📄 lcd.c

📁 128*64点阵的LCD LCD控制器 KS0107 开发平台 Luminary 的 LM3S8962 ,开发软件IAR 4.42. 该程序包括对LCD显示全角汉字,半角英文,滚动显示等功能.
💻 C
📖 第 1 页 / 共 2 页
字号:
上一页 12
      }
    }
    else	
    {
      xs = ucRow;
      for (ys=0;ys<length;ys++)
      {
        ucRow = xs + ys;
        Point();
      }
    }
}

/************************** 在指定指点画点函数 ******************************************/

void Point(void)
{
    uchar x1,y1,x,y;
	
    x1=ucCol;
    y1=ucRow;
    ucRow=y1>>3;				//	取Y方向分页地址
    ucShowData=Rddata();
    y=y1&0x07;				      //	字节内位置计算
    x=0x01;
    x=x<<y;					//	移入所画点
    Wrdata(ucShowData|x);			//	画上屏幕
    ucCol=x1;					//	恢复xy坐标
    ucRow=y1;
}

/********************************* 屏幕滚动定位函数 ***********************************/

void Rollscreen(uchar Base)
{

    ucShowData = DISPFIRST|Base;		          // 定义显示起始行为x
    WrcmdL(ucShowData);                        
    WrcmdR(ucShowData);
}

/*************************************液晶屏显示初始化**************************************/

void LCD_Init(void)
{
    ucShowData = DISPOFF;				//	关闭显示屏
    WrcmdL(ucShowData);
    WrcmdR(ucShowData);
    ucShowData = DISPON;				//	打开显示屏
    WrcmdL(ucShowData);
    WrcmdR(ucShowData);
    ucShowData = DISPFIRST;			//	定义显示起始行为零
    WrcmdL(ucShowData);
    WrcmdR(ucShowData);
    LCD_Cls();                   //	清屏
    ucCol=0;					
    ucRow=0;
    Base=0;
    Locatexy();
}

/*************************************液晶屏管脚配置**************************************/

void LCD_PinConfig(void)
{
      SysCtlPeripheralEnable(LCD_DATA_PORT);                              /*  使能LCD数据接口              */
      SysCtlPeripheralEnable(LCD_CTL_PORT);                               /*  使能LCD控制接口              */  
    
      GPIOPadConfigSet(LCD_DATA_ADR, GPIO_ALL, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD);
                                                                        /*　设置LCD_DATA_PORT 为2MA，推挽输出      */
      GPIODirModeSet(LCD_DATA_ADR, GPIO_ALL, GPIO_DIR_MODE_IN);        /*  配置LED3为输出   */  
      
      GPIOPadConfigSet(LCD_CTL_ADR,LCD_RS_PIN,GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD);
      GPIODirModeSet(LCD_CTL_ADR,LCD_RS_PIN, GPIO_DIR_MODE_OUT);      /*　设置LCD_RS_PIN为2MA，上拉输出 */ 

      GPIOPadConfigSet(LCD_CTL_ADR,LCD_RW_PIN,GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD);
      GPIODirModeSet(LCD_CTL_ADR,LCD_RW_PIN, GPIO_DIR_MODE_OUT);   /*　设置LCD_RW_PIN为2MA，上拉输出      */

      GPIOPadConfigSet(LCD_CTL_ADR,LCD_E_PIN,GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD);
      GPIODirModeSet(LCD_CTL_ADR,LCD_E_PIN, GPIO_DIR_MODE_OUT);     /*　设置LCD_E_PIN为2MA，上拉输出      */

      GPIOPadConfigSet(LCD_CTL_ADR,CSA_PIN,GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD);
      GPIODirModeSet(LCD_CTL_ADR,CSA_PIN, GPIO_DIR_MODE_OUT);      /*　设置LCD_CSA_PIN为2MA，上拉输出      */ 
      
      GPIOPadConfigSet(LCD_CTL_ADR,CSB_PIN,GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD);
      GPIODirModeSet(LCD_CTL_ADR,CSB_PIN, GPIO_DIR_MODE_OUT);      /*　设置LCD_CSB_PIN为2MA，上拉输出      */   
}    

void BaseWrData(uchar ucDat)
{  
    GPIODirModeSet(LCD_DATA_ADR,GPIO_ALL,GPIO_DIR_MODE_OUT);           /*  配置LCD_DATA_PORT为输出    */ 
    GPIOPinWrite(LCD_DATA_ADR,GPIO_ALL,ucDat);
    GPIODirModeSet(LCD_DATA_ADR,GPIO_ALL,GPIO_DIR_MODE_IN);           /*  恢复LCD_DATA_PORT为输入    */
}
uchar BaseRdData()
{
    uchar ReDat;
    ReDat=(uchar)GPIOPinRead(LCD_DATA_ADR,GPIO_ALL);
    return ReDat;
}  
    
/*******************************************************************************************/

//     字符取模方式  :    纵向8点下高位，左到右，上到下 

/************************************定义中文字库***************************************/

const uchar _Chinese_1[]={

/*你   CC4E3 */
0x80,0x40,0xF0,0x2C,0x43,0x20,0x98,0x0F,0x0A,0xE8,0x08,0x88,0x28,0x1C,0x08,0x00,
0x00,0x00,0x7F,0x00,0x10,0x0C,0x03,0x21,0x40,0x3F,0x00,0x00,0x03,0x1C,0x08,0x00,

/*好   CBAC3 */
0x10,0x10,0xF0,0x1F,0x10,0xF0,0x80,0x82,0x82,0x82,0xF2,0x8A,0x86,0x82,0x80,0x00,
0x80,0x43,0x22,0x14,0x0C,0x73,0x20,0x00,0x40,0x80,0x7F,0x00,0x00,0x00,0x00,0x00,

/*世   CCAC0 */
0x20,0x20,0x20,0xFE,0x20,0x20,0xFE,0x20,0x20,0x20,0x20,0xFE,0x20,0x20,0x20,0x00,
0x00,0x00,0x00,0x3F,0x20,0x20,0x27,0x22,0x22,0x22,0x22,0x27,0x30,0x20,0x00,0x00,

/*界   CBDE7 */
0x00,0x00,0x00,0xFF,0x49,0x49,0x49,0xFF,0xC9,0x49,0x49,0x49,0xFF,0x00,0x00,0x00,
0x00,0x08,0x08,0x84,0x44,0x22,0x1D,0x00,0x00,0xFD,0x02,0x02,0x04,0x0C,0x04,0x00

};

const uchar _Chinese_2[]={

/*谢   CD0BB */
0x40,0x42,0xCC,0x04,0x00,0xFC,0x56,0x55,0xFC,0x50,0x90,0x10,0xFF,0x10,0x10,0x00,
0x00,0x00,0x3F,0x50,0x29,0x11,0x4D,0x83,0x7F,0x00,0x41,0x80,0x7F,0x00,0x00,0x00,

/*谢   CD0BB */
0x40,0x42,0xCC,0x04,0x00,0xFC,0x56,0x55,0xFC,0x50,0x90,0x10,0xFF,0x10,0x10,0x00,
0x00,0x00,0x3F,0x50,0x29,0x11,0x4D,0x83,0x7F,0x00,0x41,0x80,0x7F,0x00,0x00,0x00

};


/*******************************定义ASCII字库8列*16行********************************/

const uchar  _ASCII[]={

/*-文字:（space）--0x20*/
	 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:!--0x21*/
	 0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x27,0x00,0x00,0x00,0x00,
/*-文字:"--0x22*/
	 0x00,0x08,0x04,0x02,0x08,0x04,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:#--0x23*/
	 0x40,0x40,0xF8,0x40,0x40,0xF8,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,
/*-文字:$--0x24*/
	 0x00,0x70,0x88,0xFC,0x08,0x08,0x30,0x00,0x00,0x1C,0x20,0xFF,0x21,0x22,0x1C,0x00,
/*-文字:%--0x25*/
	 0xF0,0x08,0xF0,0x80,0x70,0x08,0x00,0x00,0x00,0x31,0x0E,0x01,0x1E,0x21,0x1E,0x00,
/*-文字:&--0x26*/
	 0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x18,0x16,0x20,0x00,
/*-文字:'--0x27*/
	 0x20,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:(--0x28*/
	 0x00,0x00,0x00,0x00,0xC0,0x30,0x08,0x04,0x00,0x00,0x00,0x00,0x03,0x0C,0x10,0x20,
/*-文字:)--0x29*/
	 0x04,0x08,0x30,0xC0,0x00,0x00,0x00,0x00,0x20,0x10,0x0C,0x03,0x00,0x00,0x00,0x00,
/*-文字:*--0x2a*/
	 0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,
/*-文字:+--0x2b*/
	 0x00,0x00,0x00,0xE0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x0F,0x01,0x01,0x01,0x00,
/*-文字:,--0x2c*/
	 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:---0x2d*/
	 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x00,
/*-文字:.--0x2e*/
	 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:/--ox2f*/
	 0x00,0x00,0x00,0x00,0x00,0xE0,0x18,0x04,0x00,0x40,0x30,0x0C,0x03,0x00,0x00,0x00,
/*-文字:0--0x30*/
	 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,
/*-文字:1--0x31*/
	 0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,
/*-文字:2--0x32*/
	 0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,
/*-文字:3--0x33*/
	 0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,
/*-文字:4--0x34*/
	 0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,
/*-文字:5--0x35*/
	 0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,
/*-文字:6--0x36*/
	 0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,
/*-文字:7--0x37*/
	 0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:8--0x38*/
	 0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,
/*-文字:9--0x39*/
	 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,
/*-文字::--*/
	 0x00,0x00,0x60,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,
/*-文字:/--*/
	 0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,
/*-文字:<--*/
	 0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,
/*-文字:=--*/
	 0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,
/*-文字:>--*/
	 0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,
/*-文字:?--*/
	 0x00,0x30,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x00,0x00,0x26,0x01,0x00,0x00,0x00,
/*-文字:@--*/
	 0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x28,0x27,0x28,0x07,0x00,
/*-文字:A--*/
	 0x00,0x00,0xE0,0x18,0x18,0xE0,0x00,0x00,0x30,0x0F,0x04,0x04,0x04,0x04,0x0F,0x30,
/*-文字:B--*/
	 0xF8,0x08,0x08,0x08,0x08,0x90,0x60,0x00,0x3F,0x21,0x21,0x21,0x21,0x12,0x0C,0x00,
/*-文字:C--*/
	 0xE0,0x10,0x08,0x08,0x08,0x10,0x60,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0C,0x00,
/*-文字:D--*/
	 0xF8,0x08,0x08,0x08,0x08,0x10,0xE0,0x00,0x3F,0x20,0x20,0x20,0x20,0x10,0x0F,0x00,
/*-文字:E--*/
	 0x00,0xF8,0x08,0x08,0x08,0x08,0x08,0x00,0x00,0x3F,0x21,0x21,0x21,0x21,0x20,0x00,
/*-文字:F--	*/
	 0xF8,0x08,0x08,0x08,0x08,0x08,0x08,0x00,0x3F,0x01,0x01,0x01,0x01,0x01,0x00,0x00,
/*-文字:G--*/
	 0xE0,0x10,0x08,0x08,0x08,0x10,0x60,0x00,0x0F,0x10,0x20,0x20,0x21,0x11,0x3F,0x00,
/*-文字:H--*/
	 0x00,0xF8,0x00,0x00,0x00,0x00,0xF8,0x00,0x00,0x3F,0x01,0x01,0x01,0x01,0x3F,0x00,
/*-文字:I--*/
	 0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:J--*/
	 0x00,0x00,0x00,0x00,0x00,0x00,0xF8,0x00,0x00,0x1C,0x20,0x20,0x20,0x20,0x1F,0x00,
/*-文字:K--*/
	 0x00,0xF8,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x3F,0x01,0x00,0x03,0x04,0x18,0x20,
/*-文字:L--*/
	 0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x20,0x20,0x20,0x20,0x20,0x20,0x00,
/*-文字:M--*/
	 0xF8,0xE0,0x00,0x00,0x00,0xE0,0xF8,0x00,0x3F,0x00,0x0F,0x30,0x0F,0x00,0x3F,0x00,
/*-文字:N--*/
	 0x00,0xF8,0x30,0xC0,0x00,0x00,0xF8,0x00,0x00,0x3F,0x00,0x01,0x06,0x18,0x3F,0x00,
/*-文字:O--*/
	 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,
/*-文字:P--	*/
	 0xF8,0x08,0x08,0x08,0x08,0x10,0xE0,0x00,0x3F,0x02,0x02,0x02,0x02,0x01,0x00,0x00,
/*-文字:Q--*/
	 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x2C,0x10,0x2F,0x00,
/*-文字:R--*/
	 0xF8,0x08,0x08,0x08,0x08,0x90,0x60,0x00,0x3F,0x01,0x01,0x01,0x07,0x18,0x20,0x00,
/*-文字:S--*/
	 0x60,0x90,0x88,0x08,0x08,0x10,0x20,0x00,0x0C,0x10,0x20,0x21,0x21,0x12,0x0C,0x00,
/*-文字:T--*/
	 0x08,0x08,0x08,0xF8,0x08,0x08,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:U--*/
	 0xF8,0x00,0x00,0x00,0x00,0x00,0xF8,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,
/*-文字:V--*/
	 0x18,0xE0,0x00,0x00,0x00,0xE0,0x18,0x00,0x00,0x01,0x0E,0x30,0x0E,0x01,0x00,0x00,
/*-文字:W--*/
	 0xF8,0x00,0xC0,0x38,0xC0,0x00,0xF8,0x00,0x03,0x3C,0x03,0x00,0x03,0x3C,0x03,0x00,
/*-文字:X--*/
	 0x08,0x30,0xC0,0x00,0xC0,0x30,0x08,0x00,0x20,0x18,0x06,0x01,0x06,0x18,0x20,0x00,
/*-文字:Y--*/
	 0x08,0x30,0xC0,0x00,0xC0,0x30,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:Z--*/
	 0x08,0x08,0x08,0x08,0xC8,0x28,0x18,0x00,0x30,0x2C,0x22,0x21,0x20,0x20,0x20,0x00,
/*-文字:{--*/
	 0x00,0x00,0x00,0x80,0x7E,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x20,0x00,0x00,
/*-文字:\--*/
	 0x00,0x08,0x70,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x0E,0x30,0xC0,0x00,
/*-文字:}--*/
	 0x00,0x02,0x7E,0x80,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x00,0x00,0x00,0x00,0x00,
/*-文字:^--*/
	 0x00,0x08,0x04,0x02,0x02,0x04,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:_--*/
	 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
/*-文字:`--*/
	 0x00,0x00,0x02,0x06,0x04,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:a--*/
	 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x24,0x24,0x14,0x3F,0x00,
/*-文字:b--*/
	 0x00,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x20,0x1F,0x00,
/*-文字:c--*/
	 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x20,0x11,0x00,
/*-文字:d--*/
	 0x00,0x00,0x80,0x80,0x80,0x00,0xF8,0x00,0x00,0x1F,0x20,0x20,0x20,0x11,0x3F,0x00,
/*-文字:e--*/
	 0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x15,0x24,0x24,0x24,0x25,0x16,0x00,
/*-文字:f--*/
	 0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:g--*/
	 0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x40,0xB7,0xA8,0xA8,0xA8,0xA7,0x40,0x00,
/*-文字:h--*/
	 0x00,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x3F,0x01,0x00,0x00,0x00,0x3F,0x00,
/*-文字:i--*/
	 0x00,0x00,0x00,0x98,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:j--*/
	 0x00,0x00,0x00,0x00,0x98,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,
/*-文字:k--*/
	 0x00,0xF8,0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x3F,0x04,0x02,0x0D,0x10,0x20,0x00,
/*-文字:l--*/
	 0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:m--*/
	 0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x3F,0x00,0x00,0x3F,0x00,0x00,0x3F,0x00,
/*-文字:n--*/
	 0x00,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x3F,0x01,0x00,0x00,0x00,0x3F,0x00,
/*-文字:o--*/
	 0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x0E,0x00,
/*-文字:p--*/
	 0x00,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0xFF,0x11,0x20,0x20,0x20,0x1F,0x00,
/*-文字:q--*/
	 0x00,0x00,0x80,0x80,0x80,0x00,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x11,0xFF,0x00,
/*-文字:r--*/
	 0x00,0x00,0x80,0x00,0x00,0x80,0x80,0x00,0x00,0x00,0x3F,0x01,0x01,0x00,0x00,0x00,
/*-文字:s--*/
	 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x13,0x24,0x24,0x24,0x24,0x19,0x00,
/*-文字:t--*/
	 0x00,0x80,0x80,0xE0,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x00,
/*-文字:u--*/
	 0x00,0x80,0x00,0x00,0x00,0x00,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x00,
/*-文字:v--*/
	 0x80,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x00,0x07,0x18,0x20,0x18,0x07,0x00,0x00,
/*-文字:w--*/
	 0x80,0x00,0x00,0x80,0x00,0x00,0x80,0x00,0x0F,0x30,0x0E,0x01,0x0E,0x30,0x0F,0x00,
/*-文字:x--*/
	 0x80,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x20,0x11,0x0A,0x04,0x0A,0x11,0x20,0x00,
/*-文字:y--*/
	 0x80,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x00,0x87,0x98,0x60,0x18,0x07,0x00,0x00,
/*-文字:z--*/
	 0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x20,0x00,
/*-文字:{--*/
	 0x00,0x00,0x00,0x80,0x7E,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x20,0x00,0x00,
/*-文字:|--*/
	 0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,
/*-文字:}--*/
	 0x00,0x02,0x7E,0x80,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x00,0x00,0x00,0x00,0x00,
/*-文字:~--*/
	 0x00,0x06,0x01,0x01,0x06,0x04,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
};
上一页 12
💿 文件大小 19 K
👤 上传用户 wanghaihah
📂 所属分类单片机开发
🏷️ 相关标签

#LCD #Luminary #S8962 #0107
⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -