},
  {"no room for partition descriptor\n", 923},
  {"cannot build surrounding extended partition\n", 924},
  {"too many input fields\n", 925},
  {"No room for more\n", 926},
  {"Illegal type\n", 927},
  {"Warning: given size (%lu) exceeds max allowable size (%lu)\n", 928},
  {"Warning: empty partition\n", 929},
  {"Warning: bad partition start (earliest %lu)\n", 930},
  {"unrecognized bootable flag - choose - or *\n", 931},
  {"partial c,h,s specification?\n", 932},
  {"Extended partition not where expected\n", 933},
  {"bad input\n", 934},
  {"too many partitions\n", 935},
  {"\
Input in the following format; absent fields get a default value.\n\
<start> <size> <type [E,S,L,X,hex]> <bootable [-,*]> <c,h,s> <c,h,s>\n\
Usually you only need to specify <start> and <size> (and perhaps <type>).\n", 936},
  {"version", 937},
  {"Usage: %s [options] device ...\n", 938},
  {"device: something like /dev/hda or /dev/sda", 939},
  {"useful options:", 940},
  {"    -s [or --show-size]: list size of a partition", 941},
  {"    -c [or --id]:        print or change partition Id", 942},
  {"    -l [or --list]:      list partitions of each device", 943},
  {"    -d [or --dump]:      idem, but in a format suitable for later input", 944},
  {"    -i [or --increment]: number cylinders etc. from 1 instead of from 0", 945},
  {"\
    -uS, -uB, -uC, -uM:  accept/report in units of sectors/blocks/cylinders/\
MB", 946},
  {"    -T [or --list-types]:list the known partition types", 947},
  {"    -D [or --DOS]:       for DOS-compatibility: waste a little space", 948},
  {"    -R [or --re-read]:   make kernel reread partition table", 949},
  {"    -N# :                change only the partition with number #", 950},
  {"    -n :                 do not actually write to disk", 951},
  {"\
    -O file :            save the sectors that will be overwritten to file", 952},
  {"    -I file :            restore these sectors again", 953},
  {"    -v [or --version]:   print version", 954},
  {"    -? [or --help]:      print this message", 955},
  {"dangerous options:", 956},
  {"    -g [or --show-geometry]: print the kernel's idea of the geometry", 957},
  {"\
    -x [or --show-extended]: also list extended partitions on output\n\
                             or expect descriptors for them on input", 958},
  {"\
    -L  [or --Linux]:      do not complain about things irrelevant for Linux", 959},
  {"    -q  [or --quiet]:      suppress warning messages", 960},
  {"    You can override the detected geometry using:", 961},
  {"    -C# [or --cylinders #]:set the number of cylinders to use", 962},
  {"    -H# [or --heads #]:    set the number of heads to use", 963},
  {"    -S# [or --sectors #]:  set the number of sectors to use", 964},
  {"You can disable all consistency checking with:", 965},
  {"    -f  [or --force]:      do what I say, even if it is stupid", 966},
  {"Usage:", 967},
  {"%s device\t\t list active partitions on device\n", 968},
  {"%s device n1 n2 ... activate partitions n1 ..., inactivate the rest\n", 969},
  {"%s -An device\t activate partition n, inactivate the other ones\n", 970},
  {"no command?\n", 971},
  {"total: %llu blocks\n", 972},
  {"usage: sfdisk --print-id device partition-number\n", 973},
  {"usage: sfdisk --change-id device partition-number Id\n", 974},
  {"usage: sfdisk --id device partition-number [Id]\n", 975},
  {"can specify only one device (except with -l or -s)\n", 976},
  {"cannot open %s read-write\n", 977},
  {"cannot open %s for reading\n", 978},
  {"%s: OK\n", 979},
  {"%s: %ld cylinders, %ld heads, %ld sectors/track\n", 980},
  {"Cannot get size of %s\n", 981},
  {"bad active byte: 0x%x instead of 0x80\n", 982},