bsbe1.h

来自「trident tm5600的linux驱动」· C头文件 代码 · 共 106 行

H
106
字号
/* * bsbe1.h - ALPS BSBE1 tuner support * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * Or, point your browser to http://www.gnu.org/copyleft/gpl.html * * * the project's page is at http://www.linuxtv.org */#ifndef BSBE1_H#define BSBE1_Hstatic u8 alps_bsbe1_inittab[] = {	0x01, 0x15,   /* XTAL = 4MHz, VCO = 352 MHz */	0x02, 0x30,   /* MCLK = 88 MHz */	0x03, 0x00,   /* ACR output 0 */	0x04, 0x7d,   /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */	0x05, 0x05,   /* I2CT = 0, SCLT = 1, SDAT = 1 */	0x06, 0x00,   /* DAC output 0 */	0x08, 0x40,   /* DiSEqC off, LNB power on OP2/LOCK pin on */	0x09, 0x00,   /* FIFO */	0x0c, 0x51,   /* OP1/OP0 normal, val = 1 (LNB power on) */	0x0d, 0x82,   /* DC offset compensation = on, beta_agc1 = 2 */	0x0f, 0x92,   /* AGC1R */	0x10, 0x34,   /* AGC2O */	0x11, 0x84,   /* TLSR */	0x12, 0xb9,   /* CFD */	0x15, 0xc9,   /* lock detector threshold */	0x28, 0x00,   /* out imp: normal, type: parallel, FEC mode: QPSK */	0x33, 0xfc,   /* RS control */	0x34, 0x93,   /* count viterbi bit errors per 2E18 bytes */	0xff, 0xff};static int alps_bsbe1_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio){	u8 aclk = 0;	u8 bclk = 0;	if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }	else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }	else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }	else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }	else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }	else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }	stv0299_writereg(fe, 0x13, aclk);	stv0299_writereg(fe, 0x14, bclk);	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);	stv0299_writereg(fe, 0x20, (ratio >>  8) & 0xff);	stv0299_writereg(fe, 0x21, (ratio      ) & 0xf0);	return 0;}static int alps_bsbe1_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params){	int ret;	u8 data[4];	u32 div;	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };	struct i2c_adapter *i2c = fe->tuner_priv;	if ((params->frequency < 950000) || (params->frequency > 2150000))		return -EINVAL;	div = params->frequency / 1000;	data[0] = (div >> 8) & 0x7f;	data[1] = div & 0xff;	data[2] = 0x80 | ((div & 0x18000) >> 10) | 0x1;	data[3] = 0xe0;	if (fe->ops.i2c_gate_ctrl)		fe->ops.i2c_gate_ctrl(fe, 1);	ret = i2c_transfer(i2c, &msg, 1);	return (ret != 1) ? -EIO : 0;}static struct stv0299_config alps_bsbe1_config = {	.demod_address = 0x68,	.inittab = alps_bsbe1_inittab,	.mclk = 88000000UL,	.invert = 1,	.skip_reinit = 0,	.min_delay_ms = 100,	.set_symbol_rate = alps_bsbe1_set_symbol_rate,};#endif

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?