cat-id-tbl.c

Util-linux 软件包包含许多工具。其中比较重要的是加载、卸载、格式化、分区和管理硬盘驱动器

  {"\
Consider leaving partition 9 as volume header (0),\n\
and partition 11 as entire volume (6)as IRIX expects it.\n\
\n", 524},
  {"Changed system type of partition %d to %x (%s)\n", 525},
  {"Partition %d has different physical/logical beginnings (non-Linux?):\n", 526},
  {"     phys=(%d, %d, %d) ", 527},
  {"logical=(%d, %d, %d)\n", 528},
  {"Partition %d has different physical/logical endings:\n", 529},
  {"Partition %i does not start on cylinder boundary:\n", 530},
  {"should be (%d, %d, 1)\n", 531},
  {"Partition %i does not end on cylinder boundary.\n", 532},
  {"should be (%d, %d, %d)\n", 533},
  {"\
\n\
Disk %s: %ld MB, %lld bytes\n", 534},
  {"\
\n\
Disk %s: %ld.%ld GB, %lld bytes\n", 535},
  {"%d heads, %d sectors/track, %d cylinders", 536},
  {", total %llu sectors", 537},
  {"\
Units = %s of %d * %d = %d bytes\n\
\n", 538},
  {"\
Nothing to do. Ordering is correct already.\n\
\n", 539},
  {"\
This doesn't look like a partition table\n\
Probably you selected the wrong device.\n\
\n", 540},
  {"%*s Boot      Start         End      Blocks   Id  System\n", 541},
  {"Device", 542},
  {"\
\n\
Partition table entries are not in disk order\n", 543},
  {"\
\n\
Disk %s: %d heads, %d sectors, %d cylinders\n\
\n", 544},
  {"Nr AF  Hd Sec  Cyl  Hd Sec  Cyl     Start      Size ID\n", 545},
  {"Warning: partition %d contains sector 0\n", 546},
  {"Partition %d: head %d greater than maximum %d\n", 547},
  {"Partition %d: sector %d greater than maximum %d\n", 548},
  {"Partitions %d: cylinder %d greater than maximum %d\n", 549},
  {"Partition %d: previous sectors %d disagrees with total %d\n", 550},
  {"Warning: bad start-of-data in partition %d\n", 551},
  {"Warning: partition %d overlaps partition %d.\n", 552},
  {"Warning: partition %d is empty\n", 553},
  {"Logical partition %d not entirely in partition %d\n", 554},
  {"Total allocated sectors %d greater than the maximum %lld\n", 555},
  {"%lld unallocated sectors\n", 556},
  {"Partition %d is already defined.  Delete it before re-adding it.\n", 557},
  {"First %s", 558},
  {"Sector %d is already allocated\n", 559},
  {"No free sectors available\n", 560},
  {"Last %s or +size or +sizeM or +sizeK", 561},
  {"\
\tSorry - this fdisk cannot handle AIX disk labels.\n\
\tIf you want to add DOS-type partitions, create\n\
\ta new empty DOS partition table first. (Use o.)\n\
\tWARNING: This will destroy the present disk contents.\n", 562},
  {"The maximum number of partitions has been created\n", 563},
  {"You must delete some partition and add an extended partition first\n", 564},
  {"All logical partitions are in use\n", 565},
  {"Adding a primary partition\n", 566},
  {"\
Command action\n\
   %s\n\
   p   primary partition (1-4)\n", 567},
  {"l   logical (5 or over)", 568},
  {"e   extended", 569},
  {"Invalid partition number for type `%c'\n", 570},
  {"\
The partition table has been altered!\n\
\n", 571},
  {"Calling ioctl() to re-read partition table.\n", 572},
  {"\
\n\
WARNING: Re-reading the partition table failed with error %d: %s.\n\
The kernel still uses the old table.\n\
The new table will be used at the next reboot.\n", 573},
  {"\
\n\
WARNING: If you have created or modified any DOS 6.x\n\
partitions, please see the fdisk manual page for additional\n\
information.\n", 574},
  {"Syncing disks.\n", 575},
  {"Partition %d has no data area\n", 576},
  {"New beginning of data", 577},
  {"Expert command (m for help): ", 578},
  {"Number of cylinders", 579},
  {"Number of heads", 580},
  {"Number of sectors", 581},
  {"Warning: setting sector offset for DOS compatiblity\n", 582},
  {"Disk %s doesn't contain a valid partition table\n", 583},
  {"Cannot open %s\n", 584},
  {"cannot open %s\n", 585},
  {"%c: unknown command\n", 586},
  {"This kernel finds the sector size itself - -b option ignored\n", 587},
  {"\
Warning: the -b (set sector size) option should be used with one specified \
device\n", 588},
  {"Detected an OSF/1 disklabel on %s, entering disklabel mode.\n", 589},
  {"Command (m for help): ", 590},
  {"\
\n\
The current boot file is: %s\n", 591},
  {"Please enter the name of the new boot file: ", 592},
  {"Boot file unchanged\n", 593},
  {"\
\n\
\tSorry, no experts menu for SGI partition tables available.\n\
\n", 594},
  {"\
\n\
\tThere is a valid AIX label on this disk.\n\
\tUnfortunately Linux cannot handle these\n\
\tdisks at the moment.  Nevertheless some\n\
\tadvice:\n\
\t1. fdisk will destroy its contents on write.\n\
\t2. Be sure that this disk is NOT a still vital\n\
\t   part of a volume group. (Otherwise you may\n\
\t   erase the other disks as well, if unmirrored.)\n\
\t3. Before deleting this physical volume be sure\n\
\t   to remove the disk logically from your AIX\n\
\t   machine.  (Otherwise you become an AIXpert).", 595},
  {"\
\n\
BSD label for device: %s\n", 596},
  {"   d   delete a BSD partition", 597},
  {"   e   edit drive data", 598},
  {"   i   install bootstrap", 599},
  {"   l   list known filesystem types", 600},
  {"   n   add a new BSD partition", 601},
  {"   p   print BSD partition table", 602},
  {"   s   show complete disklabel", 603},
  {"   t   change a partition's filesystem id", 604},
  {"   u   change units (cylinders/sectors)", 605},
  {"   w   write disklabel to disk", 606},
  {"   x   link BSD partition to non-BSD partition", 607},
  {"Partition %s has invalid starting sector 0.\n", 608},
  {"Reading disklabel of %s at sector %d.\n", 609},
  {"There is no *BSD partition on %s.\n", 610},
  {"BSD disklabel command (m for help): ", 611},
  {"type: %s\n", 612},
  {"type: %d\n", 613},
  {"disk: %.*s\n", 614},
  {"label: %.*s\n", 615},
  {"flags:", 616},
  {" removable", 617},
  {" ecc", 618},
  {" badsect", 619},
  {"bytes/sector: %ld\n", 620},
  {"sectors/track: %ld\n", 621},
  {"tracks/cylinder: %ld\n", 622},
  {"sectors/cylinder: %ld\n", 623},
  {"cylinders: %ld\n", 624},
  {"rpm: %d\n", 625},
  {"interleave: %d\n", 626},
  {"trackskew: %d\n", 627},
  {"cylinderskew: %d\n", 628},
  {"headswitch: %ld\t\t# milliseconds\n", 629},
  {"track-to-track seek: %ld\t# milliseconds\n", 630},
  {"drivedata: ", 631},
  {"\
\n\
%d partitions:\n", 632},
  {"#       start       end      size     fstype   [fsize bsize   cpg]\n", 633},
  {"Writing disklabel to %s.\n", 634},
  {"%s contains no disklabel.\n", 635},
  {"Do you want to create a disklabel? (y/n) ", 636},
  {"bytes/sector", 637},
  {"sectors/track", 638},
  {"tracks/cylinder", 639},
  {"sectors/cylinder", 640},
  {"Must be <= sectors/track * tracks/cylinder (default).\n", 641},
  {"rpm", 642},
  {"interleave", 643},
  {"trackskew", 644},
  {"cylinderskew", 645},
  {"headswitch", 646},
  {"track-to-track seek", 647},
  {"Bootstrap: %sboot -> boot%s (%s): ", 648},
  {"Bootstrap overlaps with disk label!\n", 649},
  {"Bootstrap installed on %s.\n", 650},
  {"Partition (a-%c): ", 651},
  {"This partition already exists.\n", 652},
  {"Warning: too many partitions (%d, maximum is %d).\n", 653},
  {"\
\n\
Syncing disks.\n", 654},
  {"SGI volhdr", 655},
  {"SGI trkrepl", 656},
  {"SGI secrepl", 657},
  {"SGI raw", 658},
  {"SGI bsd", 659},
  {"SGI sysv", 660},
  {"SGI volume", 661},
  {"SGI efs", 662},
  {"SGI lvol", 663},
  {"SGI rlvol", 664},
  {"SGI xfs", 665},
  {"SGI xfslog", 666},
  {"SGI xlv", 667},
  {"SGI xvm", 668},
  {"Linux swap", 669},
  {"Linux native", 670},
  {"Linux LVM", 671},
  {"Linux RAID", 672},
  {"\
According to MIPS Computer Systems, Inc the Label must not contain more than \
512 bytes\n", 673},
  {"Detected sgi disklabel with wrong checksum.\n", 674},
  {"\
\n\
Disk %s (SGI disk label): %d heads, %d sectors\n\
%d cylinders, %d physical cylinders\n\
%d extra sects/cyl, interleave %d:1\n\
%s\n\
Units = %s of %d * 512 bytes\n\
\n", 675},
  {"\
\n\
Disk %s (SGI disk label): %d heads, %d sectors, %d cylinders\n\
Units = %s of %d * 512 bytes\n\
\n", 676},
  {"\
----- partitions -----\n\
Pt# %*s  Info     Start       End   Sectors  Id  System\n", 677},
  {"\
----- Bootinfo -----\n\
Bootfile: %s\n\
----- Directory Entries -----\n", 678},
  {"%2d: %-10s sector%5u size%8u\n", 679},
  {"\
\n\
Invalid Bootfile!\n\
\tThe bootfile must be an absolute non-zero pathname,\n\
\te.g. \"/unix\" or \"/unix.save\".\n", 680},
  {"\
\n\
\tName of Bootfile too long:  16 bytes maximum.\n", 681},
  {"\
\n\
\tBootfile must have a fully qualified pathname.\n", 682},
  {"\
\n\
\tBe aware, that the bootfile is not checked for existence.\n\
\tSGI's default is \"/unix\" and for backup \"/unix.save\".\n", 683},
  {"\
\n\
\tBootfile is changed to \"%s\".\n", 684},
  {"More than one entire disk entry present.\n", 685},
  {"No partitions defined\n", 686},
  {"IRIX likes when Partition 11 covers the entire disk.\n", 687},
  {"\
The entire disk partition should start at block 0,\n\
not at diskblock %d.\n", 688},
  {"\
The entire disk partition is only %d diskblock large,\n\
but the disk is %d diskblocks long.\n", 689},
  {"One Partition (#11) should cover the entire disk.\n", 690},
  {"Partition %d does not start on cylinder boundary.\n", 691},
  {"Partition %d does not end on cylinder boundary.\n", 692},
  {"The Partition %d and %d overlap by %d sectors.\n", 693},
  {"Unused gap of %8u sectors - sectors %8u-%u\n", 694},
  {"\
\n\
The boot partition does not exist.\n", 695},
  {"\
\n\
The swap partition does not exist.\n", 696},
  {"\
\n\
The swap partition has no swap type.\n", 697},
  {"\tYou have chosen an unusual boot file name.\n", 698},
  {"Sorry You may change the Tag of non-empty partitions.\n", 699},
  {"\
It is highly recommended that the partition at offset 0\n\
is of type \"SGI volhdr\", the IRIX system will rely on it to\n\
retrieve from its directory standalone tools like sash and fx.\n\
Only the \"SGI volume\" entire disk section may violate this.\n\
Type YES if you are sure about tagging this partition differently.\n", 700},
  {"YES\n", 701},
  {"Do You know, You got a partition overlap on the disk?\n", 702},
  {"Attempting to generate entire disk entry automatically.\n", 703},
  {"The entire disk is already covered with partitions.\n", 704},
  {"You got a partition overlap on the disk. Fix it first!\n", 705},
  {"\
It is highly recommended that eleventh partition\n\
covers the entire disk and is of type `SGI volume'\n", 706},
  {"You will get a partition overlap on the disk. Fix it first!\n", 707},
  {" Last %s", 708},
  {"\
Building a new SGI disklabel. Changes will remain in memory only,\n\
until you decide to write them. After that, of course, the previous\n\
content will be unrecoverably lost.\n\
\n", 709},
  {"\
Warning:  BLKGETSIZE ioctl failed on %s.  Using geometry cylinder value of %\
d.\n\
This value may be truncated for devices > 33.8 GB.\n", 710},
  {"Trying to keep parameters of partition %d.\n", 711},
  {"ID=%02x\tSTART=%d\tLENGTH=%d\n", 712},
  {"Empty", 713},
  {"SunOS root", 714},
  {"SunOS swap", 715},
  {"SunOS usr", 716},
  {"Whole disk", 717},
  {"SunOS stand", 718},
  {"SunOS var", 719},
  {"SunOS home", 720},
  {"Linux raid autodetect", 721},
  {"\
Detected sun disklabel with wrong checksum.\n\
Probably you'll have to set all the values,\n\
e.g. heads, sectors, cylinders and partitions\n\
or force a fresh label (s command in main menu)\n", 722},
  {"Autoconfigure found a %s%s%s\n", 723},
  {"\
Building a new sun disklabel. Changes will remain in memory only,\n\
until you decide to write them. After that, of course, the previous\n\
content won't be recoverable.\n\
\n", 724},
  {"\
Drive type\n\
   ?   auto configure\n\
   0   custom (with hardware detected defaults)", 725},
  {"Select type (? for auto, 0 for custom): ", 726},