16tft.map

STM8-触摸例程

_TSL_SCKey_SetErrorState                   2   (2)
_TSL_SCKey_SetIdleState                    4   (2)
_TSL_SCKey_SetPostDetectState              2   (2)
_TSL_SCKey_SetPreDetectState               2   (2)
_TSL_SCKey_SetPreRecalibrationState   >    2   (2)
_TSL_SetStructPointer                      2   (2)

Debug\stm8_tsl_rc_singlechannelkey.o:
_TSL_SCKEY_P1_Acquisition                 24   (2)
_TSL_SCKEY_P2_Acquisition                 24   (2)
_TSL_SCKEY_P3_Acquisition                 24   (2)
_TSL_SCKey_CalibrationTreatment            6   (2)
_TSL_SCKey_CheckDisabled                   4   (2)
_TSL_SCKey_CheckEnabled                    4   (2)
_TSL_SCKey_CheckErrorCondition             2   (2)
_TSL_SCKey_DetectedTreatment               8   (2)
_TSL_SCKey_IdleTreatment                   8   (2)
_TSL_SCKey_Init                            4   (2)
_TSL_SCKey_PostDetectTreatment             6   (2)
_TSL_SCKey_PreDetectTreatment              6   (2)
_TSL_SCKey_PreRecalibrationTreatment       4   (2)
_TSL_SCKey_Process                        10   (2)

Debug\stm8_tsl_rc_timerdriver.o:
_TSL_Timer_Adjust                     >   10   (4)
_TSL_Timer_Check_100ms_Tick                4   (2)
_TSL_Timer_Check_10ms_Tick                 6   (2)
_TSL_Timer_Check_1sec_Tick                 2   (2)
_TSL_Timer_ISR                        >   17   (11)
_TSL_Timer_Init                            2   (2)

Debug\stm8s_adc1.o:
_ADC1_AWDChannelConfig                >    4   (4)
_ADC1_ClearFlag                       >    4   (4)
_ADC1_ClearITPendingBit                    5   (5)
_ADC1_Cmd                                  2   (2)
_ADC1_ConversionConfig                     5   (5)
_ADC1_DataBufferCmd                   >    2   (2)
_ADC1_DeInit                               2   (2)
_ADC1_ExternalTriggerConfig                4   (4)
_ADC1_GetAWDChannelStatus             >    4   (4)
_ADC1_GetBufferValue                  >    8   (8)
_ADC1_GetConversionValue                   7   (7)
_ADC1_GetFlagStatus                   >    4   (4)
_ADC1_GetITStatus                     >    5   (5)
_ADC1_ITConfig                             5   (5)
_ADC1_Init                            >   15   (10)
_ADC1_PrescalerConfig                      3   (3)
_ADC1_ScanModeCmd                     >    2   (2)
_ADC1_SchmittTriggerConfig                 4   (4)
_ADC1_SetHighThreshold                >    4   (4)
_ADC1_SetLowThreshold                 >    4   (4)
_ADC1_StartConversion                      2   (2)

Debug\stm8s_clk.o:
_CLK_AdjustHSICalibrationValue        >    3   (3)
_CLK_CANConfig                        >    3   (3)
_CLK_CCOCmd                           >    2   (2)
_CLK_CCOConfig                        >    3   (3)
_CLK_ClearITPendingBit                >    2   (2)
_CLK_ClockSecuritySystemEnable        >    2   (2)
_CLK_ClockSwitchCmd                   >    2   (2)
_CLK_ClockSwitchConfig                >   10   (10)
_CLK_DeInit                           >    2   (2)
_CLK_FastHaltWakeUpCmd                >    2   (2)
_CLK_GetClockFreq                         25   (11)
_CLK_GetFlagStatus                    >    7   (7)
_CLK_GetITStatus                      >    4   (4)
_CLK_GetSYSCLKSource                  >    2   (2)
_CLK_HSECmd                           >    2   (2)
_CLK_HSICmd                           >    2   (2)
_CLK_HSIPrescalerConfig               >    3   (3)
_CLK_ITConfig                         >    4   (4)
_CLK_LSICmd                           >    2   (2)
_CLK_PeripheralClockConfig            >    4   (4)
_CLK_SWIMConfig                       >    2   (2)
_CLK_SYSCLKConfig                          3   (3)
_CLK_SYSCLKEmergencyClear             >    2   (2)
_CLK_SlowActiveHaltWakeUpCmd          >    2   (2)

Debug\stm8s_gpio.o:
_GPIO_DeInit                          >    2   (2)
_GPIO_ExternalPullUpConfig            >    6   (6)
_GPIO_Init                                 6   (6)
_GPIO_ReadInputData                   >    2   (2)
_GPIO_ReadInputPin                         5   (5)
_GPIO_ReadOutputData                  >    2   (2)
_GPIO_Write                           >    5   (5)
_GPIO_WriteHigh                            5   (5)
_GPIO_WriteLow                             5   (5)
_GPIO_WriteReverse                         5   (5)

Debug\stm8s_it.o:
_ADC_IRQHandler                       >   18   (11)
_AWU_IRQHandler                       >    5   (5)
_CAN_RX_IRQHandler                    >    5   (5)
_CAN_TX_IRQHandler                    >    5   (5)
_CLK_IRQHandler                       >    5   (5)
_EEPROM_EEC_IRQHandler                >    5   (5)
_EXTI_PORTA_IRQHandler                >    5   (5)
_EXTI_PORTB_IRQHandler                >    5   (5)
_EXTI_PORTC_IRQHandler                >    5   (5)
_EXTI_PORTD_IRQHandler                >    5   (5)
_EXTI_PORTE_IRQHandler                >    5   (5)
_I2C_IRQHandler                       >    5   (5)
_NonHandledInterrupt                  >    5   (5)
_SPI_IRQHandler                       >    5   (5)
_TIM1_CAP_COM_IRQHandler              >    5   (5)
_TIM1_UPD_OVF_TRG_BRK_IRQHandler      >   13   (11)
_TIM2_CAP_COM_IRQHandler              >    5   (5)
_TIM2_UPD_OVF_BRK_IRQHandler          >    5   (5)
_TIM3_CAP_COM_IRQHandler              >    5   (5)
_TIM3_UPD_OVF_BRK_IRQHandler          >    5   (5)
_TLI_IRQHandler                       >    5   (5)
_TRAP_IRQHandler                      >    5   (5)
_UART1_RX_IRQHandler                  >    5   (5)
_UART1_TX_IRQHandler                  >    5   (5)
_UART2_RX_IRQHandler                  >    5   (5)
_UART2_TX_IRQHandler                  >    5   (5)

Debug\stm8s_tim1.o:
L11_TI4_Config                             6   (6)
L3_TI1_Config                              6   (6)
L5_TI2_Config                              6   (6)
L7_TI3_Config                              6   (6)
_TIM1_ARRPreloadConfig                >    2   (2)
_TIM1_BDTRConfig                      >    8   (8)
_TIM1_CCPreloadControl                >    2   (2)
_TIM1_CCxCmd                          >    4   (4)
_TIM1_CCxNCmd                         >    4   (4)
_TIM1_ClearFlag                       >    4   (4)
_TIM1_ClearITPendingBit                    2   (2)
_TIM1_Cmd                                  2   (2)
_TIM1_CounterModeConfig               >    3   (3)
_TIM1_CtrlPWMOutputs                  >    2   (2)
_TIM1_DeInit                               2   (2)
_TIM1_ETRClockMode1Config             >   10   (5)
_TIM1_ETRClockMode2Config             >   10   (5)
_TIM1_ETRConfig                            5   (5)
_TIM1_EncoderInterfaceConfig          >    5   (5)
_TIM1_ForcedOC1Config                 >    3   (3)
_TIM1_ForcedOC2Config                 >    3   (3)
_TIM1_ForcedOC3Config                 >    3   (3)
_TIM1_ForcedOC4Config                 >    3   (3)
_TIM1_GenerateEvent                   >    2   (2)
_TIM1_GetCapture1                     >    6   (6)
_TIM1_GetCapture2                     >    6   (6)
_TIM1_GetCapture3                     >    6   (6)
_TIM1_GetCapture4                     >    6   (6)
_TIM1_GetCounter                      >    4   (4)
_TIM1_GetFlagStatus                   >    7   (7)
_TIM1_GetITStatus                     >    5   (5)
_TIM1_GetPrescaler                    >    4   (4)
_TIM1_ICInit                          >   13   (7)
_TIM1_ITConfig                             4   (4)
_TIM1_InternalClockConfig             >    2   (2)
_TIM1_OC1FastConfig                   >    2   (2)
_TIM1_OC1Init                         >   14   (14)
_TIM1_OC1NPolarityConfig              >    2   (2)
_TIM1_OC1PolarityConfig               >    2   (2)
_TIM1_OC1PreloadConfig                >    2   (2)
_TIM1_OC2FastConfig                   >    2   (2)
_TIM1_OC2Init                         >   14   (14)
_TIM1_OC2NPolarityConfig              >    2   (2)
_TIM1_OC2PolarityConfig               >    2   (2)
_TIM1_OC2PreloadConfig                >    2   (2)
_TIM1_OC3FastConfig                   >    2   (2)
_TIM1_OC3Init                         >   14   (14)
_TIM1_OC3NPolarityConfig              >    2   (2)
_TIM1_OC3PolarityConfig               >    2   (2)
_TIM1_OC3PreloadConfig                >    2   (2)
_TIM1_OC4FastConfig                   >    2   (2)
_TIM1_OC4Init                         >    9   (9)
_TIM1_OC4PolarityConfig               >    2   (2)
_TIM1_OC4PreloadConfig                >    2   (2)
_TIM1_PWMIConfig                      >   15   (9)
_TIM1_PrescalerConfig                 >    5   (5)
_TIM1_SelectCOM                       >    2   (2)
_TIM1_SelectHallSensor                >    2   (2)
_TIM1_SelectInputTrigger                   3   (3)
_TIM1_SelectMasterSlaveMode           >    2   (2)
_TIM1_SelectOCxM                      >    4   (4)
_TIM1_SelectOnePulseMode              >    2   (2)
_TIM1_SelectOutputTrigger             >    3   (3)
_TIM1_SelectSlaveMode                 >    3   (3)
_TIM1_SetAutoreload                   >    2   (2)
_TIM1_SetCompare1                     >    2   (2)
_TIM1_SetCompare2                     >    2   (2)
_TIM1_SetCompare3                     >    2   (2)
_TIM1_SetCompare4                     >    2   (2)
_TIM1_SetCounter                      >    2   (2)
_TIM1_SetIC1Prescaler                      3   (3)
_TIM1_SetIC2Prescaler                      3   (3)
_TIM1_SetIC3Prescaler                      3   (3)
_TIM1_SetIC4Prescaler                      3   (3)
_TIM1_TIxExternalClockConfig          >   11   (5)
_TIM1_TimeBaseInit                         8   (8)
_TIM1_UpdateDisableConfig             >    2   (2)
_TIM1_UpdateRequestConfig             >    2   (2)

Debug\stm8s_uart1.o:
_UART1_ClearFlag                      >    2   (2)
_UART1_ClearITPendingBit                   2   (2)
_UART1_Cmd                            >    2   (2)
_UART1_DeInit                              3   (3)
_UART1_GetFlagStatus                  >    5   (5)
_UART1_GetITStatus                         6   (6)
_UART1_HalfDuplexCmd                  >    2   (2)
_UART1_ITConfig                       >    7   (7)
_UART1_Init                               48   (23)
_UART1_IrDACmd                        >    2   (2)
_UART1_IrDAConfig                     >    2   (2)
_UART1_LINBreakDetectionConfig        >    2   (2)
_UART1_LINCmd                         >    2   (2)
_UART1_ReceiveData8                   >    2   (2)
_UART1_ReceiveData9                   >    4   (4)
_UART1_ReceiverWakeUpCmd              >    2   (2)
_UART1_SendBreak                      >    2   (2)
_UART1_SendData8                           2   (2)
_UART1_SendData9                      >    4   (4)
_UART1_SetAddress                     >    3   (3)
_UART1_SetGuardTime                   >    2   (2)
_UART1_SetPrescaler                   >    2   (2)
_UART1_SmartCardCmd                   >    2   (2)
_UART1_SmartCardNACKCmd               >    2   (2)
_UART1_WakeUpConfig                   >    2   (2)

Stack size: 72


                              ---------
                              Call tree
                              ---------
   1 > _ADC1_AWDChannelConfig: (4)

   2 > _ADC1_ClearFlag: (4)

   3 > _ADC1_DataBufferCmd: (2)

   4 > _ADC1_GetAWDChannelStatus: (4)

   5 > _ADC1_GetBufferValue: (8)

   6 > _ADC1_GetFlagStatus: (4)

   7 > _ADC1_GetITStatus: (5)

   8 > _ADC1_Init: (10)
   9      + _ADC1_ConversionConfig: (5)
  10      + _ADC1_ExternalTriggerConfig: (4)
  11      + _ADC1_PrescalerConfig: (3)
  12      + _ADC1_SchmittTriggerConfig: (4)
       
  13 > _ADC1_ScanModeCmd: (2)

  14 > _ADC1_SetHighThreshold: (4)

  15 > _ADC1_SetLowThreshold: (4)

  16 > _ADC_IRQHandler: (11)
  17      + _ADC1_ClearITPendingBit: (5)
  18      + _ADC1_GetConversionValue: (7)
       
  19 > _AWU_IRQHandler: (5)

  20 > _CAN_RX_IRQHandler: (5)

  21 > _CAN_TX_IRQHandler: (5)

  22 > _CLK_AdjustHSICalibrationValue: (3)

  23 > _CLK_CANConfig: (3)

  24 > _CLK_CCOCmd: (2)

  25 > _CLK_CCOConfig: (3)

  26 > _CLK_ClearITPendingBit: (2)

  27 > _CLK_ClockSecuritySystemEnable: (2)

  28 > _CLK_ClockSwitchCmd: (2)

  29 > _CLK_ClockSwitchConfig: (10)

  30 > _CLK_DeInit: (2)

  31 > _CLK_FastHaltWakeUpCmd: (2)

  32 > _CLK_GetFlagStatus: (7)

  33 > _CLK_GetITStatus: (4)

  34 > _CLK_GetSYSCLKSource: (2)

  35 > _CLK_HSECmd: (2)

  36 > _CLK_HSICmd: (2)

  37 > _CLK_HSIPrescalerConfig: (3)

  38 > _CLK_IRQHandler: (5)