cpu_init.c

来自「最新版的u-boot,2008-10-18发布」· C语言 代码 · 共 255 行

C
255
字号
/* Initializes CPU and basic hardware such as memory * controllers, IRQ controller and system timer 0. * * (C) Copyright 2007 * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * */#include <common.h>#include <asm/asi.h>#include <asm/leon.h>#include <ambapp.h>#include <config.h>DECLARE_GLOBAL_DATA_PTR;/* reset CPU (jump to 0, without reset) */void start(void);/* find & initialize the memory controller */int init_memory_ctrl(void);ambapp_dev_irqmp *irqmp = NULL;ambapp_dev_mctrl memctrl;ambapp_dev_gptimer *gptimer = NULL;unsigned int gptimer_irq = 0;int leon3_snooping_avail = 0;struct {	gd_t gd_area;	bd_t bd;} global_data;/* * Breath some life into the CPU... * * Set up the memory map, * initialize a bunch of registers. * * Run from FLASH/PROM: *  - until memory controller is set up, only registers avaiable *  - no global variables available for writing *  - constants avaiable */void cpu_init_f(void){	/* these varaiable must not be initialized */	ambapp_dev_irqmp *irqmp;	ambapp_apbdev apbdev;	register unsigned int apbmst;	/* find AMBA APB Master */	apbmst = (unsigned int)	    ambapp_ahb_next_nomem(VENDOR_GAISLER, GAISLER_APBMST, 1, 0);	if (!apbmst) {		/*		 * no AHB/APB bridge, something is wrong		 * ==> jump to start (or hang)		 */		while (1) ;	}	/* Init memory controller */	if (init_memory_ctrl()) {		while (1) ;	}	/****************************************************	 * From here we can use the main memory and the stack.	 */	/* Find AMBA APB IRQMP Controller */	if (ambapp_apb_first(VENDOR_GAISLER, GAISLER_IRQMP, &apbdev) != 1) {		/* no IRQ controller, something is wrong		 * ==> jump to start (or hang)		 */		while (1) ;	}	irqmp = (ambapp_dev_irqmp *) apbdev.address;	/* initialize the IRQMP */	irqmp->ilevel = 0xf;	/* all IRQ off */	irqmp->iforce = 0;	irqmp->ipend = 0;	irqmp->iclear = 0xfffe;	/* clear all old pending interrupts */	irqmp->cpu_mask[0] = 0;	/* mask all IRQs on CPU 0 */	irqmp->cpu_force[0] = 0;	/* no force IRQ on CPU 0 */	/* cache */}void cpu_init_f2(void){}/* * initialize higher level parts of CPU like time base and timers */int cpu_init_r(void){	ambapp_apbdev apbdev;	/*	 * Find AMBA APB IRQMP Controller,	 * When we come so far we know there is a IRQMP available	 */	ambapp_apb_first(VENDOR_GAISLER, GAISLER_IRQMP, &apbdev);	irqmp = (ambapp_dev_irqmp *) apbdev.address;	/* timer */	if (ambapp_apb_first(VENDOR_GAISLER, GAISLER_GPTIMER, &apbdev) != 1) {		printf("cpu_init_r: gptimer not found!\n");		return 1;	}	gptimer = (ambapp_dev_gptimer *) apbdev.address;	gptimer_irq = apbdev.irq;	/* initialize prescaler common to all timers to 1MHz */	gptimer->scalar = gptimer->scalar_reload =	    (((CONFIG_SYS_CLK_FREQ / 1000) + 500) / 1000) - 1;	return (0);}/* find & setup memory controller */int init_memory_ctrl(){	register ambapp_dev_mctrl *mctrl;	register ambapp_dev_sdctrl *sdctrl;	register ambapp_dev_ddrspa *ddrspa;	register ambapp_dev_ddr2spa *ddr2spa;	register ahbctrl_pp_dev *ahb;	register unsigned int base;	register int not_found_mctrl = -1;	/* find ESA Memory controller */	base = ambapp_apb_next_nomem(VENDOR_ESA, ESA_MCTRL, 0);	if (base) {		mctrl = (ambapp_dev_mctrl *) base;		/* config MCTRL memory controller */		mctrl->mcfg1 = CFG_GRLIB_MEMCFG1 | (mctrl->mcfg1 & 0x300);		mctrl->mcfg2 = CFG_GRLIB_MEMCFG2;		mctrl->mcfg3 = CFG_GRLIB_MEMCFG3;		not_found_mctrl = 0;	}	/* find Gaisler Fault Tolerant Memory controller */	base = ambapp_apb_next_nomem(VENDOR_GAISLER, GAISLER_FTMCTRL, 0);	if (base) {		mctrl = (ambapp_dev_mctrl *) base;		/* config MCTRL memory controller */		mctrl->mcfg1 = CFG_GRLIB_FT_MEMCFG1 | (mctrl->mcfg1 & 0x300);		mctrl->mcfg2 = CFG_GRLIB_FT_MEMCFG2;		mctrl->mcfg3 = CFG_GRLIB_FT_MEMCFG3;		not_found_mctrl = 0;	}	/* find SDRAM controller */	base = ambapp_apb_next_nomem(VENDOR_GAISLER, GAISLER_SDCTRL, 0);	if (base) {		sdctrl = (ambapp_dev_sdctrl *) base;		/* config memory controller */		sdctrl->sdcfg = CFG_GRLIB_SDRAM;		not_found_mctrl = 0;	}	ahb = ambapp_ahb_next_nomem(VENDOR_GAISLER, GAISLER_DDR2SPA, 1, 0);	if (ahb) {		ddr2spa = (ambapp_dev_ddr2spa *) ambapp_ahb_get_info(ahb, 1);		/* Config DDR2 memory controller */		ddr2spa->cfg1 = CFG_GRLIB_DDR2_CFG1;		ddr2spa->cfg3 = CFG_GRLIB_DDR2_CFG3;		not_found_mctrl = 0;	}	ahb = ambapp_ahb_next_nomem(VENDOR_GAISLER, GAISLER_DDRSPA, 1, 0);	if (ahb) {		ddrspa = (ambapp_dev_ddrspa *) ambapp_ahb_get_info(ahb, 1);		/* Config DDR memory controller */		ddrspa->ctrl = CFG_GRLIB_DDR_CFG;		not_found_mctrl = 0;	}	/* failed to find any memory controller */	return not_found_mctrl;}/* Uses Timer 0 to get accurate * pauses. Max 2 raised to 32 ticks * */void cpu_wait_ticks(unsigned long ticks){	unsigned long start = get_timer(0);	while (get_timer(start) < ticks) ;}/* initiate and setup timer0 interrupt to 1MHz * Return irq number for timer int or a negative number for * dealing with self */int timer_interrupt_init_cpu(void){	/* 1ms ticks */	gptimer->e[0].val = 0;	gptimer->e[0].rld = 999;	/* (((1000000 / 100) - 1)) */	gptimer->e[0].ctrl =	    (LEON3_GPTIMER_EN |	     LEON3_GPTIMER_RL | LEON3_GPTIMER_LD | LEON3_GPTIMER_IRQEN);	return gptimer_irq;}/* * This function is intended for SHORT delays only. */unsigned long cpu_usec2ticks(unsigned long usec){	/* timer set to 1kHz ==> 1 clk tick = 1 msec */	if (usec < 1000)		return 1;	return (usec / 1000);}unsigned long cpu_ticks2usec(unsigned long ticks){	/* 1tick = 1usec */	return ticks * 1000;}

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?