f_adder.fit.qmsg

全加器

{ "Info" "IQEXE_SEPARATOR" "" "Info: *******************************************************************" {  } {  } 3 0 "*******************************************************************" 0 0}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus II " "Info: Running Quartus II Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 5.1 Build 176 10/26/2005 SJ Full Version " "Info: Version 5.1 Build 176 10/26/2005 SJ Full Version" {  } {  } 0 0 "%1!s!" 0 0} { "Info" "IQEXE_START_BANNER_TIME" "Sun Nov 02 19:25:52 2008 " "Info: Processing started: Sun Nov 02 19:25:52 2008" {  } {  } 0 0 "Processing started: %1!s!" 0 0}  } {  } 4 0 "Running %2!s! %1!s!" 0 0}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off f_adder -c f_adder " "Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off f_adder -c f_adder" {  } {  } 0 0 "Command: %1!s!" 0 0}
{ "Info" "IMPP_MPP_USER_DEVICE" "f_adder EP1C12Q240C8 " "Info: Selected device EP1C12Q240C8 for design \"f_adder\"" {  } {  } 0 0 "Selected device %2!s! for design \"%1!s!\"" 0 0}
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Info: Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" {  } {  } 0 0 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Info: Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP1C6Q240C8 " "Info: Device EP1C6Q240C8 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0}  } {  } 2 0 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0}
{ "Info" "IFSAC_FSAC_PINS_MISSING_LOCATION_INFO" "5 5 " "Info: No exact pin location assignment(s) for 5 pins of 5 total pins" { { "Info" "IFSAC_FSAC_PIN_MISSING_LOCATION_INFO" "cout " "Info: Pin cout not assigned to an exact location on the device" {  } { { "f_adder.vhd" "" { Text "D:/Quatus2/works/summrize/f_adder/f_adder.vhd" 7 -1 0 } } { "d:/quatus2/bin/Assignment Editor.qase" "" { Assignment "d:/quatus2/bin/Assignment Editor.qase" 1 { { 0 "cout" } } } } { "d:/quatus2/bin/Report_Window_01.qrpt" "" { Report "d:/quatus2/bin/Report_Window_01.qrpt" "Compiler" "f_adder" "UNKNOWN" "V1" "D:/Quatus2/works/summrize/f_adder/db/f_adder.quartus_db" { Floorplan "D:/Quatus2/works/summrize/f_adder/" "" "" { cout } "NODE_NAME" } "" } } { "D:/Quatus2/works/summrize/f_adder/f_adder.fld" "" { Floorplan "D:/Quatus2/works/summrize/f_adder/f_adder.fld" "" "" { cout } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFSAC_FSAC_PIN_MISSING_LOCATION_INFO" "sum " "Info: Pin sum not assigned to an exact location on the device" {  } { { "f_adder.vhd" "" { Text "D:/Quatus2/works/summrize/f_adder/f_adder.vhd" 7 -1 0 } } { "d:/quatus2/bin/Assignment Editor.qase" "" { Assignment "d:/quatus2/bin/Assignment Editor.qase" 1 { { 0 "sum" } } } } { "d:/quatus2/bin/Report_Window_01.qrpt" "" { Report "d:/quatus2/bin/Report_Window_01.qrpt" "Compiler" "f_adder" "UNKNOWN" "V1" "D:/Quatus2/works/summrize/f_adder/db/f_adder.quartus_db" { Floorplan "D:/Quatus2/works/summrize/f_adder/" "" "" { sum } "NODE_NAME" } "" } } { "D:/Quatus2/works/summrize/f_adder/f_adder.fld" "" { Floorplan "D:/Quatus2/works/summrize/f_adder/f_adder.fld" "" "" { sum } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFSAC_FSAC_PIN_MISSING_LOCATION_INFO" "bin " "Info: Pin bin not assigned to an exact location on the device" {  } { { "f_adder.vhd" "" { Text "D:/Quatus2/works/summrize/f_adder/f_adder.vhd" 6 -1 0 } } { "d:/quatus2/bin/Assignment Editor.qase" "" { Assignment "d:/quatus2/bin/Assignment Editor.qase" 1 { { 0 "bin" } } } } { "d:/quatus2/bin/Report_Window_01.qrpt" "" { Report "d:/quatus2/bin/Report_Window_01.qrpt" "Compiler" "f_adder" "UNKNOWN" "V1" "D:/Quatus2/works/summrize/f_adder/db/f_adder.quartus_db" { Floorplan "D:/Quatus2/works/summrize/f_adder/" "" "" { bin } "NODE_NAME" } "" } } { "D:/Quatus2/works/summrize/f_adder/f_adder.fld" "" { Floorplan "D:/Quatus2/works/summrize/f_adder/f_adder.fld" "" "" { bin } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFSAC_FSAC_PIN_MISSING_LOCATION_INFO" "cin " "Info: Pin cin not assigned to an exact location on the device" {  } { { "f_adder.vhd" "" { Text "D:/Quatus2/works/summrize/f_adder/f_adder.vhd" 6 -1 0 } } { "d:/quatus2/bin/Assignment Editor.qase" "" { Assignment "d:/quatus2/bin/Assignment Editor.qase" 1 { { 0 "cin" } } } } { "d:/quatus2/bin/Report_Window_01.qrpt" "" { Report "d:/quatus2/bin/Report_Window_01.qrpt" "Compiler" "f_adder" "UNKNOWN" "V1" "D:/Quatus2/works/summrize/f_adder/db/f_adder.quartus_db" { Floorplan "D:/Quatus2/works/summrize/f_adder/" "" "" { cin } "NODE_NAME" } "" } } { "D:/Quatus2/works/summrize/f_adder/f_adder.fld" "" { Floorplan "D:/Quatus2/works/summrize/f_adder/f_adder.fld" "" "" { cin } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFSAC_FSAC_PIN_MISSING_LOCATION_INFO" "ain " "Info: Pin ain not assigned to an exact location on the device" {  } { { "f_adder.vhd" "" { Text "D:/Quatus2/works/summrize/f_adder/f_adder.vhd" 6 -1 0 } } { "d:/quatus2/bin/Assignment Editor.qase" "" { Assignment "d:/quatus2/bin/Assignment Editor.qase" 1 { { 0 "ain" } } } } { "d:/quatus2/bin/Report_Window_01.qrpt" "" { Report "d:/quatus2/bin/Report_Window_01.qrpt" "Compiler" "f_adder" "UNKNOWN" "V1" "D:/Quatus2/works/summrize/f_adder/db/f_adder.quartus_db" { Floorplan "D:/Quatus2/works/summrize/f_adder/" "" "" { ain } "NODE_NAME" } "" } } { "D:/Quatus2/works/summrize/f_adder/f_adder.fld" "" { Floorplan "D:/Quatus2/works/summrize/f_adder/f_adder.fld" "" "" { ain } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0}  } {  } 0 0 "No exact pin location assignment(s) for %1!d! pins of %2!d! total pins" 0 0}
{ "Info" "ITAN_TDC_DEFAULT_OPTIMIZATION_GOALS" "" "Info: Timing requirements not specified -- optimizing circuit to achieve the following default global requirements" { { "Info" "ITAN_TDC_ASSUMED_DEFAULT_REQUIREMENT" "fmax 1 MHz " "Info: Assuming a global fmax requirement of 1 MHz" {  } {  } 0 0 "Assuming a global %1!s! requirement of %2!s!" 0 0} { "Info" "ITAN_TDC_NO_DEFAULT_REQUIREMENT" "tsu " "Info: Not setting a global tsu requirement" {  } {  } 0 0 "Not setting a global %1!s! requirement" 0 0} { "Info" "ITAN_TDC_NO_DEFAULT_REQUIREMENT" "tco " "Info: Not setting a global tco requirement" {  } {  } 0 0 "Not setting a global %1!s! requirement" 0 0} { "Info" "ITAN_TDC_NO_DEFAULT_REQUIREMENT" "tpd " "Info: Not setting a global tpd requirement" {  } {  } 0 0 "Not setting a global %1!s! requirement" 0 0}  } {  } 0 0 "Timing requirements not specified -- optimizing circuit to achieve the following default global requirements" 0 0}
{ "Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Info: Performing register packing on registers with non-logic cell location assignments" {  } {  } 0 0 "Performing register packing on registers with non-logic cell location assignments" 0 0}
{ "Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Info: Completed register packing on registers with non-logic cell location assignments" {  } {  } 0 0 "Completed register packing on registers with non-logic cell location assignments" 0 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "User Assigned Global Signals Promotion Operation " "Info: Completed User Assigned Global Signals Promotion Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}
{ "Info" "IFYGR_FYGR_GLOBAL_LINES_NEEDED_FOR_TORNADO_DQS" "0 " "Info: DQS I/O pins require 0 global routing resources" {  } {  } 0 0 "DQS I/O pins require %1!d! global routing resources" 0 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Global Promotion Operation " "Info: Completed Auto Global Promotion Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_FYGR_REGPACKING_INFO" "" "Info: Starting register packing" {  } {  } 0 0 "Starting register packing" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Info: Started Fast Input/Output/OE register processing" {  } {  } 0 0 "Started Fast Input/Output/OE register processing" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Info: Finished Fast Input/Output/OE register processing" {  } {  } 0 0 "Finished Fast Input/Output/OE register processing" 0 0}
{ "Info" "IFYGR_FYGR_INFO_AUTO_MODE_REGISTER_PACKING" "Auto Normal " "Info: Fitter is using Normal packing mode for logic elements with Auto setting for Auto Packed Registers logic option" {  } {  } 0 0 "Fitter is using %2!s! packing mode for logic elements with %1!s! setting for Auto Packed Registers logic option" 0 0}
{ "Info" "IFSAC_FSAC_START_LUT_IO_RAM_PACKING" "" "Info: Moving registers into I/O cells, LUTs, and RAM blocks to improve timing and density" {  } {  } 0 0 "Moving registers into I/O cells, LUTs, and RAM blocks to improve timing and density" 0 0}
{ "Info" "IFSAC_FSAC_FINISH_LUT_IO_RAM_PACKING" "" "Info: Finished moving registers into I/O cells, LUTs, and RAM blocks" {  } {  } 0 0 "Finished moving registers into I/O cells, LUTs, and RAM blocks" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Info: Finished register packing" {  } {  } 0 0 "Finished register packing" 0 0}
{ "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement " "Info: Statistics of I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement" { { "Info" "IFSAC_FSAC_SINGLE_IOC_GROUP_STATISTICS" "5 unused 3.30 3 2 0 " "Info: Number of I/O pins in group: 5 (unused VREF, 3.30 VCCIO, 3 input, 2 output, 0 bidirectional)" { { "Info" "IFSAC_FSAC_IO_STDS_IN_IOC_GROUP" "LVTTL. " "Info: I/O standards used: LVTTL." {  } {  } 0 0 "I/O standards used: %1!s!" 0 0}  } {  } 0 0 "Number of I/O pins in group: %1!d! (%2!s! VREF, %3!s! VCCIO, %4!d! input, %5!d! output, %6!d! bidirectional)" 0 0}  } {  } 0 0 "Statistics of %1!s!" 0 0}
{ "Info" "IFSAC_FSAC_IO_STATS_BEFORE_AFTER_PLACEMENT" "before " "Info: I/O bank details before I/O pin placement" { { "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O banks " "Info: Statistics of I/O banks" { { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "1 does not use unused 2 42 " "Info: I/O bank number 1 does not use VREF pins and has unused VCCIO pins. 2 total pin(s) used --  42 pins available" {  } {  } 0 0 "I/O bank number %1!d! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "2 does not use unused 0 42 " "Info: I/O bank number 2 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  42 pins available" {  } {  } 0 0 "I/O bank number %1!d! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "3 does not use unused 0 45 " "Info: I/O bank number 3 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  45 pins available" {  } {  } 0 0 "I/O bank number %1!d! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "4 does not use unused 0 42 " "Info: I/O bank number 4 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  42 pins available" {  } {  } 0 0 "I/O bank number %1!d! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0}  } {  } 0 0 "Statistics of %1!s!" 0 0}  } {  } 0 0 "I/O bank details %1!s! I/O pin placement" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0 0 "Fitter placement preparation operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0 0 "Fitter placement operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0 0 "Fitter placement was successful" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Info: Fitter placement operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0 0 "Fitter routing operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Info: Optimizations that may affect the design's routability were skipped" {  } {  } 0 0 "Optimizations that may affect the design's routability were skipped" 0 0} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Info: Optimizations that may affect the design's timing were skipped" {  } {  } 0 0 "Optimizations that may affect the design's timing were skipped" 0 0}  } {  } 0 0 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Fixed Delay Chain Operation " "Info: Completed Fixed Delay Chain Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" {  } {  } 0 0 "Started post-fitting delay annotation" 0 0}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" {  } {  } 0 0 "Delay annotation completed successfully" 0 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Delay Chain Operation " "Info: Completed Auto Delay Chain Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 0 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 0 warnings" { { "Info" "IQEXE_END_BANNER_TIME" "Sun Nov 02 19:25:59 2008 " "Info: Processing ended: Sun Nov 02 19:25:59 2008" {  } {  } 0 0 "Processing ended: %1!s!" 0 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:08 " "Info: Elapsed time: 00:00:08" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0}