upd64031a.c

来自「trident tm5600的linux驱动」· C语言 代码 · 共 255 行

C
255
字号
/* * upd64031A - NEC Electronics Ghost Reduction for NTSC in Japan * * 2003 by T.Adachi <tadachi@tadachi-net.com> * 2003 by Takeru KOMORIYA <komoriya@paken.org> * 2006 by Hans Verkuil <hverkuil@xs4all.nl> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */#include <linux/version.h>#include <linux/module.h>#include <linux/kernel.h>#include <linux/i2c.h>#include <linux/videodev2.h>#include <media/v4l2-common.h>#include <media/v4l2-chip-ident.h>#include <media/v4l2-i2c-drv.h>#include <media/upd64031a.h>#include "compat.h"/* --------------------- read registers functions define -------------------- *//* bit masks */#define GR_MODE_MASK              0xc0#define DIRECT_3DYCS_CONNECT_MASK 0xc0#define SYNC_CIRCUIT_MASK         0xa0/* -------------------------------------------------------------------------- */MODULE_DESCRIPTION("uPD64031A driver");MODULE_AUTHOR("T. Adachi, Takeru KOMORIYA, Hans Verkuil");MODULE_LICENSE("GPL");static int debug;module_param(debug, int, 0644);MODULE_PARM_DESC(debug, "Debug level (0-1)");#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 22)static unsigned short normal_i2c[] = { 0x24 >> 1, 0x26 >> 1, I2C_CLIENT_END };I2C_CLIENT_INSMOD;#endifenum {	R00 = 0, R01, R02, R03, R04,	R05, R06, R07, R08, R09,	R0A, R0B, R0C, R0D, R0E, R0F,	/* unused registers	 R10, R11, R12, R13, R14,	 R15, R16, R17,	 */	TOT_REGS};struct upd64031a_state {	u8 regs[TOT_REGS];	u8 gr_mode;	u8 direct_3dycs_connect;	u8 ext_comp_sync;	u8 ext_vert_sync;};static u8 upd64031a_init[] = {	0x00, 0xb8, 0x48, 0xd2, 0xe6,	0x03, 0x10, 0x0b, 0xaf, 0x7f,	0x00, 0x00, 0x1d, 0x5e, 0x00,	0xd0};/* ------------------------------------------------------------------------ */static u8 upd64031a_read(struct i2c_client *client, u8 reg){	u8 buf[2];	if (reg >= sizeof(buf))		return 0xff;	i2c_master_recv(client, buf, 2);	return buf[reg];}/* ------------------------------------------------------------------------ */static void upd64031a_write(struct i2c_client *client, u8 reg, u8 val){	u8 buf[2];	buf[0] = reg;	buf[1] = val;	v4l_dbg(1, debug, client, "write reg: %02X val: %02X\n", reg, val);	if (i2c_master_send(client, buf, 2) != 2)		v4l_err(client, "I/O error write 0x%02x/0x%02x\n", reg, val);}/* ------------------------------------------------------------------------ *//* The input changed due to new input or channel changed */static void upd64031a_change(struct i2c_client *client){	struct upd64031a_state *state = i2c_get_clientdata(client);	u8 reg = state->regs[R00];	v4l_dbg(1, debug, client, "changed input or channel\n");	upd64031a_write(client, R00, reg | 0x10);	upd64031a_write(client, R00, reg & ~0x10);}/* ------------------------------------------------------------------------ */static int upd64031a_command(struct i2c_client *client, unsigned cmd, void *arg){	struct upd64031a_state *state = i2c_get_clientdata(client);	struct v4l2_routing *route = arg;	switch (cmd) {	case VIDIOC_S_FREQUENCY:		upd64031a_change(client);		break;	case VIDIOC_INT_G_VIDEO_ROUTING:		route->input = (state->gr_mode >> 6) |			(state->direct_3dycs_connect >> 4) |			(state->ext_comp_sync >> 1) |			(state->ext_vert_sync >> 2);		route->output = 0;		break;	case VIDIOC_INT_S_VIDEO_ROUTING:	{		u8 r00, r05, r08;		state->gr_mode = (route->input & 3) << 6;		state->direct_3dycs_connect = (route->input & 0xc) << 4;		state->ext_comp_sync =			(route->input & UPD64031A_COMPOSITE_EXTERNAL) << 1;		state->ext_vert_sync =			(route->input & UPD64031A_VERTICAL_EXTERNAL) << 2;		r00 = (state->regs[R00] & ~GR_MODE_MASK) | state->gr_mode;		r05 = (state->regs[R00] & ~SYNC_CIRCUIT_MASK) |			state->ext_comp_sync | state->ext_vert_sync;		r08 = (state->regs[R08] & ~DIRECT_3DYCS_CONNECT_MASK) |			state->direct_3dycs_connect;		upd64031a_write(client, R00, r00);		upd64031a_write(client, R05, r05);		upd64031a_write(client, R08, r08);		upd64031a_change(client);		break;	}	case VIDIOC_LOG_STATUS:		v4l_info(client, "Status: SA00=0x%02x SA01=0x%02x\n",			upd64031a_read(client, 0), upd64031a_read(client, 1));		break;#ifdef CONFIG_VIDEO_ADV_DEBUG	case VIDIOC_DBG_G_REGISTER:	case VIDIOC_DBG_S_REGISTER:	{		struct v4l2_register *reg = arg;		if (!v4l2_chip_match_i2c_client(client,					reg->match_type, reg->match_chip))			return -EINVAL;		if (!capable(CAP_SYS_ADMIN))			return -EPERM;		if (cmd == VIDIOC_DBG_G_REGISTER) {			reg->val = upd64031a_read(client, reg->reg & 0xff);			break;		}		upd64031a_write(client, reg->reg & 0xff, reg->val & 0xff);		break;	}#endif	case VIDIOC_G_CHIP_IDENT:		return v4l2_chip_ident_i2c_client(client, arg,				V4L2_IDENT_UPD64031A, 0);	default:		break;	}	return 0;}/* ------------------------------------------------------------------------ *//* i2c implementation */static int upd64031a_probe(struct i2c_client *client,			   const struct i2c_device_id *id){	struct upd64031a_state *state;	int i;	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))		return -EIO;	v4l_info(client, "chip found @ 0x%x (%s)\n",			client->addr << 1, client->adapter->name);	state = kmalloc(sizeof(struct upd64031a_state), GFP_KERNEL);	if (state == NULL)		return -ENOMEM;	i2c_set_clientdata(client, state);	memcpy(state->regs, upd64031a_init, sizeof(state->regs));	state->gr_mode = UPD64031A_GR_ON << 6;	state->direct_3dycs_connect = UPD64031A_3DYCS_COMPOSITE << 4;	state->ext_comp_sync = state->ext_vert_sync = 0;	for (i = 0; i < TOT_REGS; i++)		upd64031a_write(client, i, state->regs[i]);	return 0;}static int upd64031a_remove(struct i2c_client *client){	kfree(i2c_get_clientdata(client));	return 0;}/* ----------------------------------------------------------------------- */#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26)static const struct i2c_device_id upd64031a_id[] = {	{ "upd64031a", 0 },	{ }};MODULE_DEVICE_TABLE(i2c, upd64031a_id);#endifstatic struct v4l2_i2c_driver_data v4l2_i2c_data = {	.name = "upd64031a",	.driverid = I2C_DRIVERID_UPD64031A,	.command = upd64031a_command,	.probe = upd64031a_probe,	.remove = upd64031a_remove,#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26)	.id_table = upd64031a_id,#endif};

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?