📄 gp8psk.c
字号:
/* DVB USB compliant Linux driver for the * - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module * * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com) * Copyright (C) 2006,2007 Genpix Electronics (genpix@genpix-electronics.com) * * Thanks to GENPIX for the sample code used to implement this module. * * This module is based off the vp7045 and vp702x modules * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * * see Documentation/dvb/README.dvb-usb for more information */#include "gp8psk.h"/* debug */static char bcm4500_firmware[] = "dvb-usb-gp8psk-02.fw";int dvb_usb_gp8psk_debug;module_param_named(debug,dvb_usb_gp8psk_debug, int, 0644);MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS);DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen){ int ret = 0,try = 0; if ((ret = mutex_lock_interruptible(&d->usb_mutex))) return ret; while (ret >= 0 && ret != blen && try < 3) { ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev,0), req, USB_TYPE_VENDOR | USB_DIR_IN, value,index,b,blen, 2000); deb_info("reading number %d (ret: %d)\n",try,ret); try++; } if (ret < 0 || ret != blen) { warn("usb in %d operation failed.", req); ret = -EIO; } else ret = 0; deb_xfer("in: req. %x, val: %x, ind: %x, buffer: ",req,value,index); debug_dump(b,blen,deb_xfer); mutex_unlock(&d->usb_mutex); return ret;}int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen){ int ret; deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index); debug_dump(b,blen,deb_xfer); if ((ret = mutex_lock_interruptible(&d->usb_mutex))) return ret; if (usb_control_msg(d->udev, usb_sndctrlpipe(d->udev,0), req, USB_TYPE_VENDOR | USB_DIR_OUT, value,index,b,blen, 2000) != blen) { warn("usb out operation failed."); ret = -EIO; } else ret = 0; mutex_unlock(&d->usb_mutex); return ret;}static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d){ int ret; const struct firmware *fw = NULL; const u8 *ptr; u8 *buf; if ((ret = request_firmware(&fw, bcm4500_firmware, &d->udev->dev)) != 0) { err("did not find the bcm4500 firmware file. (%s) " "Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)", bcm4500_firmware,ret); return ret; } ret = -EINVAL; if (gp8psk_usb_out_op(d, LOAD_BCM4500,1,0,NULL, 0)) goto out_rel_fw; info("downloading bcm4500 firmware from file '%s'",bcm4500_firmware); ptr = fw->data; buf = kmalloc(64, GFP_KERNEL | GFP_DMA); while (ptr[0] != 0xff) { u16 buflen = ptr[0] + 4; if (ptr + buflen >= fw->data + fw->size) { err("failed to load bcm4500 firmware."); goto out_free; } memcpy(buf, ptr, buflen); if (dvb_usb_generic_write(d, buf, buflen)) { err("failed to load bcm4500 firmware."); goto out_free; } ptr += buflen; } ret = 0;out_free: kfree(buf);out_rel_fw: release_firmware(fw); return ret;}static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff){ u8 status, buf; int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct); if (onoff) { gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1); if (! (status & bm8pskStarted)) { /* started */ if(gp_product_id == USB_PID_GENPIX_SKYWALKER_CW3K) gp8psk_usb_out_op(d, CW3K_INIT, 1, 0, NULL, 0); if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1)) return -EINVAL; } if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) if (! (status & bm8pskFW_Loaded)) /* BCM4500 firmware loaded */ if(gp8psk_load_bcm4500fw(d)) return -EINVAL; if (! (status & bmIntersilOn)) /* LNB Power */ if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0, &buf, 1)) return -EINVAL; /* Set DVB mode to 1 */ if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) if (gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0)) return -EINVAL; /* Abort possible TS (if previous tune crashed) */ if (gp8psk_usb_out_op(d, ARM_TRANSFER, 0, 0, NULL, 0)) return -EINVAL; } else { /* Turn off LNB power */ if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1)) return -EINVAL; /* Turn off 8psk power */ if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1)) return -EINVAL; if(gp_product_id == USB_PID_GENPIX_SKYWALKER_CW3K) gp8psk_usb_out_op(d, CW3K_INIT, 0, 0, NULL, 0); } return 0;}#if 0int gp8psk_bcm4500_reload(struct dvb_usb_device *d){ u8 buf; int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct); /* Turn off 8psk power */ if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1)) return -EINVAL; /* Turn On 8psk power */ if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1)) return -EINVAL; /* load BCM4500 firmware */ if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) if (gp8psk_load_bcm4500fw(d)) return EINVAL; return 0;}#endif /* 0 */static int gp8psk_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff){ return gp8psk_usb_out_op(adap->dev, ARM_TRANSFER, onoff, 0 , NULL, 0);}static int gp8psk_frontend_attach(struct dvb_usb_adapter *adap){ adap->fe = gp8psk_fe_attach(adap->dev); return 0;}static struct dvb_usb_device_properties gp8psk_properties;static int gp8psk_usb_probe(struct usb_interface *intf, const struct usb_device_id *id){ int ret; struct usb_device *udev = interface_to_usbdev(intf); ret = dvb_usb_device_init(intf, &gp8psk_properties, THIS_MODULE, NULL, adapter_nr); if (ret == 0) { info("found Genpix USB device pID = %x (hex)", le16_to_cpu(udev->descriptor.idProduct)); } return ret;}static struct usb_device_id gp8psk_usb_table [] = { { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_COLD) }, { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_WARM) }, { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_2) }, { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_1) }, { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_CW3K) }, { 0 },};MODULE_DEVICE_TABLE(usb, gp8psk_usb_table);static struct dvb_usb_device_properties gp8psk_properties = { .usb_ctrl = CYPRESS_FX2, .firmware = "dvb-usb-gp8psk-01.fw", .num_adapters = 1, .adapter = { { .streaming_ctrl = gp8psk_streaming_ctrl, .frontend_attach = gp8psk_frontend_attach, /* parameter for the MPEG2-data transfer */ .stream = { .type = USB_BULK, .count = 7, .endpoint = 0x82, .u = { .bulk = { .buffersize = 8192, } } }, } }, .power_ctrl = gp8psk_power_ctrl, .generic_bulk_ctrl_endpoint = 0x01, .num_device_descs = 4, .devices = { { .name = "Genpix 8PSK-to-USB2 Rev.1 DVB-S receiver", .cold_ids = { &gp8psk_usb_table[0], NULL }, .warm_ids = { &gp8psk_usb_table[1], NULL }, }, { .name = "Genpix 8PSK-to-USB2 Rev.2 DVB-S receiver", .cold_ids = { NULL }, .warm_ids = { &gp8psk_usb_table[2], NULL }, }, { .name = "Genpix SkyWalker-1 DVB-S receiver", .cold_ids = { NULL }, .warm_ids = { &gp8psk_usb_table[3], NULL }, }, { .name = "Genpix SkyWalker-CW3K DVB-S receiver", .cold_ids = { NULL }, .warm_ids = { &gp8psk_usb_table[4], NULL }, }, { NULL }, }};/* usb specific object needed to register this driver with the usb subsystem */static struct usb_driver gp8psk_usb_driver = { .name = "dvb_usb_gp8psk", .probe = gp8psk_usb_probe, .disconnect = dvb_usb_device_exit, .id_table = gp8psk_usb_table,};/* module stuff */static int __init gp8psk_usb_module_init(void){ int result; if ((result = usb_register(&gp8psk_usb_driver))) { err("usb_register failed. (%d)",result); return result; } return 0;}static void __exit gp8psk_usb_module_exit(void){ /* deregister this driver from the USB subsystem */ usb_deregister(&gp8psk_usb_driver);}module_init(gp8psk_usb_module_init);module_exit(gp8psk_usb_module_exit);MODULE_AUTHOR("Alan Nisota <alannisota@gamil.com>");MODULE_DESCRIPTION("Driver for Genpix 8psk-to-USB2 DVB-S");MODULE_VERSION("1.1");MODULE_LICENSE("GPL");
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -