⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 pci.c

📁 广州斯道2410普及版II的源代码
💻 C
字号:
/* *  arch/mips/ddb5074/pci.c -- NEC DDB Vrc-5074 PCI access routines * *  Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com> *                     Albert Dorofeev <albert@sonycom.com> *                     Sony Software Development Center Europe (SDCE), Brussels */#include <linux/init.h>#include <linux/kernel.h>#include <linux/pci.h>#include <linux/types.h>#include <linux/sched.h>#include <linux/ioport.h>#include <asm/nile4.h>static u32 nile4_pre_pci_access0(int slot_num){	u32 pci_addr = 0;	u32 virt_addr = NILE4_PCI_CFG_BASE;	/* Set window 1 address 8000000 - 64 bit - 2 MB (PCI config space) */	nile4_set_pdar(NILE4_PCIW1, PHYSADDR(virt_addr), 0x00200000, 64, 0,		       0);	if (slot_num > 2)		pci_addr = 0x00040000 << slot_num;	else		virt_addr += 0x00040000 << slot_num;	nile4_set_pmr(NILE4_PCIINIT1, NILE4_PCICMD_CFG, pci_addr);	return virt_addr;}static void nile4_post_pci_access0(void){	/*	 * Set window 1 back to address 8000000 - 64 bit - 128 MB	 * (PCI IO space)	 */	nile4_set_pdar(NILE4_PCIW1, PHYSADDR(NILE4_PCI_MEM_BASE),		       0x08000000, 64, 1, 1);	nile4_set_pmr(NILE4_PCIINIT1, NILE4_PCICMD_MEM, 0);}static int nile4_pci_read_config_dword(struct pci_dev *dev,				       int where, u32 * val){	int slot_num, func_num;	u32 base;	/*	 *  For starters let's do configuration cycle 0 only (one bus only)	 */	if (dev->bus->number)		return PCIBIOS_FUNC_NOT_SUPPORTED;	slot_num = PCI_SLOT(dev->devfn);	func_num = PCI_FUNC(dev->devfn);	if (slot_num == 5) {		/*		 * This is Nile 4 and it will crash if we access it like other		 * devices		 */		*val = nile4_in32(NILE4_PCI_BASE + where);		return PCIBIOS_SUCCESSFUL;	}	base = nile4_pre_pci_access0(slot_num);	*val =	    *((volatile u32 *) (base + (func_num << 8) + (where & 0xfc)));	nile4_post_pci_access0();	return PCIBIOS_SUCCESSFUL;}static int nile4_pci_write_config_dword(struct pci_dev *dev, int where,					u32 val){	int slot_num, func_num;	u32 base;	/*	 * For starters let's do configuration cycle 0 only (one bus only)	 */	if (dev->bus->number)		return PCIBIOS_FUNC_NOT_SUPPORTED;	slot_num = PCI_SLOT(dev->devfn);	func_num = PCI_FUNC(dev->devfn);	if (slot_num == 5) {		/*		 * This is Nile 4 and it will crash if we access it like other		 * devices		 */		nile4_out32(NILE4_PCI_BASE + where, val);		return PCIBIOS_SUCCESSFUL;	}	base = nile4_pre_pci_access0(slot_num);	*((volatile u32 *) (base + (func_num << 8) + (where & 0xfc))) =	    val;	nile4_post_pci_access0();	return PCIBIOS_SUCCESSFUL;}static int nile4_pci_read_config_word(struct pci_dev *dev, int where,				      u16 * val){	int status;	u32 result;	status = nile4_pci_read_config_dword(dev, where, &result);	if (status != PCIBIOS_SUCCESSFUL)		return status;	if (where & 2)		result >>= 16;	*val = result & 0xffff;	return PCIBIOS_SUCCESSFUL;}static int nile4_pci_read_config_byte(struct pci_dev *dev, int where,				      u8 * val){	int status;	u32 result;	status = nile4_pci_read_config_dword(dev, where, &result);	if (status != PCIBIOS_SUCCESSFUL)		return status;	if (where & 1)		result >>= 8;	if (where & 2)		result >>= 16;	*val = result & 0xff;	return PCIBIOS_SUCCESSFUL;}static int nile4_pci_write_config_word(struct pci_dev *dev, int where,				       u16 val){	int status, shift = 0;	u32 result;	status = nile4_pci_read_config_dword(dev, where, &result);	if (status != PCIBIOS_SUCCESSFUL)		return status;	if (where & 2)		shift += 16;	result &= ~(0xffff << shift);	result |= val << shift;	return nile4_pci_write_config_dword(dev, where, result);}static int nile4_pci_write_config_byte(struct pci_dev *dev, int where,				       u8 val){	int status, shift = 0;	u32 result;	status = nile4_pci_read_config_dword(dev, where, &result);	if (status != PCIBIOS_SUCCESSFUL)		return status;	if (where & 2)		shift += 16;	if (where & 1)		shift += 8;	result &= ~(0xff << shift);	result |= val << shift;	return nile4_pci_write_config_dword(dev, where, result);}struct pci_ops nile4_pci_ops = {	nile4_pci_read_config_byte,	nile4_pci_read_config_word,	nile4_pci_read_config_dword,	nile4_pci_write_config_byte,	nile4_pci_write_config_word,	nile4_pci_write_config_dword};struct {	struct resource ram;	struct resource flash;	struct resource isa_io;	struct resource pci_io;	struct resource isa_mem;	struct resource pci_mem;	struct resource nile4;	struct resource boot;} ddb5074_resources = {	{ "RAM", 0x00000000, 0x03ffffff,	  IORESOURCE_MEM | PCI_BASE_ADDRESS_MEM_TYPE_64},	{ "Flash ROM", 0x04000000, 0x043fffff},	{ "Nile4 ISA I/O", 0x06000000, 0x060fffff},	{ "Nile4 PCI I/O", 0x06100000, 0x07ffffff},	{ "Nile4 ISA mem", 0x08000000, 0x08ffffff, IORESOURCE_MEM},	{ "Nile4 PCI mem", 0x09000000, 0x0fffffff, IORESOURCE_MEM},	{ "Nile4 ctrl", 0x1fa00000, 0x1fbfffff,	  IORESOURCE_MEM | PCI_BASE_ADDRESS_MEM_TYPE_64},	{ "Boot ROM", 0x1fc00000, 0x1fffffff}};static void __init ddb5074_pci_fixup(void){	struct pci_dev *dev;	pci_for_each_dev(dev) {		if (dev->vendor == PCI_VENDOR_ID_NEC &&		    dev->device == PCI_DEVICE_ID_NEC_NILE4) {			/*			 * The first 64-bit PCI base register should point to			 * the Nile4 control registers. Unfortunately this			 * isn't the case, so we fix it ourselves. This allows			 * the serial driver to find the UART.			 */			dev->resource[0] = ddb5074_resources.nile4;			request_resource(&iomem_resource,					 &dev->resource[0]);			/*			 * The second 64-bit PCI base register points to the			 * first memory bank. Unfortunately the address is			 * wrong, so we fix it (again).			 */			dev->resource[2] = ddb5074_resources.ram;			request_resource(&iomem_resource,					 &dev->resource[2]);		} else if (dev->vendor == PCI_VENDOR_ID_AL			   && dev->device == PCI_DEVICE_ID_AL_M7101) {			/*			 * It's nice to have the LEDs on the GPIO pins			 * available for debugging			 */			extern struct pci_dev *pci_pmu;			u8 t8;			pci_pmu = dev;	/* for LEDs D2 and D3 */			/* Program the lines for LEDs D2 and D3 to output */			nile4_pci_read_config_byte(dev, 0x7d, &t8);			t8 |= 0xc0;			nile4_pci_write_config_byte(dev, 0x7d, t8);			/* Turn LEDs D2 and D3 off */			nile4_pci_read_config_byte(dev, 0x7e, &t8);			t8 |= 0xc0;			nile4_pci_write_config_byte(dev, 0x7e, t8);		}	}}static void __init pcibios_fixup_irqs(void){	struct pci_dev *dev;	int slot_num;	pci_for_each_dev(dev) {		slot_num = PCI_SLOT(dev->devfn);		switch (slot_num) {		case 0:			dev->irq = nile4_to_irq(NILE4_INT_INTE);			break;		case 1:			dev->irq = nile4_to_irq(NILE4_INT_INTA);			break;		case 2:	/* slot 1 */			dev->irq = nile4_to_irq(NILE4_INT_INTA);			break;		case 3:	/* slot 2 */			dev->irq = nile4_to_irq(NILE4_INT_INTB);			break;		case 4:	/* slot 3 */			dev->irq = nile4_to_irq(NILE4_INT_INTC);			break;		case 5:			/*			 * Fixup so the serial driver can use the UART			 */			dev->irq = nile4_to_irq(NILE4_INT_UART);			break;		case 13:			dev->irq = nile4_to_irq(NILE4_INT_INTE);			break;		default:			break;		}	}}void __init pcibios_init(void){	printk("PCI: Probing PCI hardware\n");	ioport_resource.end = 0x1ffffff;	/*  32 MB */	iomem_resource.end = 0x1fffffff;	/* 512 MB */	/* `ram' and `nile4' are requested through the Nile4 pci_dev */	request_resource(&iomem_resource, &ddb5074_resources.flash);	request_resource(&iomem_resource, &ddb5074_resources.isa_io);	request_resource(&iomem_resource, &ddb5074_resources.pci_io);	request_resource(&iomem_resource, &ddb5074_resources.isa_mem);	request_resource(&iomem_resource, &ddb5074_resources.pci_mem);	request_resource(&iomem_resource, &ddb5074_resources.boot);	pci_scan_bus(0, &nile4_pci_ops, NULL);	ddb5074_pci_fixup();	pci_assign_unassigned_resources();	pcibios_fixup_irqs();}void __init pcibios_fixup_bus(struct pci_bus *bus){	bus->resource[1] = &ddb5074_resources.pci_mem;}char *pcibios_setup(char *str){	return str;}void __init pcibios_update_irq(struct pci_dev *dev, int irq){	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);}void __init pcibios_fixup_pbus_ranges(struct pci_bus *bus,				      struct pbus_set_ranges_data *ranges){	ranges->io_start -= bus->resource[0]->start;	ranges->io_end -= bus->resource[0]->start;	ranges->mem_start -= bus->resource[1]->start;	ranges->mem_end -= bus->resource[1]->start;}int pcibios_enable_resources(struct pci_dev *dev){	u16 cmd, old_cmd;	int idx;	struct resource *r;	/*	 *  Don't touch the Nile 4	 */	if (dev->vendor == PCI_VENDOR_ID_NEC &&	    dev->device == PCI_DEVICE_ID_NEC_NILE4) return 0;	pci_read_config_word(dev, PCI_COMMAND, &cmd);	old_cmd = cmd;	for (idx = 0; idx < 6; idx++) {		r = &dev->resource[idx];		if (!r->start && r->end) {			printk(KERN_ERR "PCI: Device %s not available because "			       "of resource collisions\n", dev->slot_name);			return -EINVAL;		}		if (r->flags & IORESOURCE_IO)			cmd |= PCI_COMMAND_IO;		if (r->flags & IORESOURCE_MEM)			cmd |= PCI_COMMAND_MEMORY;	}	if (cmd != old_cmd) {		printk("PCI: Enabling device %s (%04x -> %04x)\n",		       dev->slot_name, old_cmd, cmd);		pci_write_config_word(dev, PCI_COMMAND, cmd);	}	return 0;}int pcibios_enable_device(struct pci_dev *dev){	return pcibios_enable_resources(dev);}void pcibios_update_resource(struct pci_dev *dev, struct resource *root,			     struct resource *res, int resource){	u32 new, check;	int reg;	new = res->start | (res->flags & PCI_REGION_FLAG_MASK);	if (resource < 6) {		reg = PCI_BASE_ADDRESS_0 + 4 * resource;	} else if (resource == PCI_ROM_RESOURCE) {		res->flags |= PCI_ROM_ADDRESS_ENABLE;		reg = dev->rom_base_reg;	} else {		/*		 * Somebody might have asked allocation of a non-standard		 * resource		 */		return;	}	pci_write_config_dword(dev, reg, new);	pci_read_config_dword(dev, reg, &check);	if ((new ^ check) &	    ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK :	     PCI_BASE_ADDRESS_MEM_MASK)) {		printk(KERN_ERR "PCI: Error while updating region "		       "%s/%d (%08x != %08x)\n", dev->slot_name, resource,		       new, check);	}}void pcibios_align_resource(void *data, struct resource *res,			    unsigned long size){	struct pci_dev *dev = data;	if (res->flags & IORESOURCE_IO) {		unsigned long start = res->start;		/* We need to avoid collisions with `mirrored' VGA ports		   and other strange ISA hardware, so we always want the		   addresses kilobyte aligned.  */		if (size > 0x100) {			printk(KERN_ERR "PCI: I/O Region %s/%d too large"			       " (%ld bytes)\n", dev->slot_name,			       dev->resource - res, size);		}		start = (start + 1024 - 1) & ~(1024 - 1);		res->start = start;	}}unsigned __init int pcibios_assign_all_busses(void){	return 1;}struct pci_fixup pcibios_fixups[] = { };

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -