connect.c

TP Link 321 Linux Driver

	}	 
}

/*
	==========================================================================
	Description:
	==========================================================================
*/
VOID CntlWaitAssocProc(
	IN PRTMP_ADAPTER pAd, 
	IN MLME_QUEUE_ELEM *Elem) 
{
	USHORT		Reason;

	if (Elem->MsgType == MT2_ASSOC_CONF) 
	{
		NdisMoveMemory(&Reason, Elem->Msg, sizeof(USHORT));
		if (Reason == MLME_SUCCESS) 
		{
			LinkUp(pAd, BSS_INFRA);
			pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
			DBGPRINT(RT_DEBUG_TRACE, "CNTL - Association successful on BSS #%d\n",pAd->MlmeAux.BssIdx);
		} 
		else 
		{
			// not success, try next BSS
			DBGPRINT(RT_DEBUG_TRACE, "CNTL - Association fails on BSS #%d\n",pAd->MlmeAux.BssIdx);
			pAd->MlmeAux.BssIdx++;
			IterateOnBssTab(pAd);
		}
	}
}

/*
	==========================================================================
	Description:
	==========================================================================
*/
VOID CntlWaitReassocProc(
	IN PRTMP_ADAPTER pAd, 
	IN MLME_QUEUE_ELEM *Elem) 
{
	USHORT		Result;

	if (Elem->MsgType == MT2_REASSOC_CONF) 
	{
		NdisMoveMemory(&Result, Elem->Msg, sizeof(USHORT));
		if (Result == MLME_SUCCESS) 
		{
			// 
			// NDIS requires a new Link UP indication but no Link Down for RE-ASSOC
			//
			LinkUp(pAd, BSS_INFRA);
			
			pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;			
			DBGPRINT(RT_DEBUG_TRACE, "CNTL - Re-assocition successful on BSS #%d\n", pAd->MlmeAux.RoamIdx);
		} 
		else 
		{
			// reassoc failed, try to pick next BSS in the BSS Table
			DBGPRINT(RT_DEBUG_TRACE, "CNTL - Re-assocition fails on BSS #%d\n", pAd->MlmeAux.RoamIdx);
			pAd->MlmeAux.RoamIdx++;
			IterateOnBssTab2(pAd);
		}
	}
}

/*
	==========================================================================
	Description:
	==========================================================================
*/
VOID LinkUp(
	IN PRTMP_ADAPTER pAd,
	IN UCHAR BssType) 
{
	ULONG	Now;
	BOOLEAN	Cancelled;
	TXRX_CSR4_STRUC NewTxRxCsr4, CurTxRxCsr4;

	//
	// ASSOC - DisassocTimeoutAction
	// CNTL - Dis-associate successful
	// !!! LINK DOWN !!!
	// [88888] OID_802_11_SSID should have returned NDTEST_WEP_AP2(Returned: )
	// 
	// To prevent DisassocTimeoutAction to call Link down after we link up,
	// cancel the DisassocTimer no matter what it start or not.
	//
	RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer,  &Cancelled);

	COPY_SETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(pAd);
	DBGPRINT(RT_DEBUG_TRACE, "!!! LINK UP !!! (Infra=%d, AID=%d, ssid=%s)\n", 
		BssType, pAd->ActiveCfg.Aid, pAd->PortCfg.Ssid);

	
	if (BssType == BSS_ADHOC)
	{
		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_ADHOC_ON);
		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_INFRA_ON);
		AsicSetBssid(pAd, pAd->PortCfg.Bssid);
	}
	else
	{
		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_INFRA_ON);
		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_ADHOC_ON);
	

			AsicSetBssid(pAd, pAd->PortCfg.Bssid);
	}
	
	AsicSetSlotTime(pAd, (BOOLEAN)pAd->PortCfg.UseShortSlotTime);
	AsicSetEdcaParm(pAd, &pAd->PortCfg.APEdcaParm);
	
	MlmeUpdateTxRates(pAd, TRUE);
	NdisZeroMemory(&pAd->DrsCounters, sizeof(COUNTER_DRS));

	Now = jiffies;
	pAd->PortCfg.LastBeaconRxTime = Now;   // last RX timestamp
	
	if ((pAd->PortCfg.TxPreamble != Rt802_11PreambleLong) &&
		CAP_IS_SHORT_PREAMBLE_ON(pAd->ActiveCfg.CapabilityInfo))
	{

		DBGPRINT(RT_DEBUG_INFO, "CNTL - !!! Set to short preamble!!!\n");
		MlmeSetTxPreamble(pAd, Rt802_11PreambleShort);
	}
	
	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED);

 	if (pAd->PortCfg.RadarDetect.RDMode == RD_SILENCE_MODE)
    {
		RadarDetectionStop(pAd);
    }
	pAd->PortCfg.RadarDetect.RDMode = RD_NORMAL_MODE;

	if (BssType == BSS_ADHOC)
	{
		//
		// We also need to cancel the LinkDownTimer, no matter it was been set or not.
		// It may be set when we start an Infrastructure mode.
		// And not be canceled yet then we switch to Adohc at meanwhile.
		//
		RTMPCancelTimer(&pAd->Mlme.LinkDownTimer, &Cancelled);

		MakeIbssBeacon(pAd);

        if (((pAd->PortCfg.PhyMode == PHY_11A) || (pAd->PortCfg.PhyMode == PHY_11ABG_MIXED))&& (pAd->PortCfg.bIEEE80211H == 1) && RadarChannelCheck(pAd, pAd->PortCfg.Channel))
        {
			;; //Do nothing
        }
		else
        {
            AsicEnableIbssSync(pAd);
        }

	
#ifdef	SINGLE_ADHOC_LINKUP
		// Although this did not follow microsoft's recommendation.
		//Change based on customer's request
		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
#endif

#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
				// collect associate info and notify the wpa_supplicant. 
				if (pAd->PortCfg.bNativeWpa == TRUE)  // add by johnli
					wext_notify_event_assoc(pAd, SIOCGIWAP, TRUE);
#endif // NATIVE_WPA_SUPPLICANT_SUPPORT

	}
	else // BSS_INFRA
	{		
		// First cancel linkdown timer
		RTMPCancelTimer(&pAd->Mlme.LinkDownTimer, &Cancelled);

		// Check the new SSID with last SSID
		if (Cancelled)
		{
			if ((pAd->PortCfg.LastSsidLen != pAd->PortCfg.SsidLen) || 
				((pAd->PortCfg.LastSsidLen == pAd->PortCfg.SsidLen) &&
				 (RTMPCompareMemory(pAd->PortCfg.LastSsid, pAd->PortCfg.Ssid, pAd->PortCfg.LastSsidLen) != 0)))
			{
				// Send link down event before set to link up
				DBGPRINT(RT_DEBUG_TRACE, "NDIS_STATUS_MEDIA_DISCONNECT Event AA!\n");
			}
		}
		
		//
		// On WPA mode, Remove All Keys if not connect to the last BSSID
		// Key will be set after 4-way handshake.
		//
		if ((pAd->PortCfg.AuthMode >= Ndis802_11AuthModeWPA) &&
			(!RTMPEqualMemory(pAd->PortCfg.LastBssid, pAd->PortCfg.Bssid, MAC_ADDR_LEN)))
		{	
			// Remove all WPA keys
			RTMPWPARemoveAllKeys(pAd);		
			pAd->PortCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
		}
		// store Bssid
		COPY_MAC_ADDR(pAd->PortCfg.LastBssid, pAd->PortCfg.Bssid); 

		
		// NOTE:
		// the decision of using "short slot time" or not may change dynamically due to
		// new STA association to the AP. so we have to decide that upon parsing BEACON, not here

		// NOTE:
		// the decision to use "RTC/CTS" or "CTS-to-self" protection or not may change dynamically
		// due to new STA association to the AP. so we have to decide that upon parsing BEACON, not here
		
		ComposePsPoll(pAd);
		ComposeNullFrame(pAd);		
		AsicEnableBssSync(pAd);
	
		// only INFRASTRUCTURE mode need to indicate connectivity immediately; ADHOC mode
		// should wait until at least 2 active nodes in this BSSID.
		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);

		if (pAd->PortCfg.bAggregationCapable && (pAd->MlmeAux.APRalinkIe & 0x00000001))
			OPSTATUS_SET_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED);
	}

	DBGPRINT(RT_DEBUG_TRACE, "NDIS_STATUS_MEDIA_CONNECT Event B!\n");

	// Set LED
	RTMPSetLED(pAd, LED_LINK_UP);

	//
	// Enable OFDM TX rate auto fallback to CCK, if need.
	//
	RTUSBReadMACRegister(pAd, TXRX_CSR4, &CurTxRxCsr4.word);
	NewTxRxCsr4.word = CurTxRxCsr4.word;
	if ((pAd->PortCfg.Channel <= 14) && 
		((pAd->PortCfg.PhyMode == PHY_11B) ||
		 (pAd->PortCfg.PhyMode == PHY_11BG_MIXED) ||
		 (pAd->PortCfg.PhyMode == PHY_11ABG_MIXED)))
	{
		NewTxRxCsr4.field.OfdmTxFallbacktoCCK = 1;	 //Enable OFDM TX rate auto fallback to CCK 1M, 2M
	}
	else
	{
		NewTxRxCsr4.field.OfdmTxFallbacktoCCK = 0;	 //Disable OFDM TX rate auto fallback to CCK 1M, 2M	
	}

	if (NewTxRxCsr4.word!= CurTxRxCsr4.word)
		RTUSBWriteMACRegister(pAd, TXRX_CSR4, NewTxRxCsr4.word);

		
	pAd->Mlme.PeriodicRound = 0;		// re-schedule MlmePeriodicExec()
	pAd->bConfigChanged = FALSE;		// Reset config flag
	pAd->ExtraInfo = GENERAL_LINK_UP;	// Update extra information to link is up

}

/*
	==========================================================================

	Routine	Description:
		Disconnect current BSSID

	Arguments:
		pAd				- Pointer to our adapter
		IsReqFromAP		- Request from AP
		
	Return Value:		
		None

	Note:
		We need more information to know it's this requst from AP.
		If yes! we need to do extra handling, for example, remove the WPA key.
		Otherwise on 4-way handshaking will faied, since the WPA key didn't be
		remove while auto reconnect.
		Disconnect request from AP, it means we will start afresh 4-way handshaking 
		on WPA mode.

	==========================================================================
*/
VOID LinkDown(
	IN PRTMP_ADAPTER pAd,
	IN	BOOLEAN 	 IsReqFromAP)
{
	TXRX_CSR4_STRUC CurTxRxCsr4;

	DBGPRINT(RT_DEBUG_TRACE, "!!! LINK DOWN !!!\n");

	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED);

	if (ADHOC_ON(pAd))		// Adhoc mode link down
	{	
		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_ADHOC_ON);
		
#ifdef	SINGLE_ADHOC_LINKUP
		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
		// clean up previous SCAN result, add current BSS back to table if any
		BssTableDeleteEntry(&pAd->ScanTab, &(pAd->PortCfg.Bssid), pAd->PortCfg.Channel);
#else
		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))
		{
			OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
			BssTableDeleteEntry(&pAd->ScanTab, pAd->PortCfg.Bssid, pAd->PortCfg.Channel);
		}
#endif	

#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT				
			if (pAd->PortCfg.bNativeWpa == TRUE)  // add by johnli
				wext_notify_event_assoc(pAd, SIOCGIWAP, FALSE);
#endif // NATIVE_WPA_SUPPLICANT_SUPPORT

	}
	else					// Infra structure mode
	{		
		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_INFRA_ON); 
		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED); 
		// Saved last SSID for linkup comparison
		pAd->PortCfg.LastSsidLen = pAd->PortCfg.SsidLen;
		NdisMoveMemory(pAd->PortCfg.LastSsid, pAd->PortCfg.Ssid, pAd->PortCfg.LastSsidLen);
		COPY_MAC_ADDR(pAd->PortCfg.LastBssid, pAd->PortCfg.Bssid);
		if (pAd->MlmeAux.CurrReqIsFromNdis == TRUE)
		{ 
			DBGPRINT(RT_DEBUG_TRACE, "NDIS_STATUS_MEDIA_DISCONNECT Event A!\n");
			pAd->MlmeAux.CurrReqIsFromNdis = FALSE;
		}
		else
		{
			// Set linkdown timer
			RTMPSetTimer(&pAd->Mlme.LinkDownTimer, 10000);
					
			//
			// If disassociation request is from NDIS, then we don't need to delete BSSID frmo entry.
			// Otherwise lost beacon or receive De-Authentication from AP, 
			// then we should delete BSSID from BssTable.
			// If we don't delete from entry, roaming will fail.
			//
			BssTableDeleteEntry(&pAd->ScanTab, pAd->PortCfg.Bssid, pAd->PortCfg.Channel);

		}
				
		// restore back to - 
		//		1. long slot (20 us) or short slot (9 us) time
		//		2. turn on/off RTS/CTS and/or CTS-to-self protection
		//		3. short preamble
		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_BG_PROTECTION_INUSED);

	}

	//
	// Reset CWMin & CWMax to default value
	// Since we reset the slot time to 0x14(long slot time), so we also need to  
	// Reset the flag fOP_STATUS_SHORT_SLOT_INUSED at the same time.
	// 
	RTUSBWriteMACRegister(pAd, MAC_CSR9, 0x0704a414);
	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_SLOT_INUSED);
	
	AsicSetSlotTime(pAd, (BOOLEAN)pAd->PortCfg.UseShortSlotTime);
	AsicSetEdcaParm(pAd, NULL);
	
	// Set LED
	RTMPSetLED(pAd, LED_LINK_DOWN);

	AsicDisableSync(pAd);	
	pAd->Mlme.PeriodicRound = 0;

	// Remove PortCfg Information after link down
	NdisZeroMemory(pAd->PortCfg.Bssid, MAC_ADDR_LEN);
	NdisZeroMemory(pAd->PortCfg.Ssid, MAX_LEN_OF_SSID);
	pAd->PortCfg.SsidLen = 0;
	
	// Reset WPA-PSK state. Only reset when supplicant enabled
	if (pAd->PortCfg.WpaState != SS_NOTUSE)
	{
		pAd->PortCfg.WpaState = SS_START;
		// Clear Replay counter
		NdisZeroMemory(pAd->PortCfg.ReplayCounter, 8);
	}
	
	//
	// if link down come from AP, we need to remove all WPA keys on WPA mode.
	// otherwise will cause 4-way handshaking failed, since the WPA key not empty.
	//
	if ((IsReqFromAP) && (pAd->PortCfg.AuthMode >= Ndis802_11AuthModeWPA))
	{	
		// Remove all WPA keys
		RTMPWPARemoveAllKeys(pAd);
	}	
	
	// 802.1x port control
	pAd->PortCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
	pAd->PortCfg.MicErrCnt = 0;

	// Update extra information to link is up
	pAd->ExtraInfo = GENERAL_LINK_DOWN;
 
	// Clean association information
	NdisZeroMemory(&pAd->PortCfg.AssocInfo, sizeof(NDIS_802_11_ASSOCIATION_INFORMATION));
	pAd->PortCfg.AssocInfo.Length = sizeof(NDIS_802_11_ASSOCIATION_INFORMATION);
	pAd->PortCfg.ReqVarIELen = 0;
	pAd->PortCfg.ResVarIELen = 0;


    // Restore MlmeRate
	pAd->PortCfg.MlmeRate = pAd->PortCfg.BasicMlmeRate;
	pAd->PortCfg.RtsRate = pAd->PortCfg.BasicMlmeRate;

	//
	// After link down, reset R17 to LowerBound.
	//
	if (pAd->MlmeAux.Channel <= 14)
	{
		RTUSBWriteBBPRegister(pAd, 17, pAd->BbpTuning.R17LowerBoundG);
	}
	else
	{
		RTUSBWriteBBPRegister(pAd, 17, pAd->BbpTuning.R17LowerBoundA);		  
	}

	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MAX_RETRY_ENABLED))
	{
		RTUSBReadMACRegister(pAd, TXRX_CSR4, &CurTxRxCsr4.word);
		CurTxRxCsr4.field.ShortRetryLimit = 0x07;