mst705Ȧ

MST705源代码

// MSTAR SCALER CHIP FIRMWARE
//=======================================================
#include "reg52.h"

#ifndef _BOARD_H_
#define _BOARD_H_

#define BD_DEMO_702				0
#define BD_DEMO_703				1
#define BD_DEMO_705				2

#define BD_TYPE					BD_DEMO_705//BD_DEMO_705
//-----------EEprom Define-------------------
#define RM_TYPE_24C02			0
#define RM_TYPE_24C04			1
#define RM_TYPE_24C08			2
#define RM_TYPE_24C16			3
#define RM_TYPE_24C32			4
#define RM_TYPE_SST512			5
#define RM_TYPE_SST010			6
#define RM_TYPE_PMC512			7
#define RM_TYPE_PMC010			8
#define RM_TYPE_SAI512			9
#define RM_TYPE_SAI010			10

//-------SFD_ADDRESS Define----------------
#define LOAD_4K_TO				0x0000
#define SFD_ADDRESS		        0xE000

//-----------Chip Define-------------------
#define MST702					0
#define MST703					1
#define MST705					2
//--------- TV System selection-----------
#define TV_NONE					0
#define TV_NTSC					1
#define TV_PAL					2
#define TV_CHINA				3
//-----------PWM Define--------------------
#define PWM_TYPE_NONE			0
#define PWM_TYPE_PWM1			1
#define PWM_TYPE_PWM2			2
#define PWM_TYPE_PWM3			3
#define PWM_TYPE_PWM4			4
//-----------Tuner Define-------------------
#define TUNER_2IN1					1

#define TUNER_XUGUANG_JS_6H1_111	0
#define TUNER_PTI_5PF17M			1
#define TUNER_XUGUANG_VFT_5A_118	2
#define TUNER_XF_6A					3
#define TUNER_LG_TALN_Z200T			4
#define TUNER_LG_TALN_S200T			5

//-----------Panel Define-------------------
//analog panel
#define PanelLG07_AT		0
#define PanelAU07_AT		1
#define PanelPVI05_AT		2
#define PanelTMD07_AT       3
#define PanelPVI07_AT       4
#define PanelPVI08W_AT      5
#define PanelPVI10_AT       6
#define PanelLG065_AT       7
#define PanelPVI025_AT      8
#define PanelAU065W_AT      9
#define PanelCPT07_AT       10
#define PanelPVI08_AT       11
#define PanelPVI030_AT      12
#define PanelChiLin084_AT   13
#define PanelHSD09_AT       14


//digital panel --please don't change order
#define PanelSHARP08_DT		80
#define PanelLG064_DT		81
#define PanelSHARP09_DT		82
#define PanelAU102_DT		83
#define PanelINNPLUX08_DT   84
#define PanelINNOLUX0843_DT	85
#define PanelAT08TN52_D		86
#define PanelFG035_D		87
#define PanelKD040G1A1_DT	88
#define PanelHSD07_D		89
#define PNL_CM106_V                  90
#define PanelCMO_N10106_LVDS1024X600 91
#define PanelCMO_N10106_LVDS1024X768 92
#define PanelCPT12_LVDS		      93
#define PanelB089AW01_LVDS	      94
#define Pnl_A121EW02_LVDS         95
#define Pnl_HSD121PHW1_LVDS    96
#define Pnl_LP156WH2_LVDS         97
//-----------Key Define-------------------
#define Single_ADCKey			0
#define Dual_ADCKey				1

#define SAR0					_BIT0
#define SAR1					_BIT1
#define SAR2					_BIT2

//-----------IR Define-------------------
#define IR_NEC      			0
#define IR_RC5      			1
#define IR_SANYO				2
#define IR_FORMAT               IR_NEC

//-----------Misc Define-------------------
#define SOG_ENABLE              0
#define ENABLE_DDC2BI           0
#define IRSEND_ENABLE		    1

//---------Game\Calendar define-------------
#define GAME_ENABLE		 		0
#define CALENDAR_ENABLE			0

//--------System boot up quickly define------------------------
#define  SYSTEM_BOOT_UP_QUICKLY_ENABLE   0

//-------------------------------
#define ENABLE_VD_32FSC	1
//-------------------------------------------------------
#if(BD_TYPE==BD_DEMO_702)
#include "Bd_demo_702.h"
#elif(BD_TYPE==BD_DEMO_703)
#include "Bd_demo_703.h"
#elif(BD_TYPE==BD_DEMO_705)
#include "Bd_demo_705.h"
#endif


#ifndef VCOM_DC_Ctrl
#define VCOM_DC_Ctrl    PWM_TYPE_NONE
#endif

//RD feedback, NEW ADC structure doesn't need offset caliberation,
#ifndef ENABLE_FW_ADC_OFFSET
#define ENABLE_FW_ADC_OFFSET		0
#endif

//-------------------------------------------------------
#define Enable_Logo_Display			0
//-------------------------------------------------------
#define ENABLE_MCU_USE_INTERNAL_CLOCK   1// 12M--->27M
#define ENABLE_WATCH_DOG    			1
//-------------------------------------------------------
#define ENABLE_V_PRE_SCALING_DOWN       1
//-------------------------------------------------------
#define ENABLE_CBCR			    1
#define UsePWMBrightness	    0
//-------------------------------------------------------
#define ENABLE_MONITOR_VTOTAL   0
//-------------------------------------------------------
#define INT_PERIOD			    1
#define UseIsr				    1

#define SystemTick			    10 //1s//10
#define T100MsTick			    50//100

#define GameTick			    2000
#define GameFastTick		    500

#define SERIAL_BAUD_RATE	    9600

#if ENABLE_MCU_USE_INTERNAL_CLOCK
//#define MCU_CLOCK_DIVIDER   6 // => 216/6=36MHz: This speed is too fast for serial flash
#define MCU_CLOCK_DIVIDER   8 // => 216/8=27MHz
//#define MCU_CLOCK_DIVIDER   10 // => 216/10=21.6MHz
//#define MCU_CLOCK_DIVIDER   12 // => 216/12=18MHz
//#define MCU_CLOCK_DIVIDER   14 // => 216/14=15.4MHz
//#define MCU_CLOCK_DIVIDER   16 // => 216/16=13.5MHz
#define BK0_EE_VAL          (0x80|(((MCU_CLOCK_DIVIDER-4)/2)<<4))

#define NEW_MCU_XTAL_CLK_HZ  (216000000ul/MCU_CLOCK_DIVIDER)
#define NEW_MCU_XTAL_CLK_KHZ (NEW_MCU_XTAL_CLK_HZ/1000)
#define NEW_MCU_XTAL_CLK_MHZ (NEW_MCU_XTAL_CLK_KHZ/1000)
#endif

#define MCU_XTAL_CLK_HZ		12000000ul
#define MST_CLOCK_HZ		12000000ul

#define MST_CLOCK_KHZ		(MST_CLOCK_HZ/1000)
#define MST_CLOCK_MHZ		(MST_CLOCK_KHZ/1000)

#define MCU_XTAL_CLK_KHZ 	(MCU_XTAL_CLK_HZ / 1000)
#define MCU_XTAL_CLK_MHZ 	(MCU_XTAL_CLK_KHZ / 1000)

#if ENABLE_MCU_USE_INTERNAL_CLOCK
#define NEW_ISR_TIMER0_COUNTER	(65536-(NEW_MCU_XTAL_CLK_KHZ*ISR_TIMER0_INTERVAL+2)/4)
#endif

// 4 clock count
#define ISR_TIMER0_COUNTER      (65536-(MCU_XTAL_CLK_KHZ*ISR_TIMER0_INTERVAL+2)/4)

#if ENABLE_MCU_USE_INTERNAL_CLOCK
#define NEW_ISR_TIMER0_COUNTER  (65536-(NEW_MCU_XTAL_CLK_KHZ*ISR_TIMER0_INTERVAL+2)/4)
#endif

#define TIMER1_MODE2_DIVIDER    ((DWORD)SERIAL_BAUD_RATE*(32 * 4)) // 4 clock count
#define _SMOD       0

#define TIMER1_MODE2_TH1        (256-((DWORD)MCU_XTAL_CLK_HZ*_SMOD+MCU_XTAL_CLK_HZ+(TIMER1_MODE2_DIVIDER/2))/TIMER1_MODE2_DIVIDER)

#define MCU_MACHINE_CYCLE 12 	// unit: oscillatory cycle

#if ENABLE_MCU_USE_INTERNAL_CLOCK
#define MCU_MICROSECOND_NOP_NUM ((NEW_MCU_XTAL_CLK_MHZ + (MCU_MACHINE_CYCLE / 2)) / MCU_MACHINE_CYCLE)
#else
#define MCU_MICROSECOND_NOP_NUM ((MCU_XTAL_CLK_MHZ + (MCU_MACHINE_CYCLE / 2)) / MCU_MACHINE_CYCLE)
#endif

// MCU timer0
#define ISR_TIMER0_INTERVAL     1 // unit: 1ms

#define HFreq(hPeriod)			((DWORD)MST_CLOCK_KHZ*10+hPeriod/2)/hPeriod
#define VFreq(hFreq, vTotal)	((DWORD)hFreq*1000+vTotal/2)/vTotal

#define I2C_CHECK_PIN_TIME   	1000 // unit: 1 us
#define I2C_CHECK_PIN_CYCLE  	8    // cycle of check pin loopp
#define I2C_CHECK_PIN_DUMMY  	((I2C_CHECK_PIN_TIME / I2C_CHECK_PIN_CYCLE) * MCU_MICROSECOND_NOP_NUM)

#define NON_LINEAR_POINT_X0   0
#define NON_LINEAR_POINT_X1   30
#define NON_LINEAR_POINT_X2   50
#define NON_LINEAR_POINT_X3   80
#define NON_LINEAR_POINT_X4   100
#endif
/***********************************************************************************/