stsp_v61_export.m

用matlab实现的利用模拟退火算法(SA)解决旅行商问题(TSP).

'Tag','maximum_iterations',...
'Behavior',get(0,'defaultuicontrolBehavior'));

appdata = [];
appdata.lastValidTag = 'cooling_rate';

h14 = uicontrol(...
'Parent',h1,...
'Units','characters',...
'BackgroundColor',[0.9 0.9 0.9],...
'Callback','stsp_v61_export(''cooling_rate_Callback'',gcbo,[],guidata(gcbo))',...
'Min',0.5,...
'Position',[12.8 23.8461538461539 23 1.53846153846154],...
'String','',...
'Style','slider',...
'SliderStep',[0.005 0.1],...
'Value',0.97,...
'CreateFcn', {@local_CreateFcn, 'stsp_v61_export(''cooling_rate_CreateFcn'',gcbo,[],guidata(gcbo))', appdata} ,...
'Tag','cooling_rate',...
'Behavior',get(0,'defaultuicontrolBehavior'));

appdata = [];
appdata.lastValidTag = 'cities_to_swap';

h15 = uicontrol(...
'Parent',h1,...
'Units','characters',...
'BackgroundColor',[0.9 0.9 0.9],...
'Callback','stsp_v61_export(''cities_to_swap_Callback'',gcbo,[],guidata(gcbo))',...
'Max',10,...
'Min',2,...
'Position',[12.8 14 23 1.53846153846154],...
'String','',...
'Style','slider',...
'SliderStep',[0.125 0.1],...
'Value',2,...
'CreateFcn', {@local_CreateFcn, 'stsp_v61_export(''cities_to_swap_CreateFcn'',gcbo,[],guidata(gcbo))', appdata} ,...
'Tag','cities_to_swap',...
'Behavior',get(0,'defaultuicontrolBehavior'));

appdata = [];
appdata.lastValidTag = 'text6';

h16 = uicontrol(...
'Parent',h1,...
'Units','characters',...
'FontSize',10,...
'FontWeight','bold',...
'ForegroundColor',[0 0.250980392156863 0.501960784313725],...
'HorizontalAlignment','left',...
'Position',[13 11.6153846153846 27 1.53846153846154],...
'String','Select data set',...
'Style','text',...
'CreateFcn', {@local_CreateFcn, 'stsp_v61_export(''cities_to_swap_display_CreateFcn'',gcbo,[],guidata(gcbo))', appdata} ,...
'Tag','text6',...
'Behavior',get(0,'defaultuicontrolBehavior'));

appdata = [];
appdata.lastValidTag = 'select_data_set';

h17 = uicontrol(...
'Parent',h1,...
'Units','characters',...
'BackgroundColor',[1 1 1],...
'Callback','stsp_v61_export(''select_data_set_Callback'',gcbo,[],guidata(gcbo))',...
'Position',[13 9.46153846153847 23.8 1.76923076923077],...
'String',{  'Select TSPLIB data'; '20 cities'; '29 cities'; '48 cities'; '70 cities'; '76 cities'; '96 cities'; '101 cities'; 'PCB 442'; '532 cities' },...
'Style','popupmenu',...
'Value',1,...
'CreateFcn', {@local_CreateFcn, 'stsp_v61_export(''select_data_set_CreateFcn'',gcbo,[],guidata(gcbo))', appdata} ,...
'Tag','select_data_set',...
'Behavior',get(0,'defaultuicontrolBehavior'));


hsingleton = h1;


% --- Set application data first then calling the CreateFcn. 
function local_CreateFcn(hObject, eventdata, createfcn, appdata)

if ~isempty(appdata)
   names = fieldnames(appdata);
   for i=1:length(names)
       name = char(names(i));
       setappdata(hObject, name, getfield(appdata,name));
   end
end

if ~isempty(createfcn)
   eval(createfcn);
end


% --- Handles default GUIDE GUI creation and callback dispatch
function varargout = gui_mainfcn(gui_State, varargin)


%   GUI_MAINFCN provides these command line APIs for dealing with GUIs
%
%      STSP_V61_EXPORT, by itself, creates a new STSP_V61_EXPORT or raises the existing
%      singleton*.
%
%      H = STSP_V61_EXPORT returns the handle to a new STSP_V61_EXPORT or the handle to
%      the existing singleton*.
%
%      STSP_V61_EXPORT('CALLBACK',hObject,eventData,handles,...) calls the local
%      function named CALLBACK in STSP_V61_EXPORT.M with the given input arguments.
%
%      STSP_V61_EXPORT('Property','Value',...) creates a new STSP_V61_EXPORT or raises the
%      existing singleton*.  Starting from the left, property value pairs are
%      applied to the GUI before untitled_OpeningFunction gets called.  An
%      unrecognized property name or invalid value makes property application
%      stop.  All inputs are passed to untitled_OpeningFcn via varargin.
%
%      *See GUI Options on GUIDE's Tools menu.  Choose "GUI allows only one
%      instance to run (singleton)".

%   Copyright 1984-2005 The MathWorks, Inc.
%   $Revision: 1.4.6.12 $ $Date: 2005/06/21 19:41:16 $

gui_StateFields =  {'gui_Name'
                    'gui_Singleton'
                    'gui_OpeningFcn'
                    'gui_OutputFcn'
                    'gui_LayoutFcn'
                    'gui_Callback'};
gui_Mfile = '';
for i=1:length(gui_StateFields)
    if ~isfield(gui_State, gui_StateFields{i})
        error('Could not find field %s in the gui_State struct in GUI M-file %s', gui_StateFields{i}, gui_Mfile);        
    elseif isequal(gui_StateFields{i}, 'gui_Name')
        gui_Mfile = [gui_State.(gui_StateFields{i}), '.m'];
    end
end

numargin = length(varargin);

if numargin == 0
    % STSP_V61_EXPORT
    % create the GUI
    gui_Create = 1;
elseif isequal(ishandle(varargin{1}), 1) && ispc && iscom(varargin{1}) && isequal(varargin{1},gcbo)
    % STSP_V61_EXPORT(ACTIVEX,...)    
    vin{1} = gui_State.gui_Name;
    vin{2} = [get(varargin{1}.Peer, 'Tag'), '_', varargin{end}];
    vin{3} = varargin{1};
    vin{4} = varargin{end-1};
    vin{5} = guidata(varargin{1}.Peer);
    feval(vin{:});
    return;
elseif ischar(varargin{1}) && numargin>1 && isequal(ishandle(varargin{2}), 1)
    % STSP_V61_EXPORT('CALLBACK',hObject,eventData,handles,...)
    gui_Create = 0;
else
    % STSP_V61_EXPORT(...)
    % create the GUI and hand varargin to the openingfcn
    gui_Create = 1;
end

if gui_Create == 0
    varargin{1} = gui_State.gui_Callback;
    if nargout
        [varargout{1:nargout}] = feval(varargin{:});
    else
        feval(varargin{:});
    end
else
    if gui_State.gui_Singleton
        gui_SingletonOpt = 'reuse';
    else
        gui_SingletonOpt = 'new';
    end
    
    % Open fig file with stored settings.  Note: This executes all component
    % specific CreateFunctions with an empty HANDLES structure.
    
    % Do feval on layout code in m-file if it exists
    if ~isempty(gui_State.gui_LayoutFcn)
        gui_hFigure = feval(gui_State.gui_LayoutFcn, gui_SingletonOpt);
        % openfig (called by local_openfig below) does this for guis without
        % the LayoutFcn. Be sure to do it here so guis show up on screen.
        movegui(gui_hFigure,'onscreen')
    else
        gui_hFigure = local_openfig(gui_State.gui_Name, gui_SingletonOpt);            
        % If the figure has InGUIInitialization it was not completely created
        % on the last pass.  Delete this handle and try again.
        if isappdata(gui_hFigure, 'InGUIInitialization')
            delete(gui_hFigure);
            gui_hFigure = local_openfig(gui_State.gui_Name, gui_SingletonOpt);            
        end
    end
    
    % Set flag to indicate starting GUI initialization
    setappdata(gui_hFigure,'InGUIInitialization',1);

    % Fetch GUIDE Application options
    gui_Options = getappdata(gui_hFigure,'GUIDEOptions');
    
    if ~isappdata(gui_hFigure,'GUIOnScreen')
        % Adjust background color
        if gui_Options.syscolorfig 
            set(gui_hFigure,'Color', get(0,'DefaultUicontrolBackgroundColor'));
        end

        % Generate HANDLES structure and store with GUIDATA. If there is
        % user set GUI data already, keep that also.
        data = guidata(gui_hFigure);
        handles = guihandles(gui_hFigure);
        if ~isempty(handles)
            if isempty(data)
                data = handles;
            else
                names = fieldnames(handles);
                for k=1:length(names)
                    data.(char(names(k)))=handles.(char(names(k)));
                end
            end
        end
        guidata(gui_hFigure, data);
    end
    
    % If user specified 'Visible','off' in p/v pairs, don't make the figure
    % visible.
    gui_MakeVisible = 1;
    for ind=1:2:length(varargin)
        if length(varargin) == ind
            break;
        end
        len1 = min(length('visible'),length(varargin{ind}));
        len2 = min(length('off'),length(varargin{ind+1}));
        if ischar(varargin{ind}) && ischar(varargin{ind+1}) && ...
                strncmpi(varargin{ind},'visible',len1) && len2 > 1
            if strncmpi(varargin{ind+1},'off',len2)
                gui_MakeVisible = 0;
            elseif strncmpi(varargin{ind+1},'on',len2)
                gui_MakeVisible = 1;
            end
        end
    end
    
    % Check for figure param value pairs
    for index=1:2:length(varargin)
        if length(varargin) == index || ~ischar(varargin{index})
            break;
        end
        try set(gui_hFigure, varargin{index}, varargin{index+1}), catch break, end
    end

    % If handle visibility is set to 'callback', turn it on until finished
    % with OpeningFcn
    gui_HandleVisibility = get(gui_hFigure,'HandleVisibility');
    if strcmp(gui_HandleVisibility, 'callback')
        set(gui_hFigure,'HandleVisibility', 'on');
    end
    
    feval(gui_State.gui_OpeningFcn, gui_hFigure, [], guidata(gui_hFigure), varargin{:});
    
    if ishandle(gui_hFigure)
        % Update handle visibility
        set(gui_hFigure,'HandleVisibility', gui_HandleVisibility);
        
        % Make figure visible
        if gui_MakeVisible
            set(gui_hFigure, 'Visible', 'on')
            if gui_Options.singleton 
                setappdata(gui_hFigure,'GUIOnScreen', 1);
            end
        end

        % Done with GUI initialization
        rmappdata(gui_hFigure,'InGUIInitialization');
    end
    
    % If handle visibility is set to 'callback', turn it on until finished with
    % OutputFcn
    if ishandle(gui_hFigure)
        gui_HandleVisibility = get(gui_hFigure,'HandleVisibility');
        if strcmp(gui_HandleVisibility, 'callback')
            set(gui_hFigure,'HandleVisibility', 'on');
        end
        gui_Handles = guidata(gui_hFigure);
    else
        gui_Handles = [];
    end
    
    if nargout
        [varargout{1:nargout}] = feval(gui_State.gui_OutputFcn, gui_hFigure, [], gui_Handles);
    else
        feval(gui_State.gui_OutputFcn, gui_hFigure, [], gui_Handles);
    end
    
    if ishandle(gui_hFigure)
        set(gui_hFigure,'HandleVisibility', gui_HandleVisibility);
    end
end    

function gui_hFigure = local_openfig(name, singleton)

% this application data is used to indicate the running mode of a GUIDE
% GUI to distinguish it from the design mode of the GUI in GUIDE.
setappdata(0,'OpenGuiWhenRunning',1);

% openfig with three arguments was new from R13. Try to call that first, if
% failed, try the old openfig.
try 
    gui_hFigure = openfig(name, singleton, 'auto');
catch
    % OPENFIG did not accept 3rd input argument until R13,
    % toggle default figure visible to prevent the figure
    % from showing up too soon.
    gui_OldDefaultVisible = get(0,'defaultFigureVisible');
    set(0,'defaultFigureVisible','off');
    gui_hFigure = openfig(name, singleton);
    set(0,'defaultFigureVisible',gui_OldDefaultVisible);
end
rmappdata(0,'OpenGuiWhenRunning');