📄 panel.h
字号:
// Value for Spread_Spectrum_Control register
// 0x00: 0.097% ... 0x07: 12.5%
// Panel dething mode
#define PanelDethMode 0x31
// define panel timing. word constant used to program registers 0xd8 and 0xd9 during power up and power down
#define PowerUpPanelTiming 1 // 1 ms
#define PowerUpInvTiming 250 // 250 ms
#define PowerDownPanelTiming 1 // 1 ms
#define PowerDownInvTiming 250 // 250 ms
#endif
#if PANEL == SINAI38140CBx
#define PanelName "SINAI38140CBx\r\n"
#define PanelXga 1
#define PanelSxga 0
#define PanelUxga 0
#define PanelTwoPixelPerClk 0 // Single pixels output
#define PanelDepth 8
#define PanelSync_DE 0
#define PanelWidth 1024
#define PanelHeight 768
#define PanelMaxVFreq 75 // Hz
#define PanelMinVFreq 55 // Hz
#define PanelMaxHFreq 60000 // Hz
#define PanelMaxPClk 80000 // KHz
#define PanelMinHTotal 1200
#define PanelMaxHTotal 2500
#define PanelMinHSyncWidth 80
#define PanelMinHSyncBackPorch 80
#define PanelHSyncStart PanelMinHTotal - PanelMinHSyncWidth - PanelMinHSyncBackPorch
#define PanelHSyncEnd PanelHSyncStart + PanelMinHSyncWidth
#define PanelHActiveStart PanelMinHSyncBackPorch + PanelMinHSyncWidth
#define PanelMaxVTotal 1000
#define PanelTypVTotal 806
#define PanelMinVTotal 780
#define PanelMinVSyncWidth 2
#define PanelMinVSyncBackPorch 4
#define PanelVSyncStart PanelTypVTotal - PanelMinVSyncWidth - PanelMinVSyncBackPorch
#define PanelVSyncEnd PanelVSyncStart + PanelMinVSyncWidth
#define PanelVActiveStart PanelMinVSyncBackPorch + PanelMinVSyncWidth
#define FreeRunH_Freq 60000 //60KHz
#define FreeRunV_Freq 75 //75 Hz
#define FreeRunVtotal 800 //800 line
#define PanelInterface TTL_TO_TCON
#define PanelShortHsync 0
#define Panel_Invert_DVS 0xff
#define Panel_Invert_DHS 0xff
#define Panel_Invert_DCLK 0x00
#define Panel_Invert_DEN 0x00
#define PanelPadDrive 0x0333
#define Panel_Spread_Spect_En 0xff // 0xff : enable spectrum
// 0x00 : disable spectrum
#define PanelSpreadSpectrumCtrl 0x00
// Value for Spread_Spectrum_Control register
// 0x00: 0.097% ... 0x07: 12.5%
// Panel dething mode
#define PanelDethMode 0x31
// define panel timing. word constant used to program registers 0xd8 and 0xd9 during power up and power down
#define PowerUpPanelTiming 1 // 1 ms
#define PowerUpInvTiming 250 // 250 ms
#define PowerDownPanelTiming 1 // 1 ms
#define PowerDownInvTiming 250 // 250 ms
#endif
#if PANEL == Sharp_LQ150X1DG51
#define PanelName "Sharp_LQ150X1DG51\r\n"
#define PanelXga 1
#define PanelSxga 0
#define PanelUxga 0
#define PanelTwoPixelPerClk 1 // Dual pixels output
#define PanelDepth 6
#define PanelSync_DE 0
#define PanelWidth 1024
#define PanelHeight 768
#define PanelMaxVFreq 75 // Hz
#define PanelMinVFreq 55 // Hz
#define PanelMaxHFreq 60000 // Hz
#define PanelMaxPClk 80000 // KHz
#define PanelMinHTotal 1200
#define PanelMaxHTotal 1720
#define PanelMinHSyncWidth 80
#define PanelMinHSyncBackPorch 80
#define PanelHSyncStart PanelMinHTotal - PanelMinHSyncWidth - PanelMinHSyncBackPorch
#define PanelHSyncEnd PanelHSyncStart + PanelMinHSyncWidth
#define PanelHActiveStart PanelMinHSyncBackPorch + PanelMinHSyncWidth
#define PanelMaxVTotal 990
#define PanelTypVTotal 806
#define PanelMinVTotal 780
#define PanelMinVSyncWidth 3
#define PanelMinVSyncBackPorch 7
#define PanelVSyncStart PanelTypVTotal - PanelMinVSyncWidth - PanelMinVSyncBackPorch
#define PanelVSyncEnd PanelVSyncStart + PanelMinVSyncWidth
#define PanelVActiveStart PanelMinVSyncBackPorch + PanelMinVSyncWidth
#define FreeRunH_Freq 60000 //60KHz
#define FreeRunV_Freq 75 //75 Hz
#define FreeRunVtotal 800 //800 line
#define PanelInterface TTL_TO_TCON
#define PanelShortHsync 0
#define Panel_Invert_DVS 0xff
#define Panel_Invert_DHS 0xff
#define Panel_Invert_DCLK 0x00
#define Panel_Invert_DEN 0x00
#define PanelPadDrive 0x0333
#define Panel_Spread_Spect_En 0xff // 0xff : enable spectrum
// 0x00 : disable spectrum
#define PanelSpreadSpectrumCtrl 0x00
// Value for Spread_Spectrum_Control register
// 0x00: 0.097% ... 0x07: 12.5%
// define panel timing. word constant used to program registers 0xd8 and 0xd9 during power up and power down
#define PowerUpPanelTiming 1 // 1 ms
#define PowerUpInvTiming 250 // 250 ms
#define PowerDownPanelTiming 1 // 1 ms
#define PowerDownInvTiming 250 // 250 ms
#endif
#if PANEL == CMO_M170E4_L01
#define PanelName "CMO_M170E4_L01\r\n"
#define PanelXga 0
#define PanelSxga 1
#define PanelUxga 0
#define PanelTwoPixelPerClk 1 // Double pixels output
#define PanelDepth 6
#define PanelSync_DE 0 //0=H/V 1=DE
#define PanelWidth 1280
#define PanelHeight 1024
#define PanelMaxVFreq 75 // Hz
#define PanelMinVFreq 56 // Hz
#define PanelMaxHFreq 82000 // Hz
#define PanelMaxPClk 140000 // KHz
#define PanelMinHTotal 1688
#define PanelMaxHTotal 2046
#define PanelMinHSyncWidth 80
#define PanelMinHSyncBackPorch 80
#define PanelHSyncStart PanelMinHTotal - PanelMinHSyncWidth - PanelMinHSyncBackPorch
#define PanelHSyncEnd PanelHSyncStart + PanelMinHSyncWidth
#define PanelHActiveStart PanelMinHSyncBackPorch + PanelMinHSyncWidth
#define PanelMaxVTotal 1274//2047
#define PanelTypVTotal 1066
#define PanelMinVTotal 1040
#define PanelMinVSyncWidth 3
#define PanelMinVSyncBackPorch 7
#define PanelVSyncStart PanelTypVTotal - PanelMinVSyncWidth - PanelMinVSyncBackPorch
#define PanelVSyncEnd PanelVSyncStart + PanelMinVSyncWidth
#define PanelVActiveStart PanelMinVSyncBackPorch + PanelMinVSyncWidth
#define FreeRunH_Freq 64000 //64KHz
#define FreeRunV_Freq 60 //60 Hz
#define FreeRunVtotal 1066 //1066 line
#define PanelInterface LVDS_TO_TCON
#define PanelShortHsync 0
#define Panel_Invert_DVS 0x00
#define Panel_Invert_DHS 0x00
#define Panel_Invert_DCLK 0x00
#define Panel_Invert_DEN 0x00
#define PanelPadDrive 0x0333
#define Panel_Spread_Spect_En 0xff // 0xff : enable spectrum
// 0x00 : disable spectrum
#define PanelSpreadSpectrumCtrl 0x04
// Value for Spread_Spectrum_Control register
// 0x00: 0.097% ... 0x07: 12.5%
// Panel dething mode
#define PanelDethMode 0x33
// define panel timing. word constant used to program registers 0xd8 and 0xd9 during power up and power down
#define PowerUpPanelTiming 1 // 1 ms
#define PowerUpInvTiming 250 // 250 ms
#define PowerDownPanelTiming 1 // 1 ms
#define PowerDownInvTiming 250 // 250 ms
#endif
#if PANEL == NL6448BC33_46
#define PanelName "NL6448BC33_46\r\n"
#define PanelXga 1
#define PanelSxga 0
#define PanelUxga 0
#define PanelTwoPixelPerClk 0 // Double pixels output
#define PanelDepth 6
#define PanelSync_DE 0 //0=H/V 1=DE
#define PanelWidth 640
#define PanelHeight 480
#define PanelMaxVFreq 62 // Hz
#define PanelMinVFreq 58 // Hz
#define PanelMaxHFreq 33333 // Hz
#define PanelMaxPClk 26000 // KHz
#define PanelMinHTotal 760
#define PanelMaxHTotal 900
#define PanelMinHSyncWidth 40
#define PanelMinHSyncBackPorch 40
#define PanelHSyncStart PanelMinHTotal - PanelMinHSyncWidth - PanelMinHSyncBackPorch
#define PanelHSyncEnd PanelHSyncStart + PanelMinHSyncWidth
#define PanelHActiveStart PanelMinHSyncBackPorch + PanelMinHSyncWidth
#define PanelMaxVTotal 600
#define PanelTypVTotal 525
#define PanelMinVTotal 492
#define PanelMinVSyncWidth 3
#define PanelMinVSyncBackPorch 7
#define PanelVSyncStart PanelTypVTotal - PanelMinVSyncWidth - PanelMinVSyncBackPorch
#define PanelVSyncEnd PanelVSyncStart + PanelMinVSyncWidth
#define PanelVActiveStart PanelMinVSyncBackPorch + PanelMinVSyncWidth
#define FreeRunH_Freq 64000 //64KHz
#define FreeRunV_Freq 60 //60 Hz
#define FreeRunVtotal 1066 //1066 line
#define PanelInterface TTL_TO_TCON
#define PanelShortHsync 0
#define Panel_Invert_DVS 0xff
#define Panel_Invert_DHS 0xff
#define Panel_Invert_DCLK 0x00
#define Panel_Invert_DEN 0x00
#define PanelPadDrive 0x0333
#define Panel_Spread_Spect_En 0xff // 0xff : enable spectrum
// 0x00 : disable spectrum
#define PanelSpreadSpectrumCtrl 0x00
// Value for Spread_Spectrum_Control register
// 0x00: 0.097% ... 0x07: 12.5%
// Panel dething mode
#define PanelDethMode 0x31
// define panel timing. word constant used to program registers 0xd8 and 0xd9 during power up and power down
#define PowerUpPanelTiming 1 // 1 ms
#define PowerUpInvTiming 250 // 250 ms
#define PowerDownPanelTiming 1 // 1 ms
#define PowerDownInvTiming 250 // 250 ms
#endif
#if PANEL == AU_L170EN05
#define PanelName "AU_L170EN05\r\n"
#define PanelXga 0
#define PanelSxga 1
#define PanelUxga 0
#define PanelTwoPixelPerClk 1 // Double pixels output
#define PanelDepth 6
#define PanelSync_DE 0 //0=H/V 1=DE
#define PanelWidth 1280
#define PanelHeight 1024
#define PanelMaxVFreq 75 // Hz
#define PanelMinVFreq 56 // Hz
#define PanelMaxHFreq 82000 // Hz
#define PanelMaxPClk 140000 // KHz
#define PanelMinHTotal 1688//1600
#define PanelMaxHTotal 2046
#define PanelMinHSyncWidth 80
#define PanelMinHSyncBackPorch 80
#define PanelHSyncStart PanelMinHTotal - PanelMinHSyncWidth - PanelMinHSyncBackPorch
#define PanelHSyncEnd PanelHSyncStart + PanelMinHSyncWidth
#define PanelHActiveStart PanelMinHSyncBackPorch + PanelMinHSyncWidth
#define PanelMaxVTotal 2047
#define PanelTypVTotal 1066
#define PanelMinVTotal 1040
#define PanelMinVSyncWidth 3
#define PanelMinVSyncBackPorch 7
#define PanelVSyncStart PanelTypVTotal - PanelMinVSyncWidth - PanelMinVSyncBackPorch
#define PanelVSyncEnd PanelVSyncStart + PanelMinVSyncWidth
#define PanelVActiveStart PanelMinVSyncBackPorch + PanelMinVSyncWidth
#define FreeRunH_Freq 64000 //64KHz
#define FreeRunV_Freq 60 //60 Hz
#define FreeRunVtotal 1066 //1066 line
#define PanelInterface LVDS_TO_TCON
#define PanelShortHsync 0
#define Panel_Invert_DVS 0x00
#define Panel_Invert_DHS 0x00
#define Panel_Invert_DCLK 0xff
#define Panel_Invert_DEN 0x00
#define PanelPadDrive 0x0333
#define Panel_Spread_Spect_En 0xff // 0xff : enable spectrum
// 0x00 : disable spectrum
#define PanelSpreadSpectrumCtrl 0x04
// Value for Spread_Spectrum_Control register
// 0x00: 0.097% ... 0x07: 12.5%
// Panel dething mode
#define PanelDethMode 0x41
// define panel timing. word constant used to program registers 0xd8 and 0xd9 during power up and power down
#define PowerUpPanelTiming 1 // 1 ms
#define PowerUpInvTiming 250 // 250 ms
#define PowerDownPanelTiming 1 // 1 ms
#define PowerDownInvTiming 250 // 250 ms
#endif
#if PANEL == AU_M150XN05_1
#define PanelName "AU_M150XN05_1\r\n"
#define PanelXga 1
#define PanelSxga 0
#define PanelUxga 0
#define PanelTwoPixelPerClk 1 // Double pixels output
#define PanelDepth 6
#define PanelSync_DE 0 //0=H/V mode 1=DE mode
#define PanelWidth 1024
#define PanelHeight 768
#define PanelMaxVFreq 76 // Hz
#define PanelMinVFreq 50 // Hz
#define PanelMaxHFreq 60000 // Hz
#define PanelMaxPClk 80000 // KHz
#define PanelMinHTotal 1200
#define PanelMaxHTotal 1800
#define PanelMinHSyncWidth 80
#define PanelMinHSyncBackPorch 80
#define PanelHSyncStart PanelMinHTotal - PanelMinHSyncWidth - PanelMinHSyncBackPorch
#define PanelHSyncEnd PanelHSyncStart + PanelMinHSyncWidth
#define PanelHActiveStart PanelMinHSyncBackPorch + PanelMinHSyncWidth
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -