cat-id-tbl.c

Util-linux 软件包包含许多工具。其中比较重要的是加载、卸载、格式化、分区和管理硬盘驱动器

  {"Partition begins before sector 0", 261},
  {"Partition ends before sector 0", 262},
  {"Partition begins after end-of-disk", 263},
  {"Partition ends after end-of-disk", 264},
  {"Partition ends in the final partial cylinder", 265},
  {"logical partitions not in disk order", 266},
  {"logical partitions overlap", 267},
  {"enlarged logical partitions overlap", 268},
  {"\
!!!! Internal error creating logical drive with no extended partition !!!!", 269},
  {"\
Cannot create logical drive here -- would create two extended partitions", 270},
  {"Menu item too long. Menu may look odd.", 271},
  {"Menu without direction. Defaulting horizontal.", 272},
  {"Illegal key", 273},
  {"Press a key to continue", 274},
  {"Primary", 275},
  {"Create a new primary partition", 276},
  {"Logical", 277},
  {"Create a new logical partition", 278},
  {"Cancel", 279},
  {"Don't create a partition", 280},
  {"!!! Internal error !!!", 281},
  {"Size (in MB): ", 282},
  {"Beginning", 283},
  {"Add partition at beginning of free space", 284},
  {"End", 285},
  {"Add partition at end of free space", 286},
  {"No room to create the extended partition", 287},
  {"No partition table.\n", 288},
  {"No partition table. Starting with zero table.", 289},
  {"Bad signature on partition table", 290},
  {"Unknown partition table type", 291},
  {"Do you wish to start with a zero table [y/N] ?", 292},
  {"You specified more cylinders than fit on disk", 293},
  {"Cannot open disk drive", 294},
  {"Opened disk read-only - you have no permission to write", 295},
  {"Cannot get disk size", 296},
  {"Bad primary partition", 297},
  {"Bad logical partition", 298},
  {"Warning!!  This may destroy data on your disk!", 299},
  {"Are you sure you want write the partition table to disk? (yes or no): ", 300},
  {"no", 301},
  {"Did not write partition table to disk", 302},
  {"yes", 303},
  {"Please enter `yes' or `no'", 304},
  {"Writing partition table to disk...", 305},
  {"Wrote partition table to disk", 306},
  {"\
Wrote partition table, but re-read table failed.  Reboot to update table.", 307},
  {"No primary partitions are marked bootable. DOS MBR cannot boot this.", 308},
  {"\
More than one primary partition is marked bootable. DOS MBR cannot boot this.", 309},
  {"Enter filename or press RETURN to display on screen: ", 310},
  {"Cannot open file '%s'", 311},
  {"Disk Drive: %s\n", 312},
  {"Sector 0:\n", 313},
  {"Sector %d:\n", 314},
  {"   None   ", 315},
  {"   Pri/Log", 316},
  {"   Primary", 317},
  {"   Logical", 318},
  {"Unknown", 319},
  {"Boot", 320},
  {"(%02X)", 321},
  {"None", 322},
  {"Partition Table for %s\n", 323},
  {"               First       Last\n", 324},
  {"\
 # Type       Sector      Sector   Offset    Length   Filesystem Type (ID) \
Flag\n", 325},
  {"\
-- ------- ----------- ----------- ------ ----------- -------------------- \
----\n", 326},
  {"         ---Starting---      ----Ending----    Start     Number of\n", 327},
  {" # Flags Head Sect Cyl   ID  Head Sect Cyl     Sector    Sectors\n", 328},
  {"-- ----- ---- ---- ---- ---- ---- ---- ---- ----------- -----------\n", 329},
  {"Raw", 330},
  {"Print the table using raw data format", 331},
  {"Sectors", 332},
  {"Print the table ordered by sectors", 333},
  {"Table", 334},
  {"Just print the partition table", 335},
  {"Don't print the table", 336},
  {"Help Screen for cfdisk", 337},
  {"This is cfdisk, a curses based disk partitioning program, which", 338},
  {"allows you to create, delete and modify partitions on your hard", 339},
  {"disk drive.", 340},
  {"Copyright (C) 1994-1999 Kevin E. Martin & aeb", 341},
  {"Command      Meaning", 342},
  {"-------      -------", 343},
  {"  b          Toggle bootable flag of the current partition", 344},
  {"  d          Delete the current partition", 345},
  {"  g          Change cylinders, heads, sectors-per-track parameters", 346},
  {"             WARNING: This option should only be used by people who", 347},
  {"             know what they are doing.", 348},
  {"  h          Print this screen", 349},
  {"  m          Maximize disk usage of the current partition", 350},
  {"             Note: This may make the partition incompatible with", 351},
  {"             DOS, OS/2, ...", 352},
  {"  n          Create new partition from free space", 353},
  {"  p          Print partition table to the screen or to a file", 354},
  {"             There are several different formats for the partition", 355},
  {"             that you can choose from:", 356},
  {"                r - Raw data (exactly what would be written to disk)", 357},
  {"                s - Table ordered by sectors", 358},
  {"                t - Table in raw format", 359},
  {"  q          Quit program without writing partition table", 360},
  {"  t          Change the filesystem type", 361},
  {"  u          Change units of the partition size display", 362},
  {"             Rotates through MB, sectors and cylinders", 363},
  {"  W          Write partition table to disk (must enter upper case W)", 364},
  {"             Since this might destroy data on the disk, you must", 365},
  {"             either confirm or deny the write by entering `yes' or", 366},
  {"             `no'", 367},
  {"Up Arrow     Move cursor to the previous partition", 368},
  {"Down Arrow   Move cursor to the next partition", 369},
  {"CTRL-L       Redraws the screen", 370},
  {"  ?          Print this screen", 371},
  {"Note: All of the commands can be entered with either upper or lower", 372},
  {"case letters (except for Writes).", 373},
  {"Cylinders", 374},
  {"Change cylinder geometry", 375},
  {"Heads", 376},
  {"Change head geometry", 377},
  {"Change sector geometry", 378},
  {"Done", 379},
  {"Done with changing geometry", 380},
  {"Enter the number of cylinders: ", 381},
  {"Illegal cylinders value", 382},
  {"Enter the number of heads: ", 383},
  {"Illegal heads value", 384},
  {"Enter the number of sectors per track: ", 385},
  {"Illegal sectors value", 386},
  {"Enter filesystem type: ", 387},
  {"Cannot change FS Type to empty", 388},
  {"Cannot change FS Type to extended", 389},
  {"Unk(%02X)", 390},
  {", NC", 391},
  {"NC", 392},
  {"Pri/Log", 393},
  {"Unknown (%02X)", 394},
  {"Disk Drive: %s", 395},
  {"Size: %lld bytes, %lld MB", 396},
  {"Size: %lld bytes, %lld.%lld GB", 397},
  {"Heads: %d   Sectors per Track: %d   Cylinders: %lld", 398},
  {"Name", 399},
  {"Flags", 400},
  {"Part Type", 401},
  {"FS Type", 402},
  {"[Label]", 403},
  {"    Sectors", 404},
  {"  Cylinders", 405},
  {"  Size (MB)", 406},
  {"  Size (GB)", 407},
  {"Bootable", 408},
  {"Toggle bootable flag of the current partition", 409},
  {"Delete", 410},
  {"Delete the current partition", 411},
  {"Geometry", 412},
  {"Change disk geometry (experts only)", 413},
  {"Help", 414},
  {"Print help screen", 415},
  {"Maximize", 416},
  {"Maximize disk usage of the current partition (experts only)", 417},
  {"New", 418},
  {"Create new partition from free space", 419},
  {"Print", 420},
  {"Print partition table to the screen or to a file", 421},
  {"Quit", 422},
  {"Quit program without writing partition table", 423},
  {"Type", 424},
  {"Change the filesystem type (DOS, Linux, OS/2 and so on)", 425},
  {"Units", 426},
  {"Change units of the partition size display (MB, sect, cyl)", 427},
  {"Write", 428},
  {"Write partition table to disk (this might destroy data)", 429},
  {"Cannot make this partition bootable", 430},
  {"Cannot delete an empty partition", 431},
  {"Cannot maximize this partition", 432},
  {"This partition is unusable", 433},
  {"This partition is already in use", 434},
  {"Cannot change the type of an empty partition", 435},
  {"No more partitions", 436},
  {"Illegal command", 437},
  {"Copyright (C) 1994-2002 Kevin E. Martin & aeb\n", 438},
  {"\
\n\
Usage:\n\
Print version:\n\
        %s -v\n\
Print partition table:\n\
        %s -P {r|s|t} [options] device\n\
Interactive use:\n\
        %s [options] device\n\
\n\
Options:\n\
-a: Use arrow instead of highlighting;\n\
-z: Start with a zero partition table, instead of reading the pt from disk;\n\
-c C -h H -s S: Override the kernel's idea of the number of cylinders,\n\
                the number of heads and the number of sectors/track.\n\
\n", 439},
  {"\
Usage: fdisk [-b SSZ] [-u] DISK     Change partition table\n\
       fdisk -l [-b SSZ] [-u] DISK  List partition table(s)\n\
       fdisk -s PARTITION           Give partition size(s) in blocks\n\
       fdisk -v                     Give fdisk version\n\
Here DISK is something like /dev/hdb or /dev/sda\n\
and PARTITION is something like /dev/hda7\n\
-u: give Start and End in sector (instead of cylinder) units\n\
-b 2048: (for certain MO disks) use 2048-byte sectors\n", 440},
  {"\
Usage: fdisk [-l] [-b SSZ] [-u] device\n\
E.g.: fdisk /dev/hda  (for the first IDE disk)\n\
  or: fdisk /dev/sdc  (for the third SCSI disk)\n\
  or: fdisk /dev/eda  (for the first PS/2 ESDI drive)\n\
  or: fdisk /dev/rd/c0d0  or: fdisk /dev/ida/c0d0  (for RAID devices)\n\
  ...\n", 441},
  {"Unable to open %s\n", 442},
  {"Unable to read %s\n", 443},
  {"Unable to seek on %s\n", 444},
  {"Unable to write %s\n", 445},
  {"BLKGETSIZE ioctl failed on %s\n", 446},
  {"Unable to allocate any more memory\n", 447},
  {"Fatal error\n", 448},
  {"Command action", 449},
  {"   a   toggle a read only flag", 450},
  {"   b   edit bsd disklabel", 451},
  {"   c   toggle the mountable flag", 452},
  {"   d   delete a partition", 453},
  {"   l   list known partition types", 454},
  {"   m   print this menu", 455},
  {"   n   add a new partition", 456},
  {"   o   create a new empty DOS partition table", 457},
  {"   p   print the partition table", 458},
  {"   q   quit without saving changes", 459},
  {"   s   create a new empty Sun disklabel", 460},
  {"   t   change a partition's system id", 461},
  {"   u   change display/entry units", 462},
  {"   v   verify the partition table", 463},
  {"   w   write table to disk and exit", 464},
  {"   x   extra functionality (experts only)", 465},
  {"   a   select bootable partition", 466},
  {"   b   edit bootfile entry", 467},
  {"   c   select sgi swap partition", 468},
  {"   a   toggle a bootable flag", 469},
  {"   c   toggle the dos compatibility flag", 470},
  {"   a   change number of alternate cylinders", 471},
  {"   c   change number of cylinders", 472},
  {"   d   print the raw data in the partition table", 473},
  {"   e   change number of extra sectors per cylinder", 474},
  {"   h   change number of heads", 475},
  {"   i   change interleave factor", 476},
  {"   o   change rotation speed (rpm)", 477},
  {"   r   return to main menu", 478},
  {"   s   change number of sectors/track", 479},
  {"   y   change number of physical cylinders", 480},
  {"   b   move beginning of data in a partition", 481},
  {"   e   list extended partitions", 482},
  {"   g   create an IRIX (SGI) partition table", 483},
  {"   f   fix partition order", 484},
  {"You must set", 485},
  {"heads", 486},
  {"sectors", 487},
  {"cylinders", 488},
  {"\
%s%s.\n\
You can do this from the extra functions menu.\n", 489},
  {" and ", 490},
  {"\
\n\
The number of cylinders for this disk is set to %d.\n\
There is nothing wrong with that, but this is larger than 1024,\n\
and could in certain setups cause problems with:\n\
1) software that runs at boot time (e.g., old versions of LILO)\n\
2) booting and partitioning software from other OSs\n\
   (e.g., DOS FDISK, OS/2 FDISK)\n", 491},
  {"Bad offset in primary extended partition\n", 492},
  {"Warning: omitting partitions after %d\n", 493},
  {"Warning: extra link pointer in partition table %d\n", 494},
  {"Warning: ignoring extra data in partition table %d\n", 495},
  {"\
Building a new DOS disklabel. Changes will remain in memory only,\n\
until you decide to write them. After that, of course, the previous\n\
content won't be recoverable.\n\
\n", 496},
  {"Note: sector size is %d (not %d)\n", 497},
  {"You will not be able to write the partition table.\n", 498},
  {"\
This disk has both DOS and BSD magic.\n\
Give the 'b' command to go to BSD mode.\n", 499},
  {"\
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF \
disklabel\n", 500},
  {"Internal error\n", 501},
  {"Ignoring extra extended partition %d\n", 502},
  {"\
Warning: invalid flag 0x%04x of partition table %d will be corrected by w\
(rite)\n", 503},
  {"\
\n\
got EOF thrice - exiting..\n", 504},
  {"Hex code (type L to list codes): ", 505},
  {"%s (%u-%u, default %u): ", 506},
  {"Using default value %u\n", 507},
  {"Value out of range.\n", 508},
  {"Partition number", 509},
  {"Warning: partition %d has empty type\n", 510},
  {"Selected partition %d\n", 511},
  {"No partition is defined yet!\n", 512},
  {"All primary partitions have been defined already!\n", 513},
  {"cylinder", 514},
  {"sector", 515},
  {"Changing display/entry units to %s\n", 516},
  {"WARNING: Partition %d is an extended partition\n", 517},
  {"DOS Compatibility flag is set\n", 518},
  {"DOS Compatibility flag is not set\n", 519},
  {"Partition %d does not exist yet!\n", 520},
  {"\
Type 0 means free space to many systems\n\
(but not to Linux). Having partitions of\n\
type 0 is probably unwise. You can delete\n\
a partition using the `d' command.\n", 521},
  {"\
You cannot change a partition into an extended one or vice versa\n\
Delete it first.\n", 522},
  {"\
Consider leaving partition 3 as Whole disk (5),\n\
as SunOS/Solaris expects it and even Linux likes it.\n\
\n", 523},