pcb_rtd3580d_lcdtv_demo_pcb3.h

RTD2662板卡源代码

#define _PIN_104								(0 & 0x07)	// 0 ~ 7 (0: P7D4i, 1: P7D4o<open-drain>, 2: P7D4o<push-pull>, 3: SD1, 4: IRQ, 5: TCON[5], 6: SPDIF1, 7: IICSDA)
#define _PIN_105								(1 & 0x07)	// 0 ~ 5 (0: P8D0i, 1: P8D0o<open-drain>, 2: P8D0o<push-pull>, 3: TCON[9], 4: SD0, 5: SPDIF0)

#define _PIN_108								(0 & 0x07)	// 0 ~ 5 (0: P8D1i, 1: P8D1o<open-drain>, 2: P8D1o<push-pull>, 3: CLKO, 4: MCK, 5: TCON[7])
#define _PIN_109								(1 & 0x07)	// 0 ~ 5 (0: P3D2i, 1: P3D2o<open-drain>, 2: P3D2o<push-pull>, 3: INT0, 4: TCON[3], 5: SCK)
#define _PIN_110								(1 & 0x07)	// 0 ~ 5 (0: P3D3i, 1: P3D3o<open-drain>, 2: P3D3o<push-pull>, 3: INT1, 4: TCON[6], 5: WS)
#define _PIN_111								(0 & 0x07)	// 0 ~ 6 (0: P3D4i, 1: P3D4o<open-drain>, 2: P3D4o<push-pull>, 3: T0, 4: TCON[4], 5: SD0, 6: SPDIF0)
#define _PIN_112								(1 & 0x07)	// 0 ~ 6 (0: P3D5i, 1: P3D5o<open-drain>, 2: P3D5o<push-pull>, 3: T1, 4: TCON[9], 5: SD1, 6: SPDIF1)
#define _PIN_113								(6 & 0x07)	// 0 ~ 6 (0: P3D6i, 1: P3D6o<open-drain>, 2: P3D6o<push-pull>, 3: TCON[1], 4: SD2, 5: SPDIF2, 6: IrDA)
#define _PIN_114								(1 & 0x07)	// 0 ~ 6 (0: P3D7i, 1: P3D7o<open-drain>, 2: P3D7o<push-pull>, 3: TCON[13], 4: SD3, 5: SPDIF3, 6: VCLK)

#define _PIN_121								(0 & 0x03)	// 0 ~ 3 (0: DDCSCL3, 1: P7D3i, 2: P7D3o<open-drain>, 3: P7D3o<push-pull>)
#define _PIN_122								(0 & 0x03)	// 0 ~ 3 (0: DDCSDA3, 1: P7D2i, 2: P7D2o<open-drain>, 3: P7D2o<push-pull>)
#define _PIN_123								(0 & 0x03)	// 0 ~ 3 (0: DDCSDA2, 1: P7D1i, 2: P7D1o<open-drain>, 3: P7D1o<push-pull>)
#define _PIN_124								(0 & 0x03)	// 0 ~ 3 (0: DDCSCL2, 1: P7D0i, 2: P7D0o<open-drain>, 3: P7D0o<push-pull>)

//--------------------------------------------------
// Piblic IO define
//--------------------------------------------------
#define bI2CSDA									(_MCU_PORT67)
#define bI2CSCL									(_MCU_PORT66)
#define bPANELPOWER 							(_MCU_PORT80)
sbit    bLIGHTPOWER                             = P1^0;

//--------------------------------------------------
// Connect definitions
//--------------------------------------------------
sbit    bVGACONNECT                             = P1^3;
#define bHDMICONNECT							(_MCU_PORT55)
sbit    bHot_Plug                               = P3^7;
#define bDVICONNECT                             0

//--------------------------------------------------
//            Key definitions
//--------------------------------------------------
#if(_KEY_SCAN_TYPE == _KEY_SCAN_NORMAL)

#define bKey_P54                                (_MCU_PORT54)   //Power       
#define bKey_P56                                (_MCU_PORT56)   //Down
#define bKey_P55                                (_MCU_PORT55)   //Up
#define bKey_P57         						(_MCU_PORT57)   //Left
#define bKey_P76								(_MCU_PORT76)   //Right
sbit    bKey_P34								= P3^4;         //Source
#define bKey_P81								(_MCU_PORT81)   //Menu

#else

//MCU_ADC0,MCU_ADC1,MCU_ADC2,MCU_ADC3,MCU_ADC4
#define AD_KEY0                                 MCU_ADC0
#define AD_KEY1                                 MCU_ADC2
#define AD_KEY2                                 MCU_ADC3
#define AD_KEY3                                 MCU_ADC_NONE
#define AD_KEY4                                 MCU_ADC_NONE

#define bAD0_Key_0                              2   //Power       
#define bAD0_Key_1                              44  //Down
#define bAD0_Key_2                              22  //Up

#define bAD1_Key_0                              55  //Left
#define bAD1_Key_1								13  //Right
#define bAD1_Key_2								37  //Source

#define bAD2_Key_0							    16  //Menu
#define bAD2_Key_1							    34  //Menu
#define bAD2_Key_2                              0

#endif

//--------------------------------------------------
//            LED definitions
//--------------------------------------------------
sbit bLED2									    = P3^2;
sbit bLED1									    = P3^3;


//--------------------------------------------------
//            Audio definitions
//--------------------------------------------------
#define AUDIO_TYPE                              _AUDIO_SC7313      // _AUDIO_SC7313,_AUDIO_PWM 

#define bAUDIO_MUTE_A							(_MCU_PORT64)
#define SET_bAUDIO_MUTE_A(x)					(bAUDIO_MUTE_A = x)
#define _MUTE_ON                                1
#define _MUTE_OFF                               0
#define bMUTE                                   (bAUDIO_MUTE_A)

#if (AUDIO_TYPE == _AUDIO_PWM)
#define _AUDIO_A                                (_MCU_PORT63)
#define _AUDIO_B                                (_MCU_PORT62)

#define _VOLUME_INV                             1
#define _MAX_VOLUME                             255
#define _MIN_VOLUME                             0

/*
_RTD_PWM0, _RTD_PWM1, _RTD_PWM2, _RTD_PWM3, _RTD_PWM4, _RTD_PWM5 
*/
#define bVOLUME_PWM                             _RTD_PWM5

#endif

#if (AUDIO_TYPE == _AUDIO_SC7313)
#define _SOUND_PROCESSOR                        _ON      // _ON, _OFF
#else
#define _SOUND_PROCESSOR                        _OFF      // _ON, _OFF
#endif

//--------------------------------------------------
// Definitions for Backlight PWM Setting
//--------------------------------------------------
/*
_RTD_PWM0, _RTD_PWM1, _RTD_PWM2, _RTD_PWM3, _RTD_PWM4, _RTD_PWM5 
*/
#define _BACKLIGHT_PWM                         _RTD_PWM1
#define _BACKLIGHT_PWM_INVERSE                 _DISABLE    // _ENABLE,  _DISABLE

//--------------------------------------------------
// PWM Supported
//--------------------------------------------------
#define _MCU_PWM0_SUPPORT                      _OFF
#define _MCU_PWM1_SUPPORT                      _ON
#define _MCU_PWM2_SUPPORT                      _OFF
#define _MCU_PWM3_SUPPORT                      _OFF
#define _MCU_PWM4_SUPPORT                      _OFF
#define _MCU_PWM5_SUPPORT                      _OFF

#define _MCU_PWM_SUPPORT                       (_MCU_PWM0_SUPPORT       |  \
                                               (_MCU_PWM1_SUPPORT << 1) |  \
                                               (_MCU_PWM2_SUPPORT << 2) |  \
                                               (_MCU_PWM3_SUPPORT << 3) |  \
                                               (_MCU_PWM4_SUPPORT << 4) |  \
                                               (_MCU_PWM5_SUPPORT << 5))

//--------------------------------------------------
// Over Driving Supported
//--------------------------------------------------
#define _OD_SUPPORT								_OFF	//2660 not support over driving
#define _OD_COMPRESSION                 		_OFF    //2660 not support over driving

//--------------------------------------------------
// EDID
//--------------------------------------------------
#define _DDC_CHANNEL_FOR_D0 				   _DDC2	// DDC Channel SEL for digital input 0
#define _DDC_CHANNEL_FOR_D1 				   _DDC3	// DDC Channel SEL for digital input 1

//--------------------------------------------------
// Interior VGA  EDID 
//--------------------------------------------------
#define _VGA_EDID                              _ON

//--------------------------------------------------
// HDMI EDID
//--------------------------------------------------
#define _HDMI_EDID                             _OFF
#define _HDMI_DDC_CHANNEL_SELECT 		       _DDC_CHANNEL_FOR_D0

//--------------------------------------------------
// Interior DVI  EDID 
//--------------------------------------------------
#define _DVI_EDID                              _OFF
#define _DVI_DDC_CHANNEL_SELECT                _DDC_CHANNEL_FOR_D1

//--------------------------------------------------
// HDCP Supported
//--------------------------------------------------
#define _HDCP_SUPPORT                   		_ON

//--------------------------------------------------
// HDMI HOT PLUG OPTION
//--------------------------------------------------
#define _HDMI_HOT_PLUG_OPTION              		_DISABLE


//--------------------------------------------------
// For digital input swap
//--------------------------------------------------
#define _CHANNEL_D0_RG_SWAP                    (_ENABLE << 6)
#define _CHANNEL_D0_PN_SWAP                    (_ENABLE << 5)

#define _CHANNEL_D1_RG_SWAP                    (_DISABLE << 6)
#define _CHANNEL_D1_PN_SWAP                    (_DISABLE << 5)

#define _SLEEP_FUNC                            _ENABLE

#define _ICM_FUNC                              _ENABLE