tea5767.c

trident tm5600的linux驱动

/*
 * For Philips TEA5767 FM Chip used on some TV Cards like Prolink Pixelview
 * I2C address is allways 0xC0.
 *
 *
 * Copyright (c) 2005 Mauro Carvalho Chehab ([e-mail])
 * This code is placed under the terms of the GNU General Public License
 *
 * tea5767 autodetection thanks to Torsten Seeboth and Atsushi Nakagawa
 * from their contributions on DScaler.
 */

#include <linux/i2c.h>
#include <linux/delay.h>
#include "compat.h"
#include <linux/videodev.h>
#include "tuner-i2c.h"
#include "tea5767.h"

static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "enable verbose debug messages");

/*****************************************************************************/

struct tea5767_priv {
	struct tuner_i2c_props	i2c_props;
	u32			frequency;
	struct tea5767_ctrl	ctrl;
};

/*****************************************************************************/

/******************************
 * Write mode register values *
 ******************************/

/* First register */
#define TEA5767_MUTE		0x80	/* Mutes output */
#define TEA5767_SEARCH		0x40	/* Activates station search */
/* Bits 0-5 for divider MSB */

/* Second register */
/* Bits 0-7 for divider LSB */

/* Third register */

/* Station search from botton to up */
#define TEA5767_SEARCH_UP	0x80

/* Searches with ADC output = 10 */
#define TEA5767_SRCH_HIGH_LVL	0x60

/* Searches with ADC output = 10 */
#define TEA5767_SRCH_MID_LVL	0x40

/* Searches with ADC output = 5 */
#define TEA5767_SRCH_LOW_LVL	0x20

/* if on, div=4*(Frf+Fif)/Fref otherwise, div=4*(Frf-Fif)/Freq) */
#define TEA5767_HIGH_LO_INJECT	0x10

/* Disable stereo */
#define TEA5767_MONO		0x08

/* Disable right channel and turns to mono */
#define TEA5767_MUTE_RIGHT	0x04

/* Disable left channel and turns to mono */
#define TEA5767_MUTE_LEFT	0x02

#define TEA5767_PORT1_HIGH	0x01

/* Fourth register */
#define TEA5767_PORT2_HIGH	0x80
/* Chips stops working. Only I2C bus remains on */
#define TEA5767_STDBY		0x40

/* Japan freq (76-108 MHz. If disabled, 87.5-108 MHz */
#define TEA5767_JAPAN_BAND	0x20

/* Unselected means 32.768 KHz freq as reference. Otherwise Xtal at 13 MHz */
#define TEA5767_XTAL_32768	0x10

/* Cuts weak signals */
#define TEA5767_SOFT_MUTE	0x08

/* Activates high cut control */
#define TEA5767_HIGH_CUT_CTRL	0x04

/* Activates stereo noise control */
#define TEA5767_ST_NOISE_CTL	0x02

/* If activate PORT 1 indicates SEARCH or else it is used as PORT1 */
#define TEA5767_SRCH_IND	0x01

/* Fifth register */

/* By activating, it will use Xtal at 13 MHz as reference for divider */
#define TEA5767_PLLREF_ENABLE	0x80

/* By activating, deemphasis=50, or else, deemphasis of 50us */
#define TEA5767_DEEMPH_75	0X40

/*****************************
 * Read mode register values *
 *****************************/

/* First register */
#define TEA5767_READY_FLAG_MASK	0x80
#define TEA5767_BAND_LIMIT_MASK	0X40
/* Bits 0-5 for divider MSB after search or preset */

/* Second register */
/* Bits 0-7 for divider LSB after search or preset */

/* Third register */
#define TEA5767_STEREO_MASK	0x80
#define TEA5767_IF_CNTR_MASK	0x7f

/* Fourth register */
#define TEA5767_ADC_LEVEL_MASK	0xf0

/* should be 0 */
#define TEA5767_CHIP_ID_MASK	0x0f

/* Fifth register */
/* Reserved for future extensions */
#define TEA5767_RESERVED_MASK	0xff

/*****************************************************************************/

static void tea5767_status_dump(struct tea5767_priv *priv,
				unsigned char *buffer)
{
	unsigned int div, frq;

	if (TEA5767_READY_FLAG_MASK & buffer[0])
		tuner_info("Ready Flag ON\n");
	else
		tuner_info("Ready Flag OFF\n");

	if (TEA5767_BAND_LIMIT_MASK & buffer[0])
		tuner_info("Tuner at band limit\n");
	else
		tuner_info("Tuner not at band limit\n");

	div = ((buffer[0] & 0x3f) << 8) | buffer[1];

	switch (priv->ctrl.xtal_freq) {
	case TEA5767_HIGH_LO_13MHz:
		frq = (div * 50000 - 700000 - 225000) / 4;	/* Freq in KHz */
		break;
	case TEA5767_LOW_LO_13MHz:
		frq = (div * 50000 + 700000 + 225000) / 4;	/* Freq in KHz */
		break;
	case TEA5767_LOW_LO_32768:
		frq = (div * 32768 + 700000 + 225000) / 4;	/* Freq in KHz */
		break;
	case TEA5767_HIGH_LO_32768:
	default:
		frq = (div * 32768 - 700000 - 225000) / 4;	/* Freq in KHz */
		break;
	}
	buffer[0] = (div >> 8) & 0x3f;
	buffer[1] = div & 0xff;

	tuner_info("Frequency %d.%03d KHz (divider = 0x%04x)\n",
		   frq / 1000, frq % 1000, div);

	if (TEA5767_STEREO_MASK & buffer[2])
		tuner_info("Stereo\n");
	else
		tuner_info("Mono\n");

	tuner_info("IF Counter = %d\n", buffer[2] & TEA5767_IF_CNTR_MASK);

	tuner_info("ADC Level = %d\n",
		   (buffer[3] & TEA5767_ADC_LEVEL_MASK) >> 4);

	tuner_info("Chip ID = %d\n", (buffer[3] & TEA5767_CHIP_ID_MASK));

	tuner_info("Reserved = 0x%02x\n",
		   (buffer[4] & TEA5767_RESERVED_MASK));
}

/* Freq should be specifyed at 62.5 Hz */
static int set_radio_freq(struct dvb_frontend *fe,
			  struct analog_parameters *params)
{
	struct tea5767_priv *priv = fe->tuner_priv;
	unsigned int frq = params->frequency;
	unsigned char buffer[5];
	unsigned div;
	int rc;

	tuner_dbg("radio freq = %d.%03d MHz\n", frq/16000,(frq/16)%1000);

	buffer[2] = 0;

	if (priv->ctrl.port1)
		buffer[2] |= TEA5767_PORT1_HIGH;

	if (params->audmode == V4L2_TUNER_MODE_MONO) {
		tuner_dbg("TEA5767 set to mono\n");
		buffer[2] |= TEA5767_MONO;
	} else {
		tuner_dbg("TEA5767 set to stereo\n");
	}


	buffer[3] = 0;

	if (priv->ctrl.port2)
		buffer[3] |= TEA5767_PORT2_HIGH;

	if (priv->ctrl.high_cut)
		buffer[3] |= TEA5767_HIGH_CUT_CTRL;

	if (priv->ctrl.st_noise)
		buffer[3] |= TEA5767_ST_NOISE_CTL;

	if (priv->ctrl.soft_mute)
		buffer[3] |= TEA5767_SOFT_MUTE;

	if (priv->ctrl.japan_band)
		buffer[3] |= TEA5767_JAPAN_BAND;

	buffer[4] = 0;

	if (priv->ctrl.deemph_75)
		buffer[4] |= TEA5767_DEEMPH_75;

	if (priv->ctrl.pllref)
		buffer[4] |= TEA5767_PLLREF_ENABLE;


	/* Rounds freq to next decimal value - for 62.5 KHz step */
	/* frq = 20*(frq/16)+radio_frq[frq%16]; */

	switch (priv->ctrl.xtal_freq) {
	case TEA5767_HIGH_LO_13MHz:
		tuner_dbg("radio HIGH LO inject xtal @ 13 MHz\n");
		buffer[2] |= TEA5767_HIGH_LO_INJECT;
		div = (frq * (4000 / 16) + 700000 + 225000 + 25000) / 50000;
		break;
	case TEA5767_LOW_LO_13MHz:
		tuner_dbg("radio LOW LO inject xtal @ 13 MHz\n");

		div = (frq * (4000 / 16) - 700000 - 225000 + 25000) / 50000;
		break;
	case TEA5767_LOW_LO_32768:
		tuner_dbg("radio LOW LO inject xtal @ 32,768 MHz\n");
		buffer[3] |= TEA5767_XTAL_32768;
		/* const 700=4000*175 Khz - to adjust freq to right value */
		div = ((frq * (4000 / 16) - 700000 - 225000) + 16384) >> 15;
		break;
	case TEA5767_HIGH_LO_32768:
	default:
		tuner_dbg("radio HIGH LO inject xtal @ 32,768 MHz\n");

		buffer[2] |= TEA5767_HIGH_LO_INJECT;
		buffer[3] |= TEA5767_XTAL_32768;
		div = ((frq * (4000 / 16) + 700000 + 225000) + 16384) >> 15;
		break;
	}
	buffer[0] = (div >> 8) & 0x3f;
	buffer[1] = div & 0xff;

	if (5 != (rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 5)))
		tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);

	if (debug) {
		if (5 != (rc = tuner_i2c_xfer_recv(&priv->i2c_props, buffer, 5)))
			tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
		else
			tea5767_status_dump(priv, buffer);
	}

	priv->frequency = frq * 125 / 2;

	return 0;
}

static int tea5767_read_status(struct dvb_frontend *fe, char *buffer)
{
	struct tea5767_priv *priv = fe->tuner_priv;
	int rc;

	memset(buffer, 0, 5);
	if (5 != (rc = tuner_i2c_xfer_recv(&priv->i2c_props, buffer, 5))) {
		tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
		return -EREMOTEIO;
	}

	return 0;
}

static inline int tea5767_signal(struct dvb_frontend *fe, const char *buffer)
{
	struct tea5767_priv *priv = fe->tuner_priv;

	int signal = ((buffer[3] & TEA5767_ADC_LEVEL_MASK) << 8);

	tuner_dbg("Signal strength: %d\n", signal);

	return signal;
}

static inline int tea5767_stereo(struct dvb_frontend *fe, const char *buffer)
{
	struct tea5767_priv *priv = fe->tuner_priv;

	int stereo = buffer[2] & TEA5767_STEREO_MASK;

	tuner_dbg("Radio ST GET = %02x\n", stereo);

	return (stereo ? V4L2_TUNER_SUB_STEREO : 0);
}

static int tea5767_get_status(struct dvb_frontend *fe, u32 *status)
{
	unsigned char buffer[5];

	*status = 0;

	if (0 == tea5767_read_status(fe, buffer)) {
		if (tea5767_signal(fe, buffer))
			*status = TUNER_STATUS_LOCKED;
		if (tea5767_stereo(fe, buffer))
			*status |= TUNER_STATUS_STEREO;
	}

	return 0;
}

static int tea5767_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
{
	unsigned char buffer[5];

	*strength = 0;

	if (0 == tea5767_read_status(fe, buffer))
		*strength = tea5767_signal(fe, buffer);

	return 0;
}

static int tea5767_standby(struct dvb_frontend *fe)
{
	unsigned char buffer[5];
	struct tea5767_priv *priv = fe->tuner_priv;
	unsigned div, rc;

	div = (87500 * 4 + 700 + 225 + 25) / 50; /* Set frequency to 87.5 MHz */
	buffer[0] = (div >> 8) & 0x3f;
	buffer[1] = div & 0xff;
	buffer[2] = TEA5767_PORT1_HIGH;
	buffer[3] = TEA5767_PORT2_HIGH | TEA5767_HIGH_CUT_CTRL |
		    TEA5767_ST_NOISE_CTL | TEA5767_JAPAN_BAND | TEA5767_STDBY;
	buffer[4] = 0;

	if (5 != (rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 5)))
		tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);

	return 0;
}

int tea5767_autodetection(struct i2c_adapter* i2c_adap, u8 i2c_addr)
{
	struct tuner_i2c_props i2c = { .adap = i2c_adap, .addr = i2c_addr };
	unsigned char buffer[7] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
	int rc;
#if 0 /* Needed if uncomment I2C send code below */
	int div;
#endif

	if ((rc = tuner_i2c_xfer_recv(&i2c, buffer, 7))< 5) {
		printk(KERN_WARNING "It is not a TEA5767. Received %i bytes.\n", rc);
		return -EINVAL;
	}

	/* If all bytes are the same then it's a TV tuner and not a tea5767 */
	if (buffer[0] == buffer[1] && buffer[0] == buffer[2] &&
	    buffer[0] == buffer[3] && buffer[0] == buffer[4]) {
		printk(KERN_WARNING "All bytes are equal. It is not a TEA5767\n");
		return -EINVAL;
	}

	/*  Status bytes:
	 *  Byte 4: bit 3:1 : CI (Chip Identification) == 0
	 *          bit 0   : internally set to 0
	 *  Byte 5: bit 7:0 : == 0
	 */
	if (((buffer[3] & 0x0f) != 0x00) || (buffer[4] != 0x00)) {
		printk(KERN_WARNING "Chip ID is not zero. It is not a TEA5767\n");
		return -EINVAL;
	}

#if 0	/* Not working for TEA5767 in Beholder Columbus card */
	/* It seems that tea5767 returns 0xff after the 5th byte */
	if ((buffer[5] != 0xff) || (buffer[6] != 0xff)) {
		printk(KERN_WARNING "Returned more than 5 bytes. It is not a TEA5767\n");
		return -EINVAL;
	}
#endif

#if 0 /*Sometimes, this code doesn't work */
	/* Sets tuner at some freq (87.5 MHz) and see if it is ok */
	div = ((87500 * 4000 + 700000 + 225000) + 16768) >> 15;
	buffer[0] = ((div >> 8) & 0x3f) | TEA5767_MUTE;
	buffer[1] = div & 0xff;
	buffer[2] = TEA5767_PORT1_HIGH;
	buffer[3] = TEA5767_PORT2_HIGH | TEA5767_HIGH_CUT_CTRL |
		    TEA5767_ST_NOISE_CTL;
	buffer[4] = 0;

	if (5 != (rc = tuner_i2c_xfer_send(&i2c, buffer, 5)))
		printk(KERN_WARNING "i2c i/o error: rc == %d (should be 5)\n", rc);

	msleep(15);

	if (5 != (rc = tuner_i2c_xfer_recv(&i2c, buffer, 5))) {
		printk(KERN_WARNING "It is not a TEA5767. Received %i bytes.\n", rc);
		return -EINVAL;
	}

	/* Initial freq for 32.768KHz clock */
	if ((buffer[1] != (div & 0xff) ) || ((buffer[0] & 0x3f) != ((div >> 8) & 0x3f))) {
		printk(KERN_WARNING "It is not a TEA5767. div=%d, Return: %02x %02x %02x %02x %02x\n",
				div,buffer[0],buffer[1],buffer[2],buffer[3],buffer[4]);
		tea5767_status_dump(buffer);
		return -EINVAL;
	}
#endif
	return 0;
}

static int tea5767_release(struct dvb_frontend *fe)
{
	kfree(fe->tuner_priv);
	fe->tuner_priv = NULL;

	return 0;
}

static int tea5767_get_frequency(struct dvb_frontend *fe, u32 *frequency)
{
	struct tea5767_priv *priv = fe->tuner_priv;
	*frequency = priv->frequency;

	return 0;
}

static int tea5767_set_config (struct dvb_frontend *fe, void *priv_cfg)
{
	struct tea5767_priv *priv = fe->tuner_priv;

	memcpy(&priv->ctrl, priv_cfg, sizeof(priv->ctrl));

	return 0;
}

static struct dvb_tuner_ops tea5767_tuner_ops = {
	.info = {
		.name           = "tea5767", // Philips TEA5767HN FM Radio
#if 0
		.frequency_min  = ,
		.frequency_max  = ,
		.frequency_step = ,
#endif
	},

	.set_analog_params = set_radio_freq,
	.set_config	   = tea5767_set_config,
	.sleep             = tea5767_standby,
	.release           = tea5767_release,
	.get_frequency     = tea5767_get_frequency,
	.get_status        = tea5767_get_status,
	.get_rf_strength   = tea5767_get_rf_strength,
};

struct dvb_frontend *tea5767_attach(struct dvb_frontend *fe,
				    struct i2c_adapter* i2c_adap,
				    u8 i2c_addr)
{
	struct tea5767_priv *priv = NULL;

#if 0 /* By removing autodetection allows forcing TEA chip */
	if (tea5767_autodetection(i2c_adap, i2c_addr) == -EINVAL)
		return -EINVAL;
#endif
	priv = kzalloc(sizeof(struct tea5767_priv), GFP_KERNEL);
	if (priv == NULL)
		return NULL;
	fe->tuner_priv = priv;

	priv->i2c_props.addr  = i2c_addr;
	priv->i2c_props.adap  = i2c_adap;
	priv->i2c_props.name  = "tea5767";

	priv->ctrl.xtal_freq  = TEA5767_HIGH_LO_32768;
	priv->ctrl.port1      = 1;
	priv->ctrl.port2      = 1;
	priv->ctrl.high_cut   = 1;
	priv->ctrl.st_noise   = 1;
	priv->ctrl.japan_band = 1;

	memcpy(&fe->ops.tuner_ops, &tea5767_tuner_ops,
	       sizeof(struct dvb_tuner_ops));

	tuner_info("type set to %s\n", "Philips TEA5767HN FM Radio");

	return fe;
}

EXPORT_SYMBOL_GPL(tea5767_attach);
EXPORT_SYMBOL_GPL(tea5767_autodetection);

MODULE_DESCRIPTION("Philips TEA5767 FM tuner driver");
MODULE_AUTHOR("Mauro Carvalho Chehab <[e-mail]>");
MODULE_LICENSE("GPL");