munices.c

来自「最新版的u-boot,2008-10-18发布」· C语言 代码 · 共 171 行

C
171
字号
/* * (C) Copyright 2007 * Heiko Schocher, DENX Software Engineering, hs@denx.de. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#include <common.h>#include <mpc5xxx.h>#include <pci.h>#include "mt48lc16m16a2-75.h"#ifndef CFG_RAMBOOTstatic void sdram_start (int hi_addr){	long hi_addr_bit = hi_addr ? 0x01000000 : 0;	/* unlock mode register */	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;	__asm__ volatile ("sync");	/* precharge all banks */	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;	__asm__ volatile ("sync");#if SDRAM_DDR	/* set mode register: extended mode */	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;	__asm__ volatile ("sync");	/* set mode register: reset DLL */	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;	__asm__ volatile ("sync");#endif	/* precharge all banks */	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;	__asm__ volatile ("sync");	/* auto refresh */	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;	__asm__ volatile ("sync");	/* set mode register */	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;	__asm__ volatile ("sync");	/* normal operation */	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;	__asm__ volatile ("sync");}#endif/* * ATTENTION: Although partially referenced initdram does NOT make real use *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE *            is something else than 0x00000000. */phys_size_t initdram (int board_type){	ulong dramsize = 0;	ulong dramsize2 = 0;#ifndef CFG_RAMBOOT	ulong test1, test2;	/* setup SDRAM chip selects */	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001b;/* 256MB at 0x0 */	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x10000000;/* disabled */	__asm__ volatile ("sync");	/* setup config registers */	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;	__asm__ volatile ("sync");#if SDRAM_DDR && SDRAM_TAPDELAY	/* set tap delay */	*(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;	__asm__ volatile ("sync");#endif	/* find RAM size using SDRAM CS0 only */	sdram_start(0);	test1 = (ulong )get_ram_size((long *)CFG_SDRAM_BASE, 0x10000000);	sdram_start(1);	test2 = (ulong )get_ram_size((long *)CFG_SDRAM_BASE, 0x10000000);	if (test1 > test2) {		sdram_start(0);		dramsize = test1;	} else {		dramsize = test2;	}	/* memory smaller than 1MB is impossible */	if (dramsize < (1 << 20)) {		dramsize = 0;	}	/* set SDRAM CS0 size according to the amount of RAM found */	if (dramsize > 0) {		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;	} else {		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */	}#else /* CFG_RAMBOOT */	/* retrieve size of memory connected to SDRAM CS0 */	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;	if (dramsize >= 0x13) {		dramsize = (1 << (dramsize - 0x13)) << 20;	} else {		dramsize = 0;	}	/* retrieve size of memory connected to SDRAM CS1 */	dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;	if (dramsize2 >= 0x13) {		dramsize2 = (1 << (dramsize2 - 0x13)) << 20;	} else {		dramsize2 = 0;	}#endif /* CFG_RAMBOOT */	return dramsize + dramsize2;}int checkboard (void){	puts ("Board: MUNICes\n");	return 0;}#ifdef	CONFIG_PCIstatic struct pci_controller hose;extern void pci_mpc5xxx_init(struct pci_controller *);void pci_init_board(void){	pci_mpc5xxx_init(&hose);}#endif#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)voidft_board_setup(void *blob, bd_t *bd){	ft_cpu_setup(blob, bd);}#endif

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?