zdprofile.h

Zigbee2006入门（源代码+文档讲解+系统推荐）

 *  UInt64 DeviceAddress)
 */
#define ZDP_MgmtLeaveReq( dstAddr, IEEEAddr, SecurityEnable ) \
  ZDP_SendData( &ZDP_TransID, dstAddr, Mgmt_Leave_req, Z_EXTADDR_LEN, IEEEAddr, SecurityEnable)
#endif

#ifdef REMOVE_BY_LAF
/*
 * ZDP_NWKAddrRsp - Send a Network Address Response
 */
#define ZDP_NWKAddrRsp( TransSeq, dstAddr, Status, IEEEAddrRemoteDev, ReqType, nwkAddr, NumAssocDev, \
                 StartIndex, NWKAddrAssocDevList, SecurityEnable ) \
                          ZDP_AddrRsp( NWK_addr_rsp, TransSeq, dstAddr, Status, \
                                IEEEAddrRemoteDev, ReqType, nwkAddr, NumAssocDev, StartIndex, \
                                NWKAddrAssocDevList, SecurityEnable )

/*
 * ZDP_IEEEAddrRsp - Send an IEEE Address Response
 */
#define ZDP_IEEEAddrRsp( TransSeq, dstAddr, Status, IEEEAddrRemoteDev, ReqType, nwkAddr, NumAssocDev, \
                 StartIndex, NWKAddrAssocDevList, SecurityEnable ) \
                          ZDP_AddrRsp( IEEE_addr_rsp, TransSeq, dstAddr, Status, \
                                IEEEAddrRemoteDev, ReqType, nwkAddr, NumAssocDev, StartIndex, \
                                NWKAddrAssocDevList, SecurityEnable )
#endif
/*
 * ZDP_ActiveEPRsp - Send an list of active endpoint
 */
#define ZDP_ActiveEPRsp( TransSeq, dstAddr, Status, nwkAddr, Count, \
                  pEPList, SecurityEnable ) \
                      ZDP_EPRsp( Active_EP_rsp, TransSeq, dstAddr, Status, \
                           nwkAddr, Count, pEPList, SecurityEnable )

/*
 * ZDP_MatchDescRsp - Send an list of endpoint that match
 */
#define ZDP_MatchDescRsp( TransSeq, dstAddr, Status, nwkAddr, Count, \
                  pEPList, SecurityEnable ) \
                      ZDP_EPRsp( Match_Desc_rsp, TransSeq, dstAddr, Status, \
                           nwkAddr, Count, pEPList, SecurityEnable )

/*
 * ZDP_ComplexDescRsp - This message isn't supported until we fix it.
 */
#define ZDP_ComplexDescRsp( dstAddr, SecurityEnable ) \
        ZDP_GenericRsp( dstAddr, Complex_Desc_rsp, SecurityEnable )

/*
 * ZDP_UserDescConf - Send a User Descriptor Set Response
 */
#define ZDP_UserDescConf( TransSeq, dstAddr, Status, SecurityEnable ) \
            ZDP_SendData( &TransSeq, dstAddr, User_Desc_conf, 1, &Status, SecurityEnable )

/*
 * ZDP_EndDeviceBindRsp - Send a End Device Bind Response
 */
#define ZDP_EndDeviceBindRsp( TransSeq, dstAddr, Status, SecurityEnable ) \
       ZDP_SendData( &TransSeq, dstAddr, End_Device_Bind_rsp, 1, &Status, SecurityEnable )

/*
 * ZDP_BindRsp - Send a Bind Response
 */
#define ZDP_BindRsp( TransSeq, dstAddr, Status, SecurityEnable ) \
                  ZDP_SendData( &TransSeq, dstAddr, Bind_rsp, 1, &Status, SecurityEnable )

/*
 * ZDP_UnbindRsp - Send an Unbind Response
 */
#define ZDP_UnbindRsp( TransSeq, dstAddr, Status, SecurityEnable ) \
                ZDP_SendData( &TransSeq, dstAddr, Unbind_rsp, 1, &Status, SecurityEnable )

/*
 * ZDP_MgmtLeaveRsp - Send a Management Leave Response
 */
#define ZDP_MgmtLeaveRsp( TransSeq, dstAddr, Status, SecurityEnable ) \
            ZDP_SendData( &TransSeq, dstAddr, Mgmt_Leave_rsp, 1, &Status, SecurityEnable )

/*
 * ZDP_MgmtPermitJoinRsp - Send a Management Permit Join Response
 */
#define ZDP_MgmtPermitJoinRsp( TransSeq, dstAddr, Status, SecurityEnable ) \
      ZDP_SendData( &TransSeq, dstAddr, Mgmt_Permit_Join_rsp, 1, &Status, SecurityEnable )

/*
 * ZDP_MgmtDirectJoinRsp - Send a Mgmt_DirectJoining_Rsp Response
 */
#define ZDP_MgmtDirectJoinRsp( TransSeq, dstAddr, Status, SecurityEnable ) \
      ZDP_SendData( &TransSeq, dstAddr, Mgmt_Direct_Join_rsp, 1, &Status, SecurityEnable )

/*********************************************************************
 * FUNCTIONS - API
 */

/*
 * ZDP_NWKAddrOfInterestReq - Send request with NWKAddrOfInterest as parameter
 */
extern afStatus_t ZDP_NWKAddrOfInterestReq( zAddrType_t *dstAddr,
                              uint16 nwkAddr, byte cmd, byte SecurityEnable );
/*
 * ZDP_NwkAddrReq - Request a Network address
 *
 * @MT SPI_CMD_ZDO_NWK_ADDR_REQ
 * (UInt64 IEEEAddress,
 *  byte ReqType,
 *  byte StarIndex,
 *  byte SecurityEnable)
 *
 */
extern afStatus_t ZDP_NwkAddrReq( byte *IEEEAddress, byte ReqType,
                               byte StartIndex, byte SecurityEnable );

/*
 * ZDP_IEEEAddrReq - Request an IEEE address
 *
 * @MT SPI_CMD_ZDO_IEEE_ADDR_REQ
 * (UInt16 shortAddr,
 *  byte ReqType,
 *  byte StartIndex,
 *  byte SecurityEnable)
 *
 */
extern afStatus_t ZDP_IEEEAddrReq( uint16 shortAddr, byte ReqType,
                                byte StartIndex, byte SecurityEnable );

/*
 * ZDP_MatchDescReq - Request matching device's endpoint list
 *
 * @MT SPI_CMD_ZDO_MATCH_DESC_REQ
 * (UInt16 DstAddr,
 *  UInt16 NWKAddrOfInterest,
 *  UInt16 ProfileID,
 *  byte NumInClusters,
 *  uint16 InClusterList[15],
 *  byte NumOutClusters,
 *  uint16 OutClusterList[15],
 *  byte SecuritySuite)
 *
 */
extern afStatus_t ZDP_MatchDescReq( zAddrType_t *dstAddr, uint16 nwkAddr,
                                uint16 ProfileID,
                                byte NumInClusters, uint16 *InClusterList,
                                byte NumOutClusters, uint16 *OutClusterList,
                                byte SecurityEnable );

/*
 * ZDP_SimpleDescReq - Request Simple Descriptor
 *
 * @MT SPI_CMD_ZDO_SIMPLE_DESC_REQ
 * (UInt16 DstAddr,
 *  UInt16 NWKAddrOfInterest,
 *  byte Endpoint,
 *  byte Security)
 *
 */
extern afStatus_t ZDP_SimpleDescReq( zAddrType_t *dstAddr, uint16 nwkAddr,
                                    byte ep, byte SecurityEnable );

/*
 * ZDP_UserDescSet - Set the User Descriptor
 *
 * @MT SPI_CMD_ZDO_USER_DESC_SET
 * (UInt16 DstAddr,
 *  UInt16 NWKAddrOfInterest,
 *  byte DescLen,
 *  byte Descriptor[15],
 *  byte SecuritySuite)
 *
 */
extern afStatus_t ZDP_UserDescSet( zAddrType_t *dstAddr, uint16 nwkAddr,
                          UserDescriptorFormat_t *UserDescriptor,
                          byte SecurityEnable );

#if defined ( ZDO_SERVERDISC_REQUEST )
/*
 * ZDP_ServerDiscReq - Build and send a Server_Discovery_req request message.
 */
afStatus_t ZDP_ServerDiscReq( uint16 serverMask, byte SecurityEnable );
#endif

/*
 * ZDP_EndDeviceAnnce - End Device Announce
 *
 * @MT SPI_CMD_ZDO_END_DEV_ANNCE
 * (UInt16 DevAddr,
 *  byte DeviceAddress,
 *  byte SecuritySuite)
 *
 */
extern afStatus_t ZDP_EndDeviceAnnce( uint16 nwkAddr, byte *IEEEAddr,
                         byte capabilities, byte SecurityEnable );

/*
 * ZDP_EndDeviceBindReq - End Device (hand) bind request
 *
 * @MT SPI_CMD_ZDO_END_DEV_BIND_REQ
 * (UInt16 DstAddr,
 *  UInt16 LocalCoordinator,
 *  byte Endpoint,
 *  UInt16 Profile,
 *  byte NumInClusters,
 *  uint16 InClusterList[15],
 *  byte NumOutClusters,
 *  uint16 OutClusterList[15],
 *  byte SecuritySuite)
 *
 */
extern afStatus_t ZDP_EndDeviceBindReq( zAddrType_t *dstAddr,
                              uint16 LocalCoordinator,
                              byte ep,
                              uint16 ProfileID,
                              byte NumInClusters, uint16 *InClusterList,
                              byte NumOutClusters, uint16 *OutClusterList,
                              byte SecurityEnable );

/*
 * ZDP_BindUnbindReq - bind request
 */
extern afStatus_t ZDP_BindUnbindReq( uint16 BindOrUnbind, zAddrType_t *dstAddr,
                            byte *SourceAddr, byte SrcEP,
                            cId_t  ClusterID,
                            zAddrType_t *DestinationAddr, byte DstEP,
                            byte SecurityEnable );

/*
 * ZDP_MgmtNwkDiscReq - Send a Management Network Discovery Request
 *
 * @MT SPI_CMD_ZDO_MGMT_NWKDISC_REQ
 * (UInt16 DstAddr,
 *  UInt32 ScanChannels,
 *  byte StartIndex)
 *
 */
extern afStatus_t ZDP_MgmtNwkDiscReq( zAddrType_t *dstAddr,
                            uint32 ScanChannels,
                            byte ScanDuration,
                            byte StartIndex,
                            byte SecurityEnable );

/*
 * ZDP_MgmtDirectJoinReq - Send a Management Direct Join Request
 *
 * @MT SPI_CMD_ZDO_MGMT_DIRECT_JOIN_REQ
 * (UInt16 DstAddr,
 *  UInt64 DeviceAddress,
 *  byte CapInfo)
 *
 */
extern afStatus_t ZDP_MgmtDirectJoinReq( zAddrType_t *dstAddr,
                               byte *deviceAddr,
                               byte capInfo,
                               byte SecurityEnable );

/*
 * ZDP_MgmtPermitJoinReq - Send a Management Permit Join Request
 *
 * @MT SPI_CMD_ZDO_MGMT_PERMIT_JOIN_REQ
 * (UInt16 DstAddr,
 *  byte duration,
 *  byte TcSignificance)
 *
 */
extern afStatus_t ZDP_MgmtPermitJoinReq( zAddrType_t *dstAddr,
                               byte duration,
                               byte TcSignificance,
                               byte SecurityEnable );

/*********************************************************************
 * @fn      ZDP_AddrRsp
 *
 * @brief   Build and send a NWK_addr_rsp or IEEE_addr_rsp message.
 *
 * @param   cId - ClusterID of the rsp, either NWK_addr_rsp or IEEE_addr_rsp.
 * @param   seq - Message sequence number of the corresponding request.
 * @param   dst - Destination address for the response.
 * @param   stat - Response status: ZDP_SUCCESS or other value from ZDProfile.h
 * @param   ieee - 64-bit IEEE address of the response.
 * @param   reqType - Type of response requested (single, extended, etc.)
 * @param   nwkAddr - 16-bit network address of the response.
 * @param   devCnt  - Number of associated devices in the device address list.
 * @param   strtIdx - Starting index into the dev addr array if extended rsp.
 * @param   devAddr - Array of 16-bit network addresses of the associated devs.
 * @param   secOpt  - Security Enable Options.
 *
 * @return  afStatus_t
 */
afStatus_t ZDP_AddrRsp( byte cId, byte seq, zAddrType_t *dst, byte stat,
  byte *ieee, byte reqType, uint16 nwkAddr, byte devCnt, byte strtIdx,
  uint16 *devAddr, byte secOpt );

/*
 * ZDP_NodeDescMsg - Send a Node Descriptor message.
 */
extern afStatus_t ZDP_NodeDescMsg( byte TransSeq, zAddrType_t *dstAddr,
      uint16 nwkAddr, NodeDescriptorFormat_t *pNodeDesc, byte SecurityEnable );

/*
 * ZDP_PowerDescMsg - Send a Node Power Descriptor message.
 */
extern afStatus_t ZDP_PowerDescMsg( byte TransSeq, zAddrType_t *dstAddr,
 uint16 nwkAddr, NodePowerDescriptorFormat_t *pPowerDesc, byte SecurityEnable );

/*
 * ZDP_SimpleDescMsg - Send a Simple Descriptor message.
 */
extern afStatus_t ZDP_SimpleDescMsg( byte TransSeq, zAddrType_t *dstAddr,
                           byte Status, SimpleDescriptionFormat_t *pSimpleDesc,
                           uint16 clusterID, byte SecurityEnable );

/*
 * ZDP_EPRsp - Send a list of endpoint
 */
extern afStatus_t ZDP_EPRsp( uint16 MsgType, byte TransSeq, zAddrType_t *dstAddr, byte Status,
                                uint16 nwkAddr, byte Count, byte *pEPList,
                                byte SecurityEnable );

/*
 * ZDP_GenericRsp - Sends a response message with only the parameter response
 *                                     byte and the addr of interest for data.
 */
extern afStatus_t ZDP_GenericRsp( byte TransSeq, zAddrType_t *dstAddr,
                    byte status, uint16 aoi, uint16 rspID, byte SecurityEnable );

/*
 * ZDP_MgmtNwkDiscRsp - Sends the Management Network Discovery Response.
 */
extern afStatus_t ZDP_MgmtNwkDiscRsp( byte TransSeq, zAddrType_t *dstAddr,
                            byte Status,
                            byte NetworkCount,
                            byte StartIndex,
                            byte NetworkCountList,
                            networkDesc_t *NetworkList,
                            byte SecurityEnable );

/*
 * ZDP_MgmtLqiRsp - Sends the Management LQI Response.
 */
extern ZStatus_t ZDP_MgmtLqiRsp( byte TransSeq, zAddrType_t *dstAddr,
                          byte Status,
                          byte NeighborLqiEntries,
                          byte StartIndex,
                          byte NeighborLqiCount,
                          ZDP_MgmtLqiItem_t* NeighborList,
                          byte SecurityEnable );

/*
 * ZDP_MgmtRtgRsp - Sends the Management Routing Response.
 */
extern ZStatus_t ZDP_MgmtRtgRsp( byte TransSeq, zAddrType_t *dstAddr,
                            byte Status,
                            byte RoutingTableEntries,
                            byte StartIndex,
                            byte RoutingListCount,
                            rtgItem_t *RoutingTableList,
                            byte SecurityEnable );

/*
 * ZDP_MgmtBindRsp - Sends the Management Binding Response.
 */
extern ZStatus_t ZDP_MgmtBindRsp( byte TransSeq, zAddrType_t *dstAddr,
                            byte Status,
                            byte BindingTableEntries,
                            byte StartIndex,
                            byte BindingTableListCount,
                            apsBindingItem_t *BindingTableList,
                            byte SecurityEnable );

/*
 * ZDP_UserDescRsp - Sends the user descriptor response message.
 */
extern ZStatus_t ZDP_UserDescRsp( byte TransSeq, zAddrType_t *dstAddr,
                uint16 nwkAddrOfInterest, UserDescriptorFormat_t *userDesc,
                byte SecurityEnable );

/*
 * ZDP_ServerDiscRsp - Build and send the User Decriptor Response.
 */
#if defined ( ZDO_SERVERDISC_RESPONSE )
ZStatus_t ZDP_ServerDiscRsp( byte transID, zAddrType_t *dstAddr, byte status,
                           uint16 aoi, uint16 serverMask, byte SecurityEnable );
#endif

/*
 * ZDP_IncomingData - Incoming data callback from AF layer
 */
extern void ZDP_IncomingData( afIncomingMSGPacket_t *pData );

/*********************************************************************
*********************************************************************/

#ifdef __cplusplus
}
#endif

#endif /* ZDPROFILE_H */