⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 opera1.c

📁 trident tm5600的linux驱动
💻 C
字号:
/* DVB USB framework compliant Linux driver for the Opera1 DVB-S Card** Copyright (C) 2006 Mario Hlawitschka (dh1pa@amsat.org)* Copyright (C) 2006 Marco Gittler (g.marco@freenet.de)**	This program is free software; you can redistribute it and/or modify it*	under the terms of the GNU General Public License as published by the Free*	Software Foundation, version 2.** see Documentation/dvb/README.dvb-usb for more information*/#define DVB_USB_LOG_PREFIX "opera"#include "dvb-usb.h"#include "stv0299.h"#define OPERA_READ_MSG 0#define OPERA_WRITE_MSG 1#define OPERA_I2C_TUNER 0xd1#define READ_FX2_REG_REQ  0xba#define READ_MAC_ADDR 0x08#define OPERA_WRITE_FX2 0xbb#define OPERA_TUNER_REQ 0xb1#define REG_1F_SYMBOLRATE_BYTE0 0x1f#define REG_20_SYMBOLRATE_BYTE1 0x20#define REG_21_SYMBOLRATE_BYTE2 0x21#define ADDR_B600_VOLTAGE_13V (0x02)#define ADDR_B601_VOLTAGE_18V (0x03)#define ADDR_B1A6_STREAM_CTRL (0x04)#define ADDR_B880_READ_REMOTE (0x05)struct opera1_state {	u32 last_key_pressed;};struct opera_rc_keys {	u32 keycode;	u32 event;};static int dvb_usb_opera1_debug;module_param_named(debug, dvb_usb_opera1_debug, int, 0644);MODULE_PARM_DESC(debug,		 "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64 (or-able))."		 DVB_USB_DEBUG_STATUS);DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);#if 0struct mutex mymutex;#endifstatic int opera1_xilinx_rw(struct usb_device *dev, u8 request, u16 value,			    u8 * data, u16 len, int flags){	int ret;	u8 r;	u8 u8buf[len];	unsigned int pipe = (flags == OPERA_READ_MSG) ?		usb_rcvctrlpipe(dev,0) : usb_sndctrlpipe(dev, 0);	u8 request_type = (flags == OPERA_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT;#if 0	if (mutex_lock_interruptible(&mymutex)) {		return -EAGAIN;	}#endif	if (flags == OPERA_WRITE_MSG)		memcpy(u8buf, data, len);	ret =		usb_control_msg(dev, pipe, request, request_type | USB_TYPE_VENDOR,			value, 0x0, u8buf, len, 2000);	if (request == OPERA_TUNER_REQ) {		if (usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),				OPERA_TUNER_REQ, USB_DIR_IN | USB_TYPE_VENDOR,				0x01, 0x0, &r, 1, 2000)<1 || r!=0x08)					return 0;	}	if (flags == OPERA_READ_MSG)		memcpy(data, u8buf, len);#if 0	mutex_unlock(&mymutex);#endif	return ret;}/* I2C */static int opera1_usb_i2c_msgxfer(struct dvb_usb_device *dev, u16 addr,				  u8 * buf, u16 len){	int ret = 0;	u8 request;	u16 value;	if (!dev) {		info("no usb_device");		return -EINVAL;	}	if (mutex_lock_interruptible(&dev->usb_mutex) < 0)		return -EAGAIN;	switch (addr>>1){		case ADDR_B600_VOLTAGE_13V:			request=0xb6;			value=0x00;			break;		case ADDR_B601_VOLTAGE_18V:			request=0xb6;			value=0x01;			break;		case ADDR_B1A6_STREAM_CTRL:			request=0xb1;			value=0xa6;			break;		case ADDR_B880_READ_REMOTE:			request=0xb8;			value=0x80;			break;		default:			request=0xb1;			value=addr;	}	ret = opera1_xilinx_rw(dev->udev, request,		value, buf, len,		addr&0x01?OPERA_READ_MSG:OPERA_WRITE_MSG);	mutex_unlock(&dev->usb_mutex);	return ret;}static int opera1_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],			   int num){	struct dvb_usb_device *d = i2c_get_adapdata(adap);	int i = 0, tmp = 0;	if (!d)		return -ENODEV;	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)		return -EAGAIN;	for (i = 0; i < num; i++) {		if ((tmp = opera1_usb_i2c_msgxfer(d,					(msg[i].addr<<1)|(msg[i].flags&I2C_M_RD?0x01:0),					msg[i].buf,					msg[i].len					)!= msg[i].len)) {			break;		}		if (dvb_usb_opera1_debug & 0x10)			info("sending i2c mesage %d %d", tmp, msg[i].len);	}	mutex_unlock(&d->i2c_mutex);	return num;}static u32 opera1_i2c_func(struct i2c_adapter *adapter){	return I2C_FUNC_I2C;}static struct i2c_algorithm opera1_i2c_algo = {	.master_xfer = opera1_i2c_xfer,	.functionality = opera1_i2c_func,};static int opera1_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage){	static u8 command_13v[1]={0x00};	static u8 command_18v[1]={0x01};	struct i2c_msg msg[] = {		{.addr = ADDR_B600_VOLTAGE_13V,.flags = 0,.buf = command_13v,.len = 1},	};	struct dvb_usb_adapter *udev_adap =	    (struct dvb_usb_adapter *)(fe->dvb->priv);	if (voltage == SEC_VOLTAGE_18) {		msg[0].addr = ADDR_B601_VOLTAGE_18V;		msg[0].buf = command_18v;	}	i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1);	return 0;}static int opera1_stv0299_set_symbol_rate(struct dvb_frontend *fe, u32 srate,					  u32 ratio){	stv0299_writereg(fe, 0x13, 0x98);	stv0299_writereg(fe, 0x14, 0x95);	stv0299_writereg(fe, REG_1F_SYMBOLRATE_BYTE0, (ratio >> 16) & 0xff);	stv0299_writereg(fe, REG_20_SYMBOLRATE_BYTE1, (ratio >> 8) & 0xff);	stv0299_writereg(fe, REG_21_SYMBOLRATE_BYTE2, (ratio) & 0xf0);	return 0;}static u8 opera1_inittab[] = {	0x00, 0xa1,	0x01, 0x15,	0x02, 0x00,	0x03, 0x00,	0x04, 0x7d,	0x05, 0x05,	0x06, 0x02,	0x07, 0x00,	0x0b, 0x00,	0x0c, 0x01,	0x0d, 0x81,	0x0e, 0x44,	0x0f, 0x19,	0x10, 0x3f,	0x11, 0x84,	0x12, 0xda,	0x13, 0x98,	0x14, 0x95,	0x15, 0xc9,	0x16, 0xeb,	0x17, 0x00,	0x18, 0x19,	0x19, 0x8b,	0x1a, 0x00,	0x1b, 0x82,	0x1c, 0x7f,	0x1d, 0x00,	0x1e, 0x00,	REG_1F_SYMBOLRATE_BYTE0, 0x06,	REG_20_SYMBOLRATE_BYTE1, 0x50,	REG_21_SYMBOLRATE_BYTE2, 0x10,	0x22, 0x00,	0x23, 0x00,	0x24, 0x37,	0x25, 0xbc,	0x26, 0x00,	0x27, 0x00,	0x28, 0x00,	0x29, 0x1e,	0x2a, 0x14,	0x2b, 0x1f,	0x2c, 0x09,	0x2d, 0x0a,	0x2e, 0x00,	0x2f, 0x00,	0x30, 0x00,	0x31, 0x1f,	0x32, 0x19,	0x33, 0xfc,	0x34, 0x13,	0xff, 0xff,};static struct stv0299_config opera1_stv0299_config = {	.demod_address = 0xd0>>1,	.min_delay_ms = 100,	.mclk = 88000000UL,	.invert = 1,	.skip_reinit = 0,	.lock_output = STV0299_LOCKOUTPUT_0,	.volt13_op0_op1 = STV0299_VOLT13_OP0,	.inittab = opera1_inittab,	.set_symbol_rate = opera1_stv0299_set_symbol_rate,};static int opera1_frontend_attach(struct dvb_usb_adapter *d){	if ((d->fe =	     dvb_attach(stv0299_attach, &opera1_stv0299_config,			&d->dev->i2c_adap)) != NULL) {		d->fe->ops.set_voltage = opera1_set_voltage;		return 0;	}	info("not attached stv0299");	return -EIO;}static int opera1_tuner_attach(struct dvb_usb_adapter *adap){	dvb_attach(		dvb_pll_attach, adap->fe, 0xc0>>1,		&adap->dev->i2c_adap, DVB_PLL_OPERA1	);	return 0;}static int opera1_power_ctrl(struct dvb_usb_device *d, int onoff){	u8 val = onoff ? 0x01 : 0x00;	if (dvb_usb_opera1_debug)		info("power %s", onoff ? "on" : "off");	return opera1_xilinx_rw(d->udev, 0xb7, val,				&val, 1, OPERA_WRITE_MSG);}static int opera1_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff){	static u8 buf_start[2] = { 0xff, 0x03 };	static u8 buf_stop[2] = { 0xff, 0x00 };	struct i2c_msg start_tuner[] = {		{.addr = ADDR_B1A6_STREAM_CTRL,.buf = onoff ? buf_start : buf_stop,.len = 2},	};	if (dvb_usb_opera1_debug)		info("streaming %s", onoff ? "on" : "off");	i2c_transfer(&adap->dev->i2c_adap, start_tuner, 1);	return 0;}static int opera1_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,			     int onoff){	u8 b_pid[3];	struct i2c_msg msg[] = {		{.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3},	};	if (dvb_usb_opera1_debug)		info("pidfilter index: %d pid: %d %s", index, pid,			onoff ? "on" : "off");	b_pid[0] = (2 * index) + 4;	b_pid[1] = onoff ? (pid & 0xff) : (0x00);	b_pid[2] = onoff ? ((pid >> 8) & 0xff) : (0x00);	i2c_transfer(&adap->dev->i2c_adap, msg, 1);	return 0;}static int opera1_pid_filter_control(struct dvb_usb_adapter *adap, int onoff){	int u = 0x04;	u8 b_pid[3];	struct i2c_msg msg[] = {		{.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3},	};	if (dvb_usb_opera1_debug)		info("%s hw-pidfilter", onoff ? "enable" : "disable");	for (; u < 0x7e; u += 2) {		b_pid[0] = u;		b_pid[1] = 0;		b_pid[2] = 0x80;		i2c_transfer(&adap->dev->i2c_adap, msg, 1);	}	return 0;}static struct dvb_usb_rc_key opera1_rc_keys[] = {	{0x5f, 0xa0, KEY_1},	{0x51, 0xaf, KEY_2},	{0x5d, 0xa2, KEY_3},	{0x41, 0xbe, KEY_4},	{0x0b, 0xf5, KEY_5},	{0x43, 0xbd, KEY_6},	{0x47, 0xb8, KEY_7},	{0x49, 0xb6, KEY_8},	{0x05, 0xfa, KEY_9},	{0x45, 0xba, KEY_0},	{0x09, 0xf6, KEY_UP},	/*chanup */	{0x1b, 0xe5, KEY_DOWN},	/*chandown */	{0x5d, 0xa3, KEY_LEFT},	/*voldown */	{0x5f, 0xa1, KEY_RIGHT},	/*volup */	{0x07, 0xf8, KEY_SPACE},	/*tab */	{0x1f, 0xe1, KEY_ENTER},	/*play ok */	{0x1b, 0xe4, KEY_Z},	/*zoom */	{0x59, 0xa6, KEY_M},	/*mute */	{0x5b, 0xa5, KEY_F},	/*tv/f */	{0x19, 0xe7, KEY_R},	/*rec */	{0x01, 0xfe, KEY_S},	/*Stop */	{0x03, 0xfd, KEY_P},	/*pause */	{0x03, 0xfc, KEY_W},	/*<- -> */	{0x07, 0xf9, KEY_C},	/*capture */	{0x47, 0xb9, KEY_Q},	/*exit */	{0x43, 0xbc, KEY_O},	/*power */};static int opera1_rc_query(struct dvb_usb_device *dev, u32 * event, int *state){	struct opera1_state *opst = dev->priv;	u8 rcbuffer[32];	const u16 startmarker1 = 0x10ed;	const u16 startmarker2 = 0x11ec;	struct i2c_msg read_remote[] = {		{.addr = ADDR_B880_READ_REMOTE,.buf = rcbuffer,.flags = I2C_M_RD,.len = 32},	};	int i = 0;	u32 send_key = 0;	if (i2c_transfer(&dev->i2c_adap, read_remote, 1) == 1) {		for (i = 0; i < 32; i++) {			if (rcbuffer[i])				send_key |= 1;			if (i < 31)				send_key = send_key << 1;		}		if (send_key & 0x8000)			send_key = (send_key << 1) | (send_key >> 15 & 0x01);		if (send_key == 0xffff && opst->last_key_pressed != 0) {			*state = REMOTE_KEY_REPEAT;			*event = opst->last_key_pressed;			return 0;		}		for (; send_key != 0;) {			if (send_key >> 16 == startmarker2) {				break;			} else if (send_key >> 16 == startmarker1) {				send_key =					(send_key & 0xfffeffff) | (startmarker1 << 16);				break;			} else				send_key >>= 1;		}		if (send_key == 0)			return 0;		send_key = (send_key & 0xffff) | 0x0100;		for (i = 0; i < ARRAY_SIZE(opera1_rc_keys); i++) {			if ((opera1_rc_keys[i].custom * 256 +					opera1_rc_keys[i].data) == (send_key & 0xffff)) {				*state = REMOTE_KEY_PRESSED;				*event = opera1_rc_keys[i].event;				opst->last_key_pressed =					opera1_rc_keys[i].event;				break;			}			opst->last_key_pressed = 0;		}	} else		*state = REMOTE_NO_KEY_PRESSED;	return 0;}static struct usb_device_id opera1_table[] = {	{USB_DEVICE(USB_VID_CYPRESS, USB_PID_OPERA1_COLD)},	{USB_DEVICE(USB_VID_OPERA1, USB_PID_OPERA1_WARM)},	{}};MODULE_DEVICE_TABLE(usb, opera1_table);static int opera1_read_mac_address(struct dvb_usb_device *d, u8 mac[6]){	u8 command[] = { READ_MAC_ADDR };	opera1_xilinx_rw(d->udev, 0xb1, 0xa0, command, 1, OPERA_WRITE_MSG);	opera1_xilinx_rw(d->udev, 0xb1, 0xa1, mac, 6, OPERA_READ_MSG);	return 0;}static int opera1_xilinx_load_firmware(struct usb_device *dev,				       const char *filename){	const struct firmware *fw = NULL;	u8 *b, *p;	int ret = 0, i,fpgasize=40;	u8 testval;	info("start downloading fpga firmware %s",filename);	if ((ret = request_firmware(&fw, filename, &dev->dev)) != 0) {		err("did not find the firmware file. (%s) "			"Please see linux/Documentation/dvb/ for more details on firmware-problems.",			filename);		return ret;	} else {		p = kmalloc(fw->size, GFP_KERNEL);		opera1_xilinx_rw(dev, 0xbc, 0x00, &testval, 1, OPERA_READ_MSG);		if (p != NULL && testval != 0x67) {			u8 reset = 0, fpga_command = 0;			memcpy(p, fw->data, fw->size);			/* clear fpga ? */			opera1_xilinx_rw(dev, 0xbc, 0xaa, &fpga_command, 1,					 OPERA_WRITE_MSG);			for (i = 0; i < fw->size;) {				if ( (fw->size - i) <fpgasize){				    fpgasize=fw->size-i;				}				b = (u8 *) p + i;				if (opera1_xilinx_rw					(dev, OPERA_WRITE_FX2, 0x0, b , fpgasize,						OPERA_WRITE_MSG) != fpgasize					) {					err("error while transferring firmware");					ret = -EINVAL;					break;				}				i = i + fpgasize;			}			/* restart the CPU */			if (ret || opera1_xilinx_rw					(dev, 0xa0, 0xe600, &reset, 1,					OPERA_WRITE_MSG) != 1) {				err("could not restart the USB controller CPU.");				ret = -EINVAL;			}		}	}	kfree(p);	if (fw) {		release_firmware(fw);	}	return ret;}static struct dvb_usb_device_properties opera1_properties = {	.caps = DVB_USB_IS_AN_I2C_ADAPTER,	.usb_ctrl = CYPRESS_FX2,	.firmware = "dvb-usb-opera-01.fw",	.size_of_priv = sizeof(struct opera1_state),	.power_ctrl = opera1_power_ctrl,	.i2c_algo = &opera1_i2c_algo,	.rc_key_map = opera1_rc_keys,	.rc_key_map_size = ARRAY_SIZE(opera1_rc_keys),	.rc_interval = 200,	.rc_query = opera1_rc_query,	.read_mac_address = opera1_read_mac_address,	.generic_bulk_ctrl_endpoint = 0x00,	/* parameter for the MPEG2-data transfer */	.num_adapters = 1,	.adapter = {		{			.frontend_attach = opera1_frontend_attach,			.streaming_ctrl = opera1_streaming_ctrl,			.tuner_attach = opera1_tuner_attach,			.caps =				DVB_USB_ADAP_HAS_PID_FILTER |				DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,			.pid_filter = opera1_pid_filter,			.pid_filter_ctrl = opera1_pid_filter_control,			.pid_filter_count = 252,			.stream = {				.type = USB_BULK,				.count = 10,				.endpoint = 0x82,				.u = {					.bulk = {						.buffersize = 4096,					}				}			},		}	},	.num_device_descs = 1,	.devices = {		{"Opera1 DVB-S USB2.0",			{&opera1_table[0], NULL},			{&opera1_table[1], NULL},		},	}};static int opera1_probe(struct usb_interface *intf,			const struct usb_device_id *id){	struct usb_device *udev = interface_to_usbdev(intf);	if (udev->descriptor.idProduct == USB_PID_OPERA1_WARM &&		udev->descriptor.idVendor == USB_VID_OPERA1 &&		opera1_xilinx_load_firmware(udev, "dvb-usb-opera1-fpga-01.fw") != 0	    ) {		return -EINVAL;	}	if (0 != dvb_usb_device_init(intf, &opera1_properties,				     THIS_MODULE, NULL, adapter_nr))		return -EINVAL;	return 0;}static struct usb_driver opera1_driver = {	.name = "opera1",	.probe = opera1_probe,	.disconnect = dvb_usb_device_exit,	.id_table = opera1_table,};static int __init opera1_module_init(void){	int result = 0;#if 0	mutex_init(&mymutex);#endif	if ((result = usb_register(&opera1_driver))) {		err("usb_register failed. Error number %d", result);	}	return result;}static void __exit opera1_module_exit(void){	usb_deregister(&opera1_driver);}module_init(opera1_module_init);module_exit(opera1_module_exit);MODULE_AUTHOR("Mario Hlawitschka (c) dh1pa@amsat.org");MODULE_AUTHOR("Marco Gittler (c) g.marco@freenet.de");MODULE_DESCRIPTION("Driver for Opera1 DVB-S device");MODULE_VERSION("0.1");MODULE_LICENSE("GPL");

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -