⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 mt2131.c

📁 trident tm5600的linux驱动
💻 C
字号:
/* *  Driver for Microtune MT2131 "QAM/8VSB single chip tuner" * *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org> * *  This program is free software; you can redistribute it and/or modify *  it under the terms of the GNU General Public License as published by *  the Free Software Foundation; either version 2 of the License, or *  (at your option) any later version. * *  This program is distributed in the hope that it will be useful, *  but WITHOUT ANY WARRANTY; without even the implied warranty of *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * *  GNU General Public License for more details. * *  You should have received a copy of the GNU General Public License *  along with this program; if not, write to the Free Software *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */#include <linux/module.h>#include <linux/delay.h>#include <linux/dvb/frontend.h>#include <linux/i2c.h>#include "compat.h"#include "dvb_frontend.h"#include "mt2131.h"#include "mt2131_priv.h"static int debug;module_param(debug, int, 0644);MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");#define dprintk(level,fmt, arg...) if (debug >= level) \	printk(KERN_INFO "%s: " fmt, "mt2131", ## arg)static u8 mt2131_config1[] = {	0x01,	0x50, 0x00, 0x50, 0x80, 0x00, 0x49, 0xfa, 0x88,	0x08, 0x77, 0x41, 0x04, 0x00, 0x00, 0x00, 0x32,	0x7f, 0xda, 0x4c, 0x00, 0x10, 0xaa, 0x78, 0x80,	0xff, 0x68, 0xa0, 0xff, 0xdd, 0x00, 0x00};static u8 mt2131_config2[] = {	0x10,	0x7f, 0xc8, 0x0a, 0x5f, 0x00, 0x04};static int mt2131_readreg(struct mt2131_priv *priv, u8 reg, u8 *val){	struct i2c_msg msg[2] = {		{ .addr = priv->cfg->i2c_address, .flags = 0,		  .buf = &reg, .len = 1 },		{ .addr = priv->cfg->i2c_address, .flags = I2C_M_RD,		  .buf = val,  .len = 1 },	};	if (i2c_transfer(priv->i2c, msg, 2) != 2) {		printk(KERN_WARNING "mt2131 I2C read failed\n");		return -EREMOTEIO;	}	return 0;}static int mt2131_writereg(struct mt2131_priv *priv, u8 reg, u8 val){	u8 buf[2] = { reg, val };	struct i2c_msg msg = { .addr = priv->cfg->i2c_address, .flags = 0,			       .buf = buf, .len = 2 };	if (i2c_transfer(priv->i2c, &msg, 1) != 1) {		printk(KERN_WARNING "mt2131 I2C write failed\n");		return -EREMOTEIO;	}	return 0;}static int mt2131_writeregs(struct mt2131_priv *priv,u8 *buf, u8 len){	struct i2c_msg msg = { .addr = priv->cfg->i2c_address,			       .flags = 0, .buf = buf, .len = len };	if (i2c_transfer(priv->i2c, &msg, 1) != 1) {		printk(KERN_WARNING "mt2131 I2C write failed (len=%i)\n",		       (int)len);		return -EREMOTEIO;	}	return 0;}static int mt2131_set_params(struct dvb_frontend *fe,			     struct dvb_frontend_parameters *params){	struct mt2131_priv *priv;	int ret=0, i;	u32 freq;	u8  if_band_center;	u32 f_lo1, f_lo2;	u32 div1, num1, div2, num2;	u8  b[8];	u8 lockval = 0;	priv = fe->tuner_priv;	if (fe->ops.info.type == FE_OFDM)		priv->bandwidth = params->u.ofdm.bandwidth;	else		priv->bandwidth = 0;	freq = params->frequency / 1000;  // Hz -> kHz	dprintk(1, "%s() freq=%d\n", __func__, freq);	f_lo1 = freq + MT2131_IF1 * 1000;	f_lo1 = (f_lo1 / 250) * 250;	f_lo2 = f_lo1 - freq - MT2131_IF2;	priv->frequency =  (f_lo1 - f_lo2 - MT2131_IF2) * 1000;	/* Frequency LO1 = 16MHz * (DIV1 + NUM1/8192 ) */	num1 = f_lo1 * 64 / (MT2131_FREF / 128);	div1 = num1 / 8192;	num1 &= 0x1fff;	/* Frequency LO2 = 16MHz * (DIV2 + NUM2/8192 ) */	num2 = f_lo2 * 64 / (MT2131_FREF / 128);	div2 = num2 / 8192;	num2 &= 0x1fff;	if (freq <=   82500) if_band_center = 0x00; else	if (freq <=  137500) if_band_center = 0x01; else	if (freq <=  192500) if_band_center = 0x02; else	if (freq <=  247500) if_band_center = 0x03; else	if (freq <=  302500) if_band_center = 0x04; else	if (freq <=  357500) if_band_center = 0x05; else	if (freq <=  412500) if_band_center = 0x06; else	if (freq <=  467500) if_band_center = 0x07; else	if (freq <=  522500) if_band_center = 0x08; else	if (freq <=  577500) if_band_center = 0x09; else	if (freq <=  632500) if_band_center = 0x0A; else	if (freq <=  687500) if_band_center = 0x0B; else	if (freq <=  742500) if_band_center = 0x0C; else	if (freq <=  797500) if_band_center = 0x0D; else	if (freq <=  852500) if_band_center = 0x0E; else	if (freq <=  907500) if_band_center = 0x0F; else	if (freq <=  962500) if_band_center = 0x10; else	if (freq <= 1017500) if_band_center = 0x11; else	if (freq <= 1072500) if_band_center = 0x12; else if_band_center = 0x13;	b[0] = 1;	b[1] = (num1 >> 5) & 0xFF;	b[2] = (num1 & 0x1F);	b[3] = div1;	b[4] = (num2 >> 5) & 0xFF;	b[5] = num2 & 0x1F;	b[6] = div2;	dprintk(1, "IF1: %dMHz IF2: %dMHz\n", MT2131_IF1, MT2131_IF2);	dprintk(1, "PLL freq=%dkHz  band=%d\n", (int)freq, (int)if_band_center);	dprintk(1, "PLL f_lo1=%dkHz  f_lo2=%dkHz\n", (int)f_lo1, (int)f_lo2);	dprintk(1, "PLL div1=%d  num1=%d  div2=%d  num2=%d\n",		(int)div1, (int)num1, (int)div2, (int)num2);	dprintk(1, "PLL [1..6]: %2x %2x %2x %2x %2x %2x\n",		(int)b[1], (int)b[2], (int)b[3], (int)b[4], (int)b[5],		(int)b[6]);	ret = mt2131_writeregs(priv,b,7);	if (ret < 0)		return ret;	mt2131_writereg(priv, 0x0b, if_band_center);	/* Wait for lock */	i = 0;	do {		mt2131_readreg(priv, 0x08, &lockval);		if ((lockval & 0x88) == 0x88)			break;		msleep(4);		i++;	} while (i < 10);	return ret;}static int mt2131_get_frequency(struct dvb_frontend *fe, u32 *frequency){	struct mt2131_priv *priv = fe->tuner_priv;	dprintk(1, "%s()\n", __func__);	*frequency = priv->frequency;	return 0;}static int mt2131_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth){	struct mt2131_priv *priv = fe->tuner_priv;	dprintk(1, "%s()\n", __func__);	*bandwidth = priv->bandwidth;	return 0;}static int mt2131_get_status(struct dvb_frontend *fe, u32 *status){	struct mt2131_priv *priv = fe->tuner_priv;	u8 lock_status = 0;	u8 afc_status = 0;	*status = 0;	mt2131_readreg(priv, 0x08, &lock_status);	if ((lock_status & 0x88) == 0x88)		*status = TUNER_STATUS_LOCKED;	mt2131_readreg(priv, 0x09, &afc_status);	dprintk(1, "%s() - LO Status = 0x%x, AFC Status = 0x%x\n",		__func__, lock_status, afc_status);	return 0;}static int mt2131_init(struct dvb_frontend *fe){	struct mt2131_priv *priv = fe->tuner_priv;	int ret;	dprintk(1, "%s()\n", __func__);	if ((ret = mt2131_writeregs(priv, mt2131_config1,				    sizeof(mt2131_config1))) < 0)		return ret;	mt2131_writereg(priv, 0x0b, 0x09);	mt2131_writereg(priv, 0x15, 0x47);	mt2131_writereg(priv, 0x07, 0xf2);	mt2131_writereg(priv, 0x0b, 0x01);	if ((ret = mt2131_writeregs(priv, mt2131_config2,				    sizeof(mt2131_config2))) < 0)		return ret;	return ret;}static int mt2131_release(struct dvb_frontend *fe){	dprintk(1, "%s()\n", __func__);	kfree(fe->tuner_priv);	fe->tuner_priv = NULL;	return 0;}static const struct dvb_tuner_ops mt2131_tuner_ops = {	.info = {		.name           = "Microtune MT2131",		.frequency_min  =  48000000,		.frequency_max  = 860000000,		.frequency_step =     50000,	},	.release       = mt2131_release,	.init          = mt2131_init,	.set_params    = mt2131_set_params,	.get_frequency = mt2131_get_frequency,	.get_bandwidth = mt2131_get_bandwidth,	.get_status    = mt2131_get_status};struct dvb_frontend * mt2131_attach(struct dvb_frontend *fe,				    struct i2c_adapter *i2c,				    struct mt2131_config *cfg, u16 if1){	struct mt2131_priv *priv = NULL;	u8 id = 0;	dprintk(1, "%s()\n", __func__);	priv = kzalloc(sizeof(struct mt2131_priv), GFP_KERNEL);	if (priv == NULL)		return NULL;	priv->cfg = cfg;	priv->bandwidth = 6000000; /* 6MHz */	priv->i2c = i2c;	if (mt2131_readreg(priv, 0, &id) != 0) {		kfree(priv);		return NULL;	}	if ( (id != 0x3E) && (id != 0x3F) ) {		printk(KERN_ERR "MT2131: Device not found at addr 0x%02x\n",		       cfg->i2c_address);		kfree(priv);		return NULL;	}	printk(KERN_INFO "MT2131: successfully identified at address 0x%02x\n",	       cfg->i2c_address);	memcpy(&fe->ops.tuner_ops, &mt2131_tuner_ops,	       sizeof(struct dvb_tuner_ops));	fe->tuner_priv = priv;	return fe;}EXPORT_SYMBOL(mt2131_attach);MODULE_AUTHOR("Steven Toth");MODULE_DESCRIPTION("Microtune MT2131 silicon tuner driver");MODULE_LICENSE("GPL");/* * Local variables: * c-basic-offset: 8 */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -