hal.h

TI DSP的网络开发包NDK样本工程,可用与学习嵌入式的TCP/IP学习和应用.

//--------------------------------------------------------------------------
// HAL
//--------------------------------------------------------------------------
// HAL.H
//
// Include file for generic support layer
//
// Author: Michael A. Denio
// Copyright 1999, 2001 by Texas Instruments Inc.
//-------------------------------------------------------------------------

#ifndef _C_HAL_INC
#define _C_HAL_INC  /* #defined if this .h file has been included */

//
// Note: All functions define here with a leading underscore '_'
//       must only be called from outside of kernel mode (llEnter/llExit)
//
//

//-----------------------------------------------------------------------
//---[ LLPACKET ]--------------------------------------------------------
//-----------------------------------------------------------------------

// Packet Driver Interface to the Operating System
_extern uint   _llPacketInit(STKEVENT_Handle h); // Init and enumerate
_extern void   _llPacketShutdown();              // System shutdown
_extern void   _llPacketServiceCheck( uint fTimerTick ); // Polling Function

// Packet Driver Interface to the Stack
_extern uint   llPacketOpen( uint dev, HANDLE hEther );
_extern void   llPacketClose( uint dev );
_extern void   llPacketSend( uint dev, PBM_Handle hPkt );
_extern void   llPacketSetRxFilter( uint dev, uint filter );
_extern void   llPacketGetMacAddr( uint dev, UINT8 *pbData );
_extern uint   llPacketGetMCastMax( uint dev );
_extern void   llPacketSetMCast( uint dev, uint addrcnt, UINT8 *bAddr );
_extern uint   llPacketGetMCast( uint dev, uint maxaddr, UINT8 *bAddr );
_extern void   llPacketService();


//-----------------------------------------------------------------------
//---[ LLSERIAL ]--------------------------------------------------------
//-----------------------------------------------------------------------

// Serial Driver Interface called from User Mode
_extern uint  _llSerialInit(STKEVENT_Handle h); // Init and enumerate
_extern void  _llSerialShutdown();              // System shutdown
_extern void  _llSerialServiceCheck(uint fTimerTick); // Polling Function
_extern uint  _llSerialSend(uint dev, UINT8 *pBuf, uint len);

// Serial Driver Interface called from Kernel Mode
_extern uint  llSerialOpen(uint dev, void (*cbInput)(char c));
_extern void  llSerialClose( uint dev );

_extern uint  llSerialOpenHDLC( uint dev, HANDLE hHDLC,
                                void (*cbTimer)(HANDLE h),
                                void (*cbInput)(PBM_Handle hPkt) );
_extern void  llSerialCloseHDLC( uint dev );
_extern void  llSerialSendPkt( uint dev, PBM_Handle hPkt );
_extern void  llSerialHDLCPeerMap( uint dev, UINT32 peerMap );

_extern void  llSerialService();
_extern void  llSerialConfig( uint dev, uint baud, uint mode, uint flowctrl );

// Mode values for llSerialConfig()
#define HAL_SERIAL_MODE_8N1             0
#define HAL_SERIAL_MODE_7E1             1
#define HAL_SERIAL_FLOWCTRL_NONE        0
#define HAL_SERIAL_FLOWCTRL_HARDWARE    1


//-----------------------------------------------------------------------
//---[ LLTIMER ]---------------------------------------------------------
//-----------------------------------------------------------------------

// Timer Driver Interface to the Operating System
_extern void   _llTimerInit( STKEVENT_Handle h, UINT32 ctime );
_extern void   _llTimerShutdown();

// Timer Driver Interface to the Stack
_extern UINT32 llTimerGetTime( UINT32 *pMSFrac );
_extern UINT32 llTimerGetStartTime();



//-----------------------------------------------------------------------
//---[ LLUSERLED ]-----------------------------------------------------------
//-----------------------------------------------------------------------

// User LED Driver Interface to the Operating System
_extern void   _llUserLedInit();
_extern void   _llUserLedShutdown();

//-----------------------------------------------------------------------
//--  FOR 6711 DSK ONLY  ------------------------------------------------
//-----------------------------------------------------------------------
#ifdef DSK6711
extern uint llLedBits;
#define USER_LED_INIT 7
#define DSK_IOPORT  ((unsigned char *)0x90080003)
#define USER_LED1   1
#define USER_LED2   2
#define USER_LED3   4
#define USER_LED4   0
#define LED_ON(b)       llLedBits &= ~b; *DSK_IOPORT = llLedBits
#define LED_OFF(b)      llLedBits |= b; *DSK_IOPORT = llLedBits
#define LED_TOGGLE(b)   llLedBits ^= b; *DSK_IOPORT = llLedBits
#endif

//-----------------------------------------------------------------------
//---  FOR 6416 TEB ONLY  -----------------------------------------------
//-----------------------------------------------------------------------
#ifdef TEB6416
extern uint llLedBits;
#define USER_LED_INIT 0
#define DSK_IOPORT  ((unsigned char *)0x60000000)
#define USER_LED1   1
#define USER_LED2   2
#define USER_LED3   4
#define USER_LED4   8
#define LED_OFF(b)      llLedBits &= ~b; *DSK_IOPORT = llLedBits
#define LED_ON(b)       llLedBits |= b; *DSK_IOPORT = llLedBits
#define LED_TOGGLE(b)   llLedBits ^= b; *DSK_IOPORT = llLedBits
#endif

//-----------------------------------------------------------------------
//---  FOR 6416 DSK ONLY  -----------------------------------------------
//-----------------------------------------------------------------------
#ifdef DSK6416
extern uint llLedBits;
#define USER_LED_INIT 0
#define DSK_IOPORT  ((unsigned char *)0x60000000)
#define USER_LED1   1
#define USER_LED2   2
#define USER_LED3   4
#define USER_LED4   8
#define LED_OFF(b)      llLedBits &= ~b; *DSK_IOPORT = llLedBits
#define LED_ON(b)       llLedBits |= b; *DSK_IOPORT = llLedBits
#define LED_TOGGLE(b)   llLedBits ^= b; *DSK_IOPORT = llLedBits
#endif

//-----------------------------------------------------------------------
//---  FOR DM642 EVM ONLY  -----------------------------------------------
//-----------------------------------------------------------------------
// For EVM we assume the initialization is done in the BSL.
#ifdef EVMDM642
#define DSK_IOPORT  ((unsigned char *)0x90080017)
#define USER_LED1   1
#define USER_LED2   2
#define USER_LED3   4
#define USER_LED4   8
#define USER_LED5   16
#define USER_LED6   32
#define USER_LED7   64
#define USER_LED8   128
#define LED_ON(b)       *DSK_IOPORT &= ~b
#define LED_FF(b)       *DSK_IOPORT |= b
#define LED_TOGGLE(b)   *DSK_IOPORT ^= b
#endif


#endif