hw_er61509.c

瑞星微公司RK27XX系列芯片的SDK开发包

/******************************************************************/
/*   Copyright (C) 2007 ROCK-CHIPS FUZHOU . All Rights Reserved.  */
/*******************************************************************
File :  hw_Er61509.c
Desc :  Mcupanel型号的Mcu驱动

Author :  nzy
Date :
Notes :

$Log :
*********************************************************************/

#include "hw_include.h"
#include "hwapi_Mcupanel.h"


#if((LCDPANEL == MCUIF_ER61509_16B)||(LCDPANEL == MCUIF_ER61509_18B))

/*---------------------------------------------------------
Name  :  Er61509_PowerOnInit
Desc  :  初始化Mcu panel
Return:  状态
Author:  LingZJ
Date  :  070630
-----------------------------------------------------------*/
void Er61509_PowerOnInit(void)
{
    int i, j;
    Mcupanel_RegSet(0x0600, 0x0001);//soft reset
    delay_nops(10000);
    Mcupanel_RegSet(0x0600, 0x0000);//soft reset
    delay_nops(10000);
    Mcupanel_RegSet(0x0606, 0x0000);//i80-i/F Endian Control
    //===User setting===
    Mcupanel_RegSet(0x0001, 0x0000);//Driver Output Control
    Mcupanel_RegSet(0x0002, 0x0100);//LCD Driving Wave Control
//    Mcupanel_RegSet(0x0006,0x0000);//Outline Sharpening Control
    Mcupanel_RegSet(0x0003, 0x1038);//Entry Mode
    Mcupanel_RegSet(0x0008, 0x0808);//Sets the number of lines for front/back porch period
    Mcupanel_RegSet(0x0009, 0x0001);//Display Control 3
    Mcupanel_RegSet(0x000B, 0x0010);//Low Power Control
    Mcupanel_RegSet(0x000C, 0x0000);//External Display Interface Control 1
    Mcupanel_RegSet(0x000F, 0x0000);//External Display Interface Control 2
    Mcupanel_RegSet(0x0400, 0x3100);//Base Image Number of Line
    Mcupanel_RegSet(0x0401, 0x0001);//Base Image Display
    Mcupanel_RegSet(0x0404, 0x0000);//Base Image Vertical Scroll Control
    Mcupanel_RegSet(0x0500, 0x0000);//Partial Image 1: Display Position
    Mcupanel_RegSet(0x0501, 0x0000);//RAM Address (Start Line Address)
    Mcupanel_RegSet(0x0502, 0x018f);//RAM Address (End Line Address)
    Mcupanel_RegSet(0x0503, 0x0000);//Partial Image 2: Display Position  RAM Address
    Mcupanel_RegSet(0x0504, 0x0000);//RAM Address (Start Line Address)
    Mcupanel_RegSet(0x0505, 0x0000);//RAM Address (End Line Address)
    //Panel interface control===
    Mcupanel_RegSet(0x0010, 0x0013);//Division Ratio,Clocks per Line  14
    delay_nops(10000);
    Mcupanel_RegSet(0x0011, 0x0202);//Division Ratio,Clocks per Line
    Mcupanel_RegSet(0x0012, 0x0300);//Sets low power VCOM drive period.
    delay_nops(10000);
    Mcupanel_RegSet(0x0020, 0x021e);//Panel Interface Control 4
    Mcupanel_RegSet(0x0021, 0x0202);//Panel Interface Control 5
    Mcupanel_RegSet(0x0022, 0x0100);//Panel Interface Control 6
    Mcupanel_RegSet(0x0090, 0x0000);//Frame Marker Control
    Mcupanel_RegSet(0x0092, 0x0000);//MDDI Sub-display Control
    //===Gamma setting===
    Mcupanel_RegSet(0x0300, 0x0700);//γ Control
    Mcupanel_RegSet(0x0301, 0x0007);//γ Control
    Mcupanel_RegSet(0x0302, 0x0304);//γ Control
    Mcupanel_RegSet(0x0303, 0x0300);//γ Control
    Mcupanel_RegSet(0x0304, 0x0102);//γ Control
    Mcupanel_RegSet(0x0305, 0x0707);//γ Control
    Mcupanel_RegSet(0x0306, 0x1f1f);//γ Control
    Mcupanel_RegSet(0x0307, 0x0707);//γ Control
    Mcupanel_RegSet(0x0308, 0x0004);//γ Control
    Mcupanel_RegSet(0x0309, 0x0700);//γ Control
    Mcupanel_RegSet(0x030A, 0x0300);//γ Control
    Mcupanel_RegSet(0x030B, 0x0300);//γ Control
    Mcupanel_RegSet(0x030C, 0x0407);//γ Control
    Mcupanel_RegSet(0x030D, 0x101f);//γ Control
    //===Power on sequence===
    Mcupanel_RegSet(0x0007, 0x0001);//Display Control 1
    Mcupanel_RegSet(0x0110, 0x0001);//Power supply startup enable bit
    Mcupanel_RegSet(0x0112, 0x0060);//Power Control 7
    delay_nops(50000);
    Mcupanel_RegSet(0x0100, 0x13B0);//Power Control 1
    delay_nops(10000);
    Mcupanel_RegSet(0x0101, 0x0007);//Power Control 2
    delay_nops(10000);
    Mcupanel_RegSet(0x0102, 0x0119);//Starts VLOUT3,Sets the VREG1OUT.
    delay_nops(10000);
    Mcupanel_RegSet(0x0103, 0x0900);//set the amplitude of VCOM
    delay_nops(50000);
    Mcupanel_RegSet(0x0282, 0x0000);//VCOMH voltage
    delay_nops(10000);
    Mcupanel_RegSet(0x0281, 0x0000);//Selects the factor of VREG1OUT to generate VCOMH.
    Mcupanel_RegSet(0x0102, 0x01ba);//Starts VLOUT3,Sets the VREG1OUT.
    delay_nops(10000);
    //Address
    Mcupanel_RegSet(0x0210, 0x0000);//Window Horizontal RAM Address Start
    Mcupanel_RegSet(0x0211, 0x00ef);//Window Horizontal RAM Address End
    Mcupanel_RegSet(0x0212, 0x0000);//Window Vertical RAM Address Start
    Mcupanel_RegSet(0x0213, 0x018f);//Window Vertical RAM Address End
    Mcupanel_RegSet(0x0200, 0x0000);//RAM Address Set (Horizontal Address)
    Mcupanel_RegSet(0x0201, 0x0000);//RAM Address Set (Vertical Address)
    //===Display_On_Function===
    Mcupanel_RegSet(0x0007, 0x0021);//Display Control 1
    delay_nops(40000);
    Mcupanel_RegSet(0x0007, 0x0061);//Display Control 1
    delay_nops(100000);
    Mcupanel_RegSet(0x0007, 0x0173);//Display Control 1
    delay_nops(300000);
    Mcupanel_Command(0x0202);                  //Write Data to GRAM
#if 0
    for (j = 0;j < 240;j++)
        for (i = 0;i < 320;i++)
            Mcupanel_Data(0x0000ff);
#endif
}


/*---------------------------------------------------------
Name  :  Er61509_Standby
Desc  :
Return:
Author:  nzy
Date  :
-----------------------------------------------------------*/
void  Er61509_Standby(MCULCDSTATUS Enable)
{
    if (Enable == MCU_STANDBY)//Standby mode
    {

    }
    else//Return normal
    {

    }
}


/*---------------------------------------------------------
Name  :  Er61509_ScanDirSet
Desc  :  Mcupanel扫描方向设置
Params:  XSize -> X方向的宽度
         YSize -> Y方向的高度
Return:
Author:  nzy
Date  :
-----------------------------------------------------------*/
void Er61509_ScanDirSet(UINT16 XSize, UINT16 YSize)
{


}

#endif