⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 swiotlb.c

📁 广州斯道2410普及版II的源代码
💻 C
字号:
/* * Dynamic DMA mapping support. * * This implementation is for IA-64 platforms that do not support * I/O TLBs (aka DMA address translation hardware). * Copyright (C) 2000 Asit Mallick <Asit.K.Mallick@intel.com> * Copyright (C) 2000 Goutham Rao <goutham.rao@intel.com> * * 00/12/13 davidm	Rename to swiotlb.c and add mark_clean() to avoid *			unnecessary i-cache flushing. */#include <linux/mm.h>#include <linux/module.h>#include <linux/pci.h>#include <linux/spinlock.h>#include <linux/string.h>#include <linux/types.h>#include <asm/io.h>#include <asm/pci.h>#include <asm/dma.h>#include <linux/init.h>#include <linux/bootmem.h>#define ALIGN(val, align) ((unsigned long)	\	(((unsigned long) (val) + ((align) - 1)) & ~((align) - 1)))#define SG_ENT_VIRT_ADDRESS(sg)	((sg)->address ? (sg)->address			\				 : page_address((sg)->page) + (sg)->offset)#define SG_ENT_PHYS_ADDRESS(SG)	virt_to_phys(SG_ENT_VIRT_ADDRESS(SG))/* * log of the size of each IO TLB slab.  The number of slabs is command line controllable. */#define IO_TLB_SHIFT 11/* * Used to do a quick range check in swiotlb_unmap_single and swiotlb_sync_single, to see * if the memory was in fact allocated by this API. */static char *io_tlb_start, *io_tlb_end;/* * The number of IO TLB blocks (in groups of 64) betweeen io_tlb_start and io_tlb_end. * This is command line adjustable via setup_io_tlb_npages. */static unsigned long io_tlb_nslabs = 1024;/* * This is a free list describing the number of free entries available from each index */static unsigned int *io_tlb_list;static unsigned int io_tlb_index;/* * We need to save away the original address corresponding to a mapped entry for the sync * operations. */static unsigned char **io_tlb_orig_addr;/* * Protect the above data structures in the map and unmap calls */static spinlock_t io_tlb_lock = SPIN_LOCK_UNLOCKED;static int __initsetup_io_tlb_npages (char *str){	io_tlb_nslabs = simple_strtoul(str, NULL, 0) << (PAGE_SHIFT - IO_TLB_SHIFT);	return 1;}__setup("swiotlb=", setup_io_tlb_npages);/* * Statically reserve bounce buffer space and initialize bounce buffer data structures for * the software IO TLB used to implement the PCI DMA API. */voidswiotlb_init (void){	int i;	/*	 * Get IO TLB memory from the low pages	 */	io_tlb_start = alloc_bootmem_low_pages(io_tlb_nslabs * (1 << IO_TLB_SHIFT));	if (!io_tlb_start)		BUG();	io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT);	/*	 * Allocate and initialize the free list array.  This array is used	 * to find contiguous free memory regions of size 2^IO_TLB_SHIFT between	 * io_tlb_start and io_tlb_end.	 */	io_tlb_list = alloc_bootmem(io_tlb_nslabs * sizeof(int));	for (i = 0; i < io_tlb_nslabs; i++)		io_tlb_list[i] = io_tlb_nslabs - i;	io_tlb_index = 0;	io_tlb_orig_addr = alloc_bootmem(io_tlb_nslabs * sizeof(char *));	printk("Placing software IO TLB between 0x%p - 0x%p\n",	       (void *) io_tlb_start, (void *) io_tlb_end);}/* * Allocates bounce buffer and returns its kernel virtual address. */static void *map_single (struct pci_dev *hwdev, char *buffer, size_t size, int direction){	unsigned long flags;	char *dma_addr;	unsigned int nslots, stride, index, wrap;	int i;	/*	 * For mappings greater than a page size, we limit the stride (and hence alignment)	 * to a page size.	 */	nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;	if (size > (1 << PAGE_SHIFT))		stride = (1 << (PAGE_SHIFT - IO_TLB_SHIFT));	else		stride = nslots;	if (!nslots)		BUG();	/*	 * Find suitable number of IO TLB entries size that will fit this request and	 * allocate a buffer from that IO TLB pool.	 */	spin_lock_irqsave(&io_tlb_lock, flags);	{		wrap = index = ALIGN(io_tlb_index, stride);		if (index >= io_tlb_nslabs)			wrap = index = 0;		do {			/*			 * If we find a slot that indicates we have 'nslots' number of			 * contiguous buffers, we allocate the buffers from that slot and			 * mark the entries as '0' indicating unavailable.			 */			if (io_tlb_list[index] >= nslots) {				int count = 0;				for (i = index; i < index + nslots; i++)					io_tlb_list[i] = 0;				for (i = index - 1; (i >= 0) && io_tlb_list[i]; i--)					io_tlb_list[i] = ++count;				dma_addr = io_tlb_start + (index << IO_TLB_SHIFT);				/*				 * Update the indices to avoid searching in the next round.				 */				io_tlb_index = ((index + nslots) < io_tlb_nslabs						? (index + nslots) : 0);				goto found;			}			index += stride;			if (index >= io_tlb_nslabs)				index = 0;		} while (index != wrap);		/*		 * XXX What is a suitable recovery mechanism here?  We cannot		 * sleep because we are called from with in interrupts!		 */		panic("map_single: could not allocate software IO TLB (%ld bytes)", size);	}  found:	spin_unlock_irqrestore(&io_tlb_lock, flags);	/*	 * Save away the mapping from the original address to the DMA address.  This is	 * needed when we sync the memory.  Then we sync the buffer if needed.	 */	io_tlb_orig_addr[index] = buffer;	if (direction == PCI_DMA_TODEVICE || direction == PCI_DMA_BIDIRECTIONAL)		memcpy(dma_addr, buffer, size);	return dma_addr;}/* * dma_addr is the kernel virtual address of the bounce buffer to unmap. */static voidunmap_single (struct pci_dev *hwdev, char *dma_addr, size_t size, int direction){	unsigned long flags;	int i, nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;	int index = (dma_addr - io_tlb_start) >> IO_TLB_SHIFT;	char *buffer = io_tlb_orig_addr[index];	/*	 * First, sync the memory before unmapping the entry	 */	if ((direction == PCI_DMA_FROMDEVICE) || (direction == PCI_DMA_BIDIRECTIONAL))		/*		 * bounce... copy the data back into the original buffer * and delete the		 * bounce buffer.		 */		memcpy(buffer, dma_addr, size);	/*	 * Return the buffer to the free list by setting the corresponding entries to	 * indicate the number of contigous entries available.  While returning the	 * entries to the free list, we merge the entries with slots below and above the	 * pool being returned.	 */	spin_lock_irqsave(&io_tlb_lock, flags);	{		int count = ((index + nslots) < io_tlb_nslabs ? io_tlb_list[index + nslots] : 0);		/*		 * Step 1: return the slots to the free list, merging the slots with		 * superceeding slots		 */		for (i = index + nslots - 1; i >= index; i--)			io_tlb_list[i] = ++count;		/*		 * Step 2: merge the returned slots with the preceeding slots, if		 * available (non zero)		 */		for (i = index - 1; (i >= 0) && io_tlb_list[i]; i--)			io_tlb_list[i] = ++count;	}	spin_unlock_irqrestore(&io_tlb_lock, flags);}static voidsync_single (struct pci_dev *hwdev, char *dma_addr, size_t size, int direction){	int index = (dma_addr - io_tlb_start) >> IO_TLB_SHIFT;	char *buffer = io_tlb_orig_addr[index];	/*	 * bounce... copy the data back into/from the original buffer	 * XXX How do you handle PCI_DMA_BIDIRECTIONAL here ?	 */	if (direction == PCI_DMA_FROMDEVICE)		memcpy(buffer, dma_addr, size);	else if (direction == PCI_DMA_TODEVICE)		memcpy(dma_addr, buffer, size);	else		BUG();}void *swiotlb_alloc_consistent (struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle){	unsigned long pci_addr;	int gfp = GFP_ATOMIC;	void *ret;	if (!hwdev || hwdev->dma_mask <= 0xffffffff)		gfp |= GFP_DMA; /* XXX fix me: should change this to GFP_32BIT or ZONE_32BIT */	ret = (void *)__get_free_pages(gfp, get_order(size));	if (!ret)		return NULL;	memset(ret, 0, size);	pci_addr = virt_to_phys(ret);	if (hwdev && (pci_addr & ~hwdev->dma_mask) != 0)		panic("swiotlb_alloc_consistent: allocated memory is out of range for PCI device");	*dma_handle = pci_addr;	return ret;}voidswiotlb_free_consistent (struct pci_dev *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle){	free_pages((unsigned long) vaddr, get_order(size));}/* * Map a single buffer of the indicated size for DMA in streaming mode.  The PCI address * to use is returned. * * Once the device is given the dma address, the device owns this memory until either * swiotlb_unmap_single or swiotlb_dma_sync_single is performed. */dma_addr_tswiotlb_map_single (struct pci_dev *hwdev, void *ptr, size_t size, int direction){	unsigned long pci_addr = virt_to_phys(ptr);	if (direction == PCI_DMA_NONE)		BUG();	/*	 * Check if the PCI device can DMA to ptr... if so, just return ptr	 */	if ((pci_addr & ~hwdev->dma_mask) == 0)		/*		 * Device is bit capable of DMA'ing to the buffer... just return the PCI		 * address of ptr		 */		return pci_addr;	/*	 * get a bounce buffer:	 */	pci_addr = virt_to_phys(map_single(hwdev, ptr, size, direction));	/*	 * Ensure that the address returned is DMA'ble:	 */	if ((pci_addr & ~hwdev->dma_mask) != 0)		panic("map_single: bounce buffer is not DMA'ble");	return pci_addr;}/* * Since DMA is i-cache coherent, any (complete) pages that were written via * DMA can be marked as "clean" so that update_mmu_cache() doesn't have to * flush them when they get mapped into an executable vm-area. */static voidmark_clean (void *addr, size_t size){	unsigned long pg_addr, end;	pg_addr = PAGE_ALIGN((unsigned long) addr);	end = (unsigned long) addr + size;	while (pg_addr + PAGE_SIZE <= end) {		struct page *page = virt_to_page(pg_addr);		set_bit(PG_arch_1, &page->flags);		pg_addr += PAGE_SIZE;	}}/* * Unmap a single streaming mode DMA translation.  The dma_addr and size must match what * was provided for in a previous swiotlb_map_single call.  All other usages are * undefined. * * After this call, reads by the cpu to the buffer are guarenteed to see whatever the * device wrote there. */voidswiotlb_unmap_single (struct pci_dev *hwdev, dma_addr_t pci_addr, size_t size, int direction){	char *dma_addr = phys_to_virt(pci_addr);	if (direction == PCI_DMA_NONE)		BUG();	if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end)		unmap_single(hwdev, dma_addr, size, direction);	else if (direction == PCI_DMA_FROMDEVICE)		mark_clean(dma_addr, size);}/* * Make physical memory consistent for a single streaming mode DMA translation after a * transfer. * * If you perform a swiotlb_map_single() but wish to interrogate the buffer using the cpu, * yet do not wish to teardown the PCI dma mapping, you must call this function before * doing so.  At the next point you give the PCI dma address back to the card, the device * again owns the buffer. */voidswiotlb_sync_single (struct pci_dev *hwdev, dma_addr_t pci_addr, size_t size, int direction){	char *dma_addr = phys_to_virt(pci_addr);	if (direction == PCI_DMA_NONE)		BUG();	if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end)		sync_single(hwdev, dma_addr, size, direction);	else if (direction == PCI_DMA_FROMDEVICE)		mark_clean(dma_addr, size);}/* * Map a set of buffers described by scatterlist in streaming mode for DMA.  This is the * scather-gather version of the above swiotlb_map_single interface.  Here the scatter * gather list elements are each tagged with the appropriate dma address and length.  They * are obtained via sg_dma_{address,length}(SG). * * NOTE: An implementation may be able to use a smaller number of *       DMA address/length pairs than there are SG table elements. *       (for example via virtual mapping capabilities) *       The routine returns the number of addr/length pairs actually *       used, at most nents. * * Device ownership issues as mentioned above for swiotlb_map_single are the same here. */intswiotlb_map_sg (struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction){	void *addr;	int i;	if (direction == PCI_DMA_NONE)		BUG();	for (i = 0; i < nelems; i++, sg++) {		sg->orig_address = SG_ENT_VIRT_ADDRESS(sg);		if ((SG_ENT_PHYS_ADDRESS(sg) & ~hwdev->dma_mask) != 0) {			addr = map_single(hwdev, sg->address, sg->length, direction);			if (sg->address)				sg->address = addr;			else				sg->page = virt_to_page(addr);		}	}	return nelems;}/* * Unmap a set of streaming mode DMA translations.  Again, cpu read rules concerning calls * here are the same as for swiotlb_unmap_single() above. */voidswiotlb_unmap_sg (struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction){	int i;	if (direction == PCI_DMA_NONE)		BUG();	for (i = 0; i < nelems; i++, sg++)		if (sg->orig_address != SG_ENT_VIRT_ADDRESS(sg)) {			unmap_single(hwdev, SG_ENT_VIRT_ADDRESS(sg), sg->length, direction);			if (sg->address)				sg->address = sg->orig_address;			else				sg->page = virt_to_page(sg->orig_address);		} else if (direction == PCI_DMA_FROMDEVICE)			mark_clean(sg->address, sg->length);}/* * Make physical memory consistent for a set of streaming mode DMA translations after a * transfer. * * The same as swiotlb_dma_sync_single but for a scatter-gather list, same rules and * usage. */voidswiotlb_sync_sg (struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction){	int i;	if (direction == PCI_DMA_NONE)		BUG();	for (i = 0; i < nelems; i++, sg++)		if (sg->orig_address != SG_ENT_VIRT_ADDRESS(sg))			sync_single(hwdev, SG_ENT_VIRT_ADDRESS(sg), sg->length, direction);}unsigned longswiotlb_dma_address (struct scatterlist *sg){	return SG_ENT_PHYS_ADDRESS(sg);}EXPORT_SYMBOL(swiotlb_init);EXPORT_SYMBOL(swiotlb_map_single);EXPORT_SYMBOL(swiotlb_unmap_single);EXPORT_SYMBOL(swiotlb_map_sg);EXPORT_SYMBOL(swiotlb_unmap_sg);EXPORT_SYMBOL(swiotlb_sync_single);EXPORT_SYMBOL(swiotlb_sync_sg);EXPORT_SYMBOL(swiotlb_dma_address);EXPORT_SYMBOL(swiotlb_alloc_consistent);EXPORT_SYMBOL(swiotlb_free_consistent);

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -