overlayexamplec_ts201.mak

基于TS201 Sets up a skeleton overlay system in C

# Generated by the VisualDSP++ IDDE

# Note:  Any changes made to this Makefile will be lost the next time the
# matching project file is loaded into the IDDE.  If you wish to preserve
# changes, rename this file and run it externally to the IDDE.

# The syntax of this Makefile is such that GNU Make v3.77 or higher is
# required.

# The current working directory should be the directory in which this
# Makefile resides.

# Supported targets:
#     OverlayExampleC_TS201_Debug
#     OverlayExampleC_TS201_Debug_clean

# Define this variable if you wish to run this Makefile on a host
# other than the host that created it and VisualDSP++ may be installed
# in a different directory.

ADI_DSP=E:\Analog Devices\VisualDSP 4.5


# $VDSP is a gmake-friendly version of ADI_DIR

empty:=
space:= $(empty) $(empty)
VDSP_INTERMEDIATE=$(subst \,/,$(ADI_DSP))
VDSP=$(subst $(space),\$(space),$(VDSP_INTERMEDIATE))

RM=cmd /C del /F /Q

#
# Begin "OverlayExampleC_TS201_Debug" configuration
#

ifeq ($(MAKECMDGOALS),OverlayExampleC_TS201_Debug)

OverlayExampleC_TS201_Debug : ./Debug/DSPA.dxe ./Debug/DSPB.dxe ./Debug/_funct1.ovl ./Debug/_funct2.ovl ./Debug/_funct3.ovl ./Debug/_funct4.ovl 

./Debug/DMAInt.doj :DMAInt.c 
	@echo ".\DMAInt.c"
	$(VDSP)/ccts.exe -c .\DMAInt.c -file-attr ProjectName=OverlayExampleC_TS201 -O -Ov100 -g -structs-do-not-overlap -no-multiline -I . -char-size-32 -double-size-32 -warn-protos -si-revision 0.1 -proc ADSP-TS201 -o .\Debug\DMAInt.doj -MM

./Debug/Function1.doj :Function1.c 
	@echo ".\Function1.c"
	$(VDSP)/ccts.exe -c .\Function1.c -file-attr ProjectName=OverlayExampleC_TS201 -O -Ov100 -g -structs-do-not-overlap -no-multiline -I . -char-size-32 -double-size-32 -warn-protos -si-revision 0.1 -proc ADSP-TS201 -o .\Debug\Function1.doj -MM

./Debug/Function2.doj :Function2.c 
	@echo ".\Function2.c"
	$(VDSP)/ccts.exe -c .\Function2.c -file-attr ProjectName=OverlayExampleC_TS201 -O -Ov100 -g -structs-do-not-overlap -no-multiline -I . -char-size-32 -double-size-32 -warn-protos -si-revision 0.1 -proc ADSP-TS201 -o .\Debug\Function2.doj -MM

./Debug/Function3.doj :Function3.c 
	@echo ".\Function3.c"
	$(VDSP)/ccts.exe -c .\Function3.c -file-attr ProjectName=OverlayExampleC_TS201 -O -Ov100 -g -structs-do-not-overlap -no-multiline -I . -char-size-32 -double-size-32 -warn-protos -si-revision 0.1 -proc ADSP-TS201 -o .\Debug\Function3.doj -MM

./Debug/Function4.doj :Function4.c 
	@echo ".\Function4.c"
	$(VDSP)/ccts.exe -c .\Function4.c -file-attr ProjectName=OverlayExampleC_TS201 -O -Ov100 -g -structs-do-not-overlap -no-multiline -I . -char-size-32 -double-size-32 -warn-protos -si-revision 0.1 -proc ADSP-TS201 -o .\Debug\Function4.doj -MM

./Debug/inita.doj :inita.c $(VDSP)/TS/include/sysreg.h $(VDSP)/TS/include/builtins.h $(VDSP)/TS/include/defTS201.h $(VDSP)/TS/include/signal.h 
	@echo ".\inita.c"
	$(VDSP)/ccts.exe -c .\inita.c -file-attr ProjectName=OverlayExampleC_TS201 -O -Ov100 -g -structs-do-not-overlap -no-multiline -I . -char-size-32 -double-size-32 -warn-protos -si-revision 0.1 -proc ADSP-TS201 -o .\Debug\inita.doj -MM

./Debug/Maina.doj :Maina.c cache_macros.h 
	@echo ".\Maina.c"
	$(VDSP)/ccts.exe -c .\Maina.c -file-attr ProjectName=OverlayExampleC_TS201 -O -Ov100 -g -structs-do-not-overlap -no-multiline -I . -char-size-32 -double-size-32 -warn-protos -si-revision 0.1 -proc ADSP-TS201 -o .\Debug\Maina.doj -MM

./Debug/Mainb.doj :Mainb.c 
	@echo ".\Mainb.c"
	$(VDSP)/ccts.exe -c .\Mainb.c -file-attr ProjectName=OverlayExampleC_TS201 -O -Ov100 -g -structs-do-not-overlap -no-multiline -I . -char-size-32 -double-size-32 -warn-protos -si-revision 0.1 -proc ADSP-TS201 -o .\Debug\Mainb.doj -MM

./Debug/OvlyMgr.doj :OvlyMgr.c $(VDSP)/TS/include/sysreg.h $(VDSP)/TS/include/builtins.h OverlayCDef.h $(VDSP)/TS/include/defTS201.h 
	@echo ".\OvlyMgr.c"
	$(VDSP)/ccts.exe -c .\OvlyMgr.c -file-attr ProjectName=OverlayExampleC_TS201 -O -Ov100 -g -structs-do-not-overlap -no-multiline -I . -char-size-32 -double-size-32 -warn-protos -si-revision 0.1 -proc ADSP-TS201 -o .\Debug\OvlyMgr.doj -MM

./Debug/Variablesa.doj :Variablesa.c 
	@echo ".\Variablesa.c"
	$(VDSP)/ccts.exe -c .\Variablesa.c -file-attr ProjectName=OverlayExampleC_TS201 -O -Ov100 -g -structs-do-not-overlap -no-multiline -I . -char-size-32 -double-size-32 -warn-protos -si-revision 0.1 -proc ADSP-TS201 -o .\Debug\Variablesa.doj -MM

./Debug/DSPA.dxe ./Debug/DSPB.dxe ./Debug/_funct1.ovl ./Debug/_funct2.ovl ./Debug/_funct3.ovl ./Debug/_funct4.ovl :./Debug/Variablesa.doj ./Debug/OvlyMgr.doj ./Debug/Mainb.doj ./Debug/Maina.doj ./Debug/inita.doj ./Debug/Function4.doj ./Debug/Function3.doj ./Debug/Function2.doj ./Debug/Function1.doj ./Debug/DMAInt.doj ADSP-TS201_Ovl_MP_C.ldf $(VDSP)/TS/lib/ts20x_rev_1.0/ts_hdr_TS201.doj $(VDSP)/TS/lib/ts20x_rev_1.0/meminit_ts20x.doj $(VDSP)/TS/lib/ts20x_rev_1.0/ts_exit_TS201.doj Debug/Maina.doj Debug/OvlyMgr.doj Debug/inita.doj Debug/Variablesa.doj Debug/DMAInt.doj $(VDSP)/TS/lib/ts20x_rev_1.0/libc_TS201.dlb $(VDSP)/TS/lib/ts20x_rev_1.0/libio_TS201.dlb $(VDSP)/TS/lib/ts20x_rev_1.0/libdsp_TS201.dlb $(VDSP)/TS/lib/ts20x_rev_1.0/libcpprt_TS201.dlb $(VDSP)/TS/lib/ts20x_rev_1.0/libsim_TS201.dlb Debug/Function1.doj Debug/Function2.doj Debug/Function3.doj Debug/Function4.doj Debug/Mainb.doj 
	@echo "Linking..."
	$(VDSP)/ccts.exe .\Debug\DMAInt.doj .\Debug\Function1.doj .\Debug\Function2.doj .\Debug\Function3.doj .\Debug\Function4.doj .\Debug\inita.doj .\Debug\Maina.doj .\Debug\Mainb.doj .\Debug\OvlyMgr.doj .\Debug\Variablesa.doj -T .\ADSP-TS201_Ovl_MP_C.ldf -L .\Debug -flags-link -od,.\Debug -o .\Debug\OverlayExampleC_TS201.dxe -proc ADSP-TS201 -flags-link -MM

endif

ifeq ($(MAKECMDGOALS),OverlayExampleC_TS201_Debug_clean)

OverlayExampleC_TS201_Debug_clean:
	-$(RM) ".\Debug\DMAInt.doj"
	-$(RM) ".\Debug\Function1.doj"
	-$(RM) ".\Debug\Function2.doj"
	-$(RM) ".\Debug\Function3.doj"
	-$(RM) ".\Debug\Function4.doj"
	-$(RM) ".\Debug\inita.doj"
	-$(RM) ".\Debug\Maina.doj"
	-$(RM) ".\Debug\Mainb.doj"
	-$(RM) ".\Debug\OvlyMgr.doj"
	-$(RM) ".\Debug\Variablesa.doj"
	-$(RM) ".\Debug\DSPA.dxe"
	-$(RM) ".\Debug\DSPB.dxe"
	-$(RM) ".\Debug\_funct1.ovl"
	-$(RM) ".\Debug\_funct2.ovl"
	-$(RM) ".\Debug\_funct3.ovl"
	-$(RM) ".\Debug\_funct4.ovl"
	-$(RM) ".\Debug\*.ipa"
	-$(RM) ".\Debug\*.opa"
	-$(RM) ".\Debug\*.ti"
	-$(RM) ".\*.rbld"

endif