lld.pas

来自「应对服装行业的生产成本控制系统」· PAS 代码 · 共 1,078 行 · 第 1/2 页

unit lld;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, StdCtrls, Buttons, ComCtrls, Grids, DBGrids, ExtCtrls, DBCtrls,
  DB, ADODB, DBClient;

type
  TFrmlld = class(TForm)
    Pz: TPanel;
    Label25: TLabel;
    Label26: TLabel;
    Label28: TLabel;
    Label29: TLabel;
    Label41: TLabel;
    SpeedButton2: TSpeedButton;
    help: TLabel;
    GroupBox4: TGroupBox;
    tddh: TEdit;
    tcldw: TEdit;
    tlldh: TEdit;
    DBGrid2: TDBGrid;
    tclmc: TEdit;
    Label3: TLabel;
    Label4: TLabel;
    Label5: TLabel;
    tdj: TEdit;
    tbz: TEdit;
    tsl: TEdit;
    Label6: TLabel;
    Label7: TLabel;
    Label8: TLabel;
    tclfl: TEdit;
    DBGrid1: TDBGrid;
    Pd: TPanel;
    Label1: TLabel;
    rq: TDateTimePicker;
    Label2: TLabel;
    tje: TEdit;
    pq: TPanel;
    csq: TCheckBox;
    cddh: TCheckBox;
    qddh: TEdit;
    cjglx: TCheckBox;
    csz: TCheckBox;
    sz: TDateTimePicker;
    qjglx: TEdit;
    ckhmc: TCheckBox;
    qkhmc: TEdit;
    ccpmc: TCheckBox;
    qcpmc: TEdit;
    csl: TCheckBox;
    ccpfl: TCheckBox;
    qsl: TEdit;
    qcpfl: TEdit;
    ccpdw: TCheckBox;
    cdj: TCheckBox;
    qcpdw: TEdit;
    qdj: TEdit;
    sq: TDateTimePicker;
    cwgzt: TCheckBox;
    cje: TCheckBox;
    qwgzt: TEdit;
    qje: TEdit;
    Cjq: TCheckBox;
    Cjz: TCheckBox;
    jz: TDateTimePicker;
    jq: TDateTimePicker;
    Panel7: TPanel;
    Label44: TLabel;
    Label45: TLabel;
    Label50: TLabel;
    tfb: TEdit;
    tfz: TEdit;
    tllr: TEdit;
    Label9: TLabel;
    Label10: TLabel;
    tflr: TEdit;
    tzgr: TEdit;
    tggxh: TEdit;
    bnew: TBitBtn;
    bsave: TBitBtn;
    bcancel: TBitBtn;
    bprint: TBitBtn;
    breturn: TBitBtn;
    Bquery: TBitBtn;
    GroupBox1: TGroupBox;
    DBGrid5: TDBGrid;
    DBGrid4: TDBGrid;
    tys: TEdit;
    DBGrid6: TDBGrid;
    DBGrid3: TDBGrid;
    procedure tdjKeyPress(Sender: TObject; var Key: Char);
    procedure tslKeyPress(Sender: TObject; var Key: Char);
    procedure tlldhKeyPress(Sender: TObject; var Key: Char);
    procedure tclmcKeyPress(Sender: TObject; var Key: Char);
    procedure tddhKeyPress(Sender: TObject; var Key: Char);
    procedure tcldwKeyPress(Sender: TObject; var Key: Char);
    procedure tbzKeyPress(Sender: TObject; var Key: Char);
    procedure tclmcChange(Sender: TObject);
    procedure tddhChange(Sender: TObject);
    procedure bcancelClick(Sender: TObject);
    procedure bprintClick(Sender: TObject);
    procedure breturnClick(Sender: TObject);
    procedure DBGrid4DblClick(Sender: TObject);
    procedure DBGrid1TitleClick(Column: TColumn);
    procedure tslChange(Sender: TObject);
    procedure bsaveClick(Sender: TObject);
    procedure FormActivate(Sender: TObject);
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure DBGrid1DrawColumnCell(Sender: TObject; const Rect: TRect;
      DataCol: Integer; Column: TColumn; State: TGridDrawState);
    procedure tclflKeyPress(Sender: TObject; var Key: Char);
    procedure DBGrid3DblClick(Sender: TObject);
    procedure rqKeyPress(Sender: TObject; var Key: Char);
    procedure tjeKeyPress(Sender: TObject; var Key: Char);
    procedure BqueryClick(Sender: TObject);
    procedure DBGrid1DblClick(Sender: TObject);
    procedure bnewClick(Sender: TObject);
    procedure tllrChange(Sender: TObject);
    procedure DBGrid5TitleClick(Column: TColumn);
    procedure DBGrid5DrawColumnCell(Sender: TObject; const Rect: TRect;
      DataCol: Integer; Column: TColumn; State: TGridDrawState);
    procedure SpeedButton2Click(Sender: TObject);
    procedure tfbKeyPress(Sender: TObject; var Key: Char);
    procedure tfzKeyPress(Sender: TObject; var Key: Char);
    procedure tllrKeyPress(Sender: TObject; var Key: Char);
    procedure tflrKeyPress(Sender: TObject; var Key: Char);
    procedure tzgrKeyPress(Sender: TObject; var Key: Char);
    procedure tysKeyPress(Sender: TObject; var Key: Char);
  private
    { Private declarations }
      rzczy,rzsj,rzjsj,rzcsj:string;
      errzt: integer;
      errcode:boolean;
  commandstring,commandstringq: string;
  function check():boolean;
  function khchange():boolean;
  function save():boolean;
  function errdelete():boolean;
  public
    { Public declarations }
  end;

var
  Frmlld: TFrmlld;

implementation

uses unit28, Unit1, Unit16, xtfz, clml, cpml, yg;

{$R *.dfm}

procedure TFrmlld.tdjKeyPress(Sender: TObject; var Key: Char);
begin
if not (key in['0'..'9',#8,#13,'.']) then
begin
key:=#0;
help.caption:='   请输入数字!';
end;
if key=#13 then tje.SetFocus;
end;

procedure TFrmlld.tslKeyPress(Sender: TObject; var Key: Char);
begin
if not (key in['0'..'9',#8,#13,'.','-']) then
begin
key:=#0;
help.caption:='   请输入数字!';
end;
if key=#13 then tdj.SetFocus;
end;

procedure TFrmlld.tlldhKeyPress(Sender: TObject; var Key: Char);
begin
if key=#13 then tys.SetFocus;
end;

procedure TFrmlld.tclmcKeyPress(Sender: TObject; var Key: Char);
begin
if key=#13 then tclfl.SetFocus;
end;

procedure TFrmlld.tddhKeyPress(Sender: TObject; var Key: Char);
begin
if key=#13 then tclmc.SetFocus;
end;

procedure TFrmlld.tcldwKeyPress(Sender: TObject; var Key: Char);
begin
if key=#13 then tggxh.SetFocus;
end;

procedure TFrmlld.tbzKeyPress(Sender: TObject; var Key: Char);
begin
if key=#13 then tfb.SetFocus;
end;

function TFrmlld.check:boolean;
begin
  result:=true;
  if trim(tlldh.Text)='' then
    begin
    showmessage('编号不能为空!');
    result:=false;
    exit;
    end;
    if trim(tddh.Text)='' then
    begin
    showmessage('订单不存在,请您核对后输入!');
    result:=false;
    exit;
    end;
  if trim(tclmc.Text)='' then
   begin
    showmessage('请选择一个材料名称，如果没有出现在列表中，请添加!');
    result:=false;
    tclmc.SetFocus;
    exit;
    end;
 if trim(tclfl.Text)='' then
   begin
    showmessage('请选择一个材料分类，如果没有出现在列表中，请添加!');
    result:=false;
    tclfl.SetFocus;
    exit;
    end;
 if trim(tcldw.Text)='' then
   begin
    showmessage('请选择一个材料单位，如果没有出现在列表中，请添加!');
    result:=false;
    tcldw.SetFocus;
    exit;
    end;
  if trim(tsl.Text)='' then
   begin
    showmessage('请输入材料数量!');
    result:=false;
    tsl.SetFocus;
    exit;
    end;
  if trim(tdj.Text)='' then
   begin
    showmessage('请输入材料单价!');
    result:=false;
    tdj.SetFocus;
    exit;
    end;
  if trim(tje.Text)='' then
   begin
    showmessage('请输入材料金额!');
    result:=false;
    tje.SetFocus;
    exit;
    end;
  if trim(tfb.Text)='' then
   begin
    showmessage('请输入部门!');
    result:=false;
    tfb.SetFocus;
    exit;
    end;
    end;

function tFrmlld.khchange:boolean;
    var
    relation,cx:string;
    begin
    relation:=' = ''';
    cx:='';
    commandstring:='select * from dbo.llb';
    if trim(tddh.Text)<>'' then
    begin
    commandstring:=commandstring+' where (ddh'+relation+cx+trim(tddh.Text)+cx+''')'+' order by lldh desc';;
    DataModule1.ClientDataSet20.Close;
    DataModule1.ClientDataSet20.CommandText:=commandstring;
    DataModule1.ClientDataSet20.Open;
    end;
    end;


procedure TFrmlld.tclmcChange(Sender: TObject);
var
relation,cx:string;
begin
relation:=' like ''';
cx:='%';
commandstring:='select * from dbo.clmlb';
if trim(tclmc.Text)<>'' then
begin
commandstring:=commandstring+' where (clmc'+relation+cx+trim(tclmc.Text)+cx+''')'+' order by xh';;
DataModule1.ClientDataSet15.Close;
DataModule1.ClientDataSet15.CommandText:=commandstring;
DataModule1.ClientDataSet15.Open;
end;
if trim(tclmc.Text)='' then
begin
help.Caption:=' 请您输入或选择一个材料!';
exit;
end;
end;

procedure TFrmlld.tddhChange(Sender: TObject);
begin
khchange;
end;

function TFrmlld.save:boolean;
 begin
 try
 tlldh.Text:=trim(tlldh.Text);
 tddh.Text:=trim(tddh.Text);
 tclmc.Text:=trim(tclmc.Text);
 tclfl.Text:=trim(tclfl.Text);
 tcldw.Text:=trim(tcldw.Text);
 tggxh.Text:=trim(tggxh.Text);
 tys.Text:=trim(tys.Text);
 tsl.Text:=trim(tsl.Text);
 tdj.Text:=trim(tdj.Text);
 tje.Text:=trim(tje.Text);
 tbz.Text:=trim(tbz.Text);
 tfb.Text:=trim(tfb.Text);
 tfz.Text:=trim(tfz.Text);
 tllr.Text:=trim(tllr.Text);
 tflr.Text:=trim(tflr.Text);
 tzgr.Text:=trim(tzgr.Text);
 errcode:=true;
 errzt:=1;
if not DataModule1.ClientDataSet20.Locate('lldh',tlldh.Text,[]) then
   begin
 DataModule1.clientdataset20.Edit;
 DataModule1.ClientDataSet20.First;
 DataModule1.clientdataset20.Insert;
 DataModule1.clientdataset20.FieldByName('lldh').AsString:=tlldh.Text;
 DataModule1.clientdataset20.FieldByName('ddh').AsString:=tddh.Text;
 DataModule1.clientdataset20.FieldByName('rq').AsString:=formatdatetime('yyyy-mm-dd',rq.DateTime);
 DataModule1.clientdataset20.FieldByName('clmc').AsString:=tclmc.Text;
 DataModule1.clientdataset20.FieldByName('clfl').AsString:=tclfl.Text;
 DataModule1.clientdataset20.FieldByName('dw').AsString:=tcldw.Text;
 DataModule1.clientdataset20.FieldByName('ggxh').AsString:=tggxh.Text;
 DataModule1.clientdataset20.FieldByName('ys').AsString:=tys.Text;
 DataModule1.clientdataset20.FieldByName('sl').AsString:=tsl.Text;
 DataModule1.clientdataset20.FieldByName('dj').AsString:=tdj.Text;
 DataModule1.clientdataset20.FieldByName('je').AsString:=tje.Text;
 DataModule1.clientdataset20.FieldByName('bz').AsString:=tbz.Text;
 DataModule1.clientdataset20.FieldByName('fb').AsString:=tfb.Text;
 DataModule1.clientdataset20.FieldByName('fz').AsString:=tfz.Text;
 DataModule1.clientdataset20.FieldByName('llr').AsString:=tllr.Text;
 DataModule1.clientdataset20.FieldByName('flr').AsString:=tflr.Text;
 DataModule1.clientdataset20.FieldByName('zgr').AsString:=tzgr.Text;
 DataModule1.clientdataset20.FieldByName('czy').AsString:=trim(form1.StatusBar1.Panels[4].text);
 DataModule1.clientdataset20.ApplyUpdates(-1);
 end;
 errcode:=false;
 errzt:=0;
 except
  errcode:=true;
  errzt:=1;
  showmessage('数据库没有打开!');
  end;
end;

procedure TFrmlld.bcancelClick(Sender: TObject);
var
i,i1:integer;
begin
bsave.Enabled:=false;
bcancel.Enabled:=false;
bnew.Enabled:=false;
bprint.Enabled:=false;
 tlldh.Text:='';
 tddh.Text:='';
 tclmc.Text:='';
 tclfl.Text:='';
 tcldw.Text:='';
 tggxh.Text:='';
 tys.Text:='';
 tsl.Text:='';
 tdj.Text:='';
 tje.Text:='';
 tbz.Text:='';
 tfb.Text:='';
 tfz.Text:='';
 tllr.Text:='';
 tflr.Text:='';
 tzgr.Text:='';
help.Caption:='  要记录请点击〈新增〉按钮!';
dbgrid1.Enabled:=true;
end;

procedure TFrmlld.bprintClick(Sender: TObject);
begin
help.Caption:='   暂不提供打印功能!';
end;

procedure TFrmlld.breturnClick(Sender: TObject);
begin
try
rzcsj:=datetimetostr(now);
form16.WriteTorz(rzczy,rzsj,rzjsj,rzcsj);
DataModule1.ClientDataSet17.IndexFieldNames:='';
if DataModule1.clientdataset17.Active then  DataModule1.ClientDataSet17.Active:=false;
DataModule1.ClientDataSet20.IndexFieldNames:='';
if DataModule1.clientdataset20.Active then  DataModule1.ClientDataSet20.Active:=false;
if DataModule1.clientdataset18.Active then  DataModule1.ClientDataSet18.Active:=false;
if DataModule1.clientdataset3.Active then  DataModule1.ClientDataSet3.Active:=false;
if DataModule1.clientdataset15.Active then  DataModule1.ClientDataSet15.Active:=false;
if DataModule1.clientdataset24.Active then  DataModule1.ClientDataSet24.Active:=false;
except
showmessage('数据库没有打开!');
end;
close;
end;

procedure TFrmlld.DBGrid4DblClick(Sender: TObject);
begin
if not DataModule1.ClientDataSet15.Active then exit;
if DataModule1.ClientDataSet15.RecordCount>0 then
begin
tclmc.Text:=DataModule1.ClientDataSet15.FieldByName('clmc').AsString;
tclfl.Text:=DataModule1.ClientDataSet15.FieldByName('clfl').AsString;
tcldw.text:=DataModule1.ClientDataSet15.FieldByName('cldw').AsString;
tggxh.SetFocus;
end;
end;

procedure TFrmlld.DBGrid1TitleClick(Column: TColumn);
var i : integer;
begin
for i:= 1 to DBGrid1.Columns.Count do
begin
//恢复所有标题字体为默认
DBGrid1.Columns[i-1].Title.Font.Color := clBlue;
DBGrid1.Columns[i-1].Title.Font.Style := [];
end;
if DataModule1.ClientDataSet17.IndexFieldNames<>(Column.FieldName) then //判断原排序方式
begin
DataModule1.ClientDataSet17.IndexFieldNames:= Column.FieldName;
Column.Title.Font.Color := clRed; //改变标题行字体为红色，表示当前的排序方式为升序
Column.Title.Font.Style := [fsBold];
end;
end;

procedure TFrmlld.tslChange(Sender: TObject);
var
zhrmb:string;
begin
if trim(tje.Text)='' then tje.Text:='0';
if trim(tdj.Text)='' then tdj.Text:='0';
if (trim(tsl.Text)<>'') and (trim(tdj.Text)<>'') then
begin
tje.Text:=formatfloat('0.00',strtofloat(tsl.Text)*strtofloat(tdj.Text));
end;
end;

procedure TFrmlld.bsaveClick(Sender: TObject);
var
datestr:string;
begin
if not bsave.Enabled then exit;
bsave.Enabled:=false;
bcancel.Enabled:=false;
errcode:=true;
errzt:=1;
if not check then
begin
bsave.Enabled:=true;
bcancel.Enabled:=true;
 exit;
 end;
datestr:=frmxtfz.checkfzrq(formatdatetime('yyyy-mm-dd',rq.date));
if datestr<>'' then
begin
help.Caption:='  封账日期为'+datestr+'您不能添加封账日期前的数据';
exit;
end;
form1.clmc:=trim(tclmc.Text);
form1.clfl:=trim(tclfl.Text);
form1.cldw:=trim(tcldw.Text);
frmclml.checkcl(form1.clmc,form1.clfl,form1.cldw);
if form1.clmc='' then
begin
bsave.Enabled:=true;
bcancel.Enabled:=true;
tclmc.SetFocus;
help.Caption:='  该材料不存在,请您输入正确的材料名称!';
 exit;
 end;
form1.clmc:='';
form1.clfl:='';
form1.cldw:='';
form1.yg:=trim(tllr.Text);
form1.fb:=trim(tfb.Text);
form1.fz:=trim(tfz.Text);
frmyg.checkll(form1.yg,form1.fb,form1.fz);
if form1.yg='' then
begin
bsave.Enabled:=true;
bcancel.Enabled:=true;
tllr.SetFocus;
help.Caption:='  该员工不存在,请您输入正确的员工!';
 exit;
 end;
form1.yg:='';
form1.fb:='';
form1.fz:='';
try
form1.dorandombh;
DataModule1.clientdataset11.Refresh;
DataModule1.ClientDataSet11.First;
tlldh.Text:=floattostr(DataModule1.clientdataset11.FieldByName('lldh').AsFloat)+form1.randombh+form1.tbh.Text;
DataModule1.ClientDataSet11.Edit;
DataModule1.ClientDataSet11.FieldByName('lldh').AsFloat:= DataModule1.ClientDataSet11.FieldByName('lldh').AsFloat+1;
DataModule1.ClientDataSet11.ApplyUpdates(-1);
if DataModule1.ClientDataSet20.Locate('lldh',tlldh.Text,[]) then
begin
showmessage('该编号已经存在,请您重新输入!');
bsave.Enabled:=false;
bcancel.Enabled:=true;
bnew.Enabled:=true;
exit;
end;
save;
if errcode or (errzt<>0) then save;
if errcode or (errzt<>0) then save;
if errcode or (errzt<>0) then save;
if errcode or (errzt<>0) then
begin
showmessage('   数据库在保存主记录时失败,请您稍后重新保存!');
errdelete;
bsave.Enabled:=true;
bcancel.Enabled:=true;
exit;
end;
help.Caption:='   记录领料操作成功!' ;
 tlldh.Text:='';
 tddh.Text:='';