desktop.mns

本原代码集合了树形控件

ID_DrawordeA     [Move &Above Object]^C^C^P(ai_draworder "_a") ^P
ID_DrawordeU     [<-Move &Under Object]^C^C^P(ai_draworder "_u") ^P
ID_Inquiry     [->In&quiry]
ID_List          [&List]^C^C_list 
                 [--]
ID_ID            [&ID Point]^C^C_id 
ID_Dist          [&Distance]^C^C_dist 
ID_Area          [&Area]^C^C_area 
ID_Massprop      [<-&Mass Properties]^C^C_massprop 
               [--]
ID_Preferenc   [&Preferences...]^C^C_preferences 
ID_MPreferenc  [Des&ktop Preferences...]^C^Cmnu_desktop_prefs 

***POP5
ID_Design      [&Design]
ID_Line        [&Line]^C^C_line 
ID_Xline       [Cons&truction Line]^C^C_xline 
ID_Ray         [&Ray]^C^C_ray 
ID_Pline       [&Polyline]^C^C_pline 
ID_3dpoly      [&3D Polyline]^C^C_3dpoly 
ID_Spline      [&Spline]^C^C_spline 
               [--]
ID_Arc         [->&Arc]
ID_Arc3point     [3 &Points]^C^C_arc 
                 [--]
ID_ArcStCeEn     [&Start, Center, End]^C^C_arc \_c 
ID_ArcStCeAn     [S&tart, Center, Angle]^C^C_arc \_c \_a 
ID_ArcStCeLe     [St&art, Center, Length]^C^C_arc \_c \_l 
                 [--]
ID_ArcStEnAg     [Start, E&nd, Angle]^C^C_arc \_e \_a 
ID_ArcStEnDi     [Start, End, &Direction]^C^C_arc \_e \_d 
ID_ArcStEnRa     [Start, End, &Radius]^C^C_arc \_e \_r 
                 [--]
ID_ArcCeStEn     [&Center, Start, End]^C^C_arc _c 
ID_ArcCeStAn     [C&enter, Start, Angle]^C^C_arc _c \\_a 
ID_ArcCeStLe     [Center, Start, &Length]^C^C_arc _c \\_l 
                 [--]
ID_ArcContin     [<-C&ontinue]^C^C_arc ;
ID_MnCircle    [->&Circle]
ID_CircleRad     [Center, &Radius]^C^C_circle 
ID_CircleDia     [Center, &Diameter]^C^C_circle \_d 
                 [--]
ID_Circle2pt     [&2 Points]^C^C_circle _2p 
ID_Circle3pt     [&3 Points]^C^C_circle _3p 
                 [--]
ID_CircleTTR     [&Tan, Tan, Radius]^C^C_circle _ttr 
ID_CircleTTT     [<-T&an, Tan, Tan]^C^C_circle _3p _tan \_tan \_tan \
ID_MnEllipse   [->&Ellipse]
ID_EllipseCe     [&Center]^C^C_ellipse _c 
ID_EllipseAx     [Axis, &End]^C^C_ellipse 
                 [--]
ID_EllipseAr     [<-&Arc]^C^C_ellipse _a 
               [--]
ID_Polygon     [Pol&ygon]^C^C_polygon 
ID_Rectang     [Rectan&gle]^C^C_rectang 
ID_Point       [->P&oint]
ID_PointSing     [&Single Point]^C^C_point 
ID_PointMult     [<-&Multiple Point]*^C^C_point 
               [--]
ID_Solids      [->Sol&ids]
                 [->&Box]
ID_Boxcen          [C&enter]^C^C_box _ce 
ID_Boxcor          [<-C&orner]^C^C_box 
ID_Sphere        [&Sphere]^C^C_sphere 
                 [->&Cylinder]
ID_Cylell          [Ell&iptical]^C^C_cylinder _e 
ID_Cylcen          [<-C&enter]^C^C_cylinder 
                 [->C&one]
ID_Conell          [Ell&iptical]^C^C_cone _e 
ID_Concen          [<-C&enter]^C^C_cone 
                 [->&Wedge]
ID_Wedcen          [C&enter]^C^C_wedge _ce 
ID_Wedcor          [<-C&orner]^C^C_wedge 
ID_Torus         [&Torus]^C^C_torus 
                 [--]
ID_Extrude       [E&xtrude]^C^C_extrude 
ID_Revolve       [Re&volve]^C^C_revolve 
                 [--]
ID_Slice         [S&lice]^C^C_slice 
ID_Section       [S&ection]^C^C_section 
ID_Interfere     [<-Inter&ference]^C^C_interfere 
               [--]
ID_Bhatch      [&Hatch...]^C^C_bhatch 

***POP6
ID_Dim         [&Construct]
ID_Copy        [Cop&y]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_copy,^C^C_copy) 
ID_Offset      [Off&set]^C^C_offset 
ID_Mirror      [M&irror]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_mirror,^C^C_mirror) 
               [->&Array]
ID_Arrrec        [&Rectangular]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),^C^C_array;_r,^C^C_select;\_array;_p;;_r) 
ID_Arrpol        [<-&Polar]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),^C^C_array;_p,^C^C_select;\_array;_p;;_p) 
               [--]
ID_Trans3D     [->&3D Translations]
ID_3darray       [3D &Array]^C^C_3darray 
ID_Mirror3d      [3D &Mirror]^C^C_mirror3d 
ID_Rotate3d      [<-3D &Rotate]^C^C_rotate3d 
               [--]
ID_Move        [Mo&ve]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_move,^C^C_move) 
ID_Rotate      [&Rotate]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_rotate,^C^C_rotate) 
ID_Align       [Alig&n]^C^C_align 
ID_Divide      [&Divide]^C^C_divide 
ID_Measure     [&Measure]^C^C_measure 
               [--]
ID_Bmake       [&Local Block...]^C^C_bmake 
ID_Wblock      [&File Block...]^C^C_wblock 
ID_Ddinsert    [Insert &Block...]^C^C_ddinsert 
ID_Group       [&Group...]^C^C_group 
               [--]
ID_Xref        [E&xternal Reference...]^C^C_xref 
               [--]
ID_Ddattdef    [D&efine Attributes...]^C^C_ddattdef 

***POP7
ID_Modify      [&Modify]
ID_Scale       [Sca&le]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_scale,^C^C_scale) 
ID_Stretch     [Stretc&h]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_stretch,^C^C_stretch) 
ID_Lengthen    [Len&gthen]^C^C_lengthen 
               [--]
ID_Trim        [&Trim]^C^C_trim 
ID_Extend      [Exten&d]^C^C_extend 
ID_Break       [Brea&k]^C^C_break 
               [--]
ID_Chamfer     [&Chamfer]^C^C_chamfer 
ID_Fillet      [&Fillet]^C^C_fillet 
               [--]
ID_Pedit       [Edit &Polyline]^C^C_pedit 
ID_Splinedit   [Edit &Spline]^C^C_splinedit 
ID_Hatchedit   [Ed&it Hatch]^C^C_hatchedit 
ID_DdAtte      [Edit &Attribute]^C^C_ddatte 
ID_Explode     [E&xplode]^C^C_explode 
               [--]
ID_Bools       [->&Boolean]
ID_Union         [&Union]^C^C_union 
ID_Subtract      [&Subtract]^C^C_subtract 
ID_Intersect     [<-&Intersect]^C^C_intersect 
               [--]
ID_Erase       [&Erase]^C^C_erase 
ID_Oops        [&Oops]^C^C_oops 

***POP8
               [&Surface]
               [-> &Create Surface]
ID_ExtrudeSurf   [&Extrude]^C^C_amextrudesf;
ID_RevolveSurf   [&Revolve]^C^C_amrevolvesf;
ID_SweepSurf     [&Sweep]^C^C_amsweepsf;
ID_TubeSurf      [&Tubular]^C^C_amtube;
                 [--]
ID_LoftUSurf     [Loft&U...]^C^C_amloftu;
ID_LoftUVSurf    [LoftU&V]^C^C_amloftuv;
ID_PlaneSurf     [&Planar]^C^C_amplane;
ID_PlaneTSurf    [Pla&nar Trim]^C^C_amplane;_wire;
ID_AmRuleSurf    [Ru&le]^C^C_amrule;
                 [--]
ID_BlendSurf     [&Blend]^C^C_amblend;
ID_CornerSurf    [&Corner Fillet]^C^C_amcorner;
ID_FilletSurf    [&Fillet...]^C^C_amfilletsf;
ID_OffsetSurf    [&Offset]^C^C_amoffsetsf;
                 [--]
ID_ConvertFace   [<-From &ACAD]^C^C_am2sf;
               [-> Create &Wireframe]
ID_AugLine       [&Augmented Lines]^C^C_amaugment;
ID_CopyEdge      [&Copy Edge]^C^C_amedge;_output;\_copy;
ID_FlowWire      [&Flow...]^C^C_amflow;
ID_InterWire     [&Intersect Wire...]^C^CAsIntrWire;
ID_PartLine      [Parting &Line]^C^C_ampartline;
ID_ProjWire      [&Project Wire...]^C^CAsProjWire;
ID_amSection     [&Section Cuts...]^C^C_amsection;
                 [--]
ID_OffsetWire    [<-&Offset Wire]^C^C_amoffset3d;
               [-> Create &Primitives]
ID_AmCone        [&Cone]^C^C_amprimsf;_cone;
ID_AmCylinder    [C&ylinder]^C^C_amprimsf;_cylinder;
ID_AmSphere      [&Sphere]^C^C_amprimsf;_sphere;
ID_AmTorus       [<-&Torus]^C^C_amprimsf;_torus;
               [--]
               [-> &Edit Surface]
ID_BreakSurf     [&Break]^C^C_ambreak;
ID_InterTrim     [&Intersect Trim...]^C^CAsIntrTrim;
ID_JoinSurf      [&Join]^C^C_amjoinsf;
ID_LengthSurf    [&Lengthen]^C^C_amlengthen;
ID_ProjTrim      [&Project Trim...]^C^CAsProjTrim;
ID_RefineSurf    [&Refine]^C^C_amrefinesf;
ID_Scalesrf      [&Scale]^C^C_amscale;
ID_TruncSurf     [&Truncate]^C^C_select;_auto \_-ameditsf;_previous;;$M=$(if,$(getvar,cmdactive),_truncate;_exit;)^Z
                 [--]
ID_EditAll       [&Overall Edit...]^C^C_ameditsf;
                 [--]
ID_GripSurf      [&Define Grips]^C^C_select;_auto \_-ameditsf;_previous;;$M=$(if,$(getvar,cmdactive),_preview;_yes;_u;\_v;\_exit;)^Z
ID_FlipSurf      [<-&Flip Normal]^C^C_select;_auto \_-ameditsf;_previous;;$M=$(if,$(getvar,cmdactive),_direction;_exit;)^Z
               [-> Edit Wire&frame]
ID_FilletWire    [&Fillet]^C^C_amfillet3d;
ID_JoinWire      [&Join...]^C^C_amjoin3d;
ID_RefineWire    [R&efine]^C^C_amrefine3d;
                 [--]
ID_DirWire       [D&irection]^C^C_amdirection;
                 [--]
ID_AugAdd        [&Augment Polyline]^C^C_ameditaug;_add;
ID_AugBlend      [&Blend Vectors]^C^C_ameditaug;_blend;
ID_AugCopy       [&Copy Vectors]^C^C_ameditaug;_copy;
ID_AugDel        [&Delete Vectors]^C^C_explode;
ID_AugRot        [&Rotate Vectors]^C^C_ameditaug;_rotate;
ID_AugTwist      [&Twist Vectors]^C^C_ameditaug;_twist;
ID_AugLen        [&Vector Length]^C^C_ameditaug;_normal;
                 [--]
ID_CreateSpln    [&Spline Fit...]^C^C_amfitspline;
ID_Unspln        [<-&Unspline]^C^C_amunspline;
               [-> Edit &Trim Edges]
ID_CopyEdge      [&Copy Edge]^C^C_amedge;_output;\_copy;
ID_ExtracLoop    [&Extract Loop]^C^C_amedge;_output;\_extract;
ID_ShowNodes     [&Show Nodes]^C^C_amedge;_show;
ID_DelTrims      [<-&Untrim Surface]^C^C_amedge;_untrim;
ID_Solcut      [ Edit &Solid]^C^C_amsolcut;
               [--]
ID_Dispsf      [ Surface &Display...]^C^C_amdispsf;
               [--]
ID_TbSurfac    [ &Launch Toolbar]^C^Cmnu_launch_toolbar;
               [-> &Utilities]
ID_CheckFit      [C&heck fit]^C^C_amcheckfit;
ID_surfprop      [&Mass Properties]^C^C_amsurfprop;
                 [--]
ID_Version       [<-&AutoSurf Version]^C^C_amsfver;
               [--]
ID_Vis         [ &Visibility...]^C^Cmnu_object_visibility;
ID_Prefer      [ P&references...]^C^Cmnu_surf_prefs 


***POP10
               [&总系统]
               [->&系统总体管理]
                 [&系统管理员登录]^C^C_hello
                 [&普通用户登录系统]^C^C_pjl
                 [<-&注册管理]^C^C_pji 
                 [--]
               [->&机械传动装置智能选型]
               [<-&智能选型]^C^C_hello1
               [--]
               [->&智能查询]
                 [&基于机构特性的查询]^C^C_ljb
                 [&基于机构功能的查询]^C^C_ljb1
                 [<-&基于输入输出运动方向的查询]^C^C_ljb2
               [--]
               [->&公差优化]
                 [&基于指定加工方法的公差优化]^C^C_sjc 
                 [<-&加工方法与公差的并行优化]^C^C_sun 
              

***POP17
**GRIPS