📄 f34x_msd_scsi.lst
字号:
257 =4 sbit NSSMD0 = 0xFA; // SPI0 slave select mode 0
258 =4 sbit TXBMT = 0xF9; // SPI0 transmit buffer emp
-ty
259 =4 sbit SPIEN = 0xF8; // SPI0 SPI enable
260 =4
261 =4
262 =4 //----------------------------------------------------------------
--------------
263 =4 // Interrupt Priorities
264 =4 //----------------------------------------------------------------
--------------
265 =4
266 =4 #define INTERRUPT_INT0 0 // External Interrupt 0
267 =4 #define INTERRUPT_TIMER0 1 // Timer0 Overflow
268 =4 #define INTERRUPT_INT1 2 // External Interrupt 1
269 =4 #define INTERRUPT_TIMER1 3 // Timer1 Overflow
270 =4 #define INTERRUPT_UART0 4 // Serial Port 0
271 =4 #define INTERRUPT_TIMER2 5 // Timer2 Overflow
272 =4 #define INTERRUPT_SPI0 6 // Serial Peripheral Interf
-ace 0
273 =4 #define INTERRUPT_SMBUS0 7 // SMBus0 Interface
274 =4 #define INTERRUPT_USB0 8 // USB Interface
275 =4 #define INTERRUPT_ADC0_WINDOW 9 // ADC0 Window Comparison
276 =4 #define INTERRUPT_ADC0_EOC 10 // ADC0 End Of Conversion
277 =4 #define INTERRUPT_PCA0 11 // PCA0 Peripheral
278 =4 #define INTERRUPT_COMPARATOR0 12 // Comparator0
279 =4 #define INTERRUPT_COMPARATOR1 13 // Comparator1
280 =4 #define INTERRUPT_TIMER3 14 // Timer3 Overflow
281 =4 #define INTERRUPT_VBUS_LEVEL 15 // VBUS level-triggered int
-errupt
282 =4 #define INTERRUPT_UART1 16 // Serial Port 1
283 =4
284 =4 //----------------------------------------------------------------
--------------
285 =4 // Header File PreProcessor Directive
286 =4 //----------------------------------------------------------------
--------------
287 =4
288 =4 #endif // #define C8051F340_H
289 =4
290 =4 //----------------------------------------------------------------
--------------
291 =4 // End Of File
292 =4 //----------------------------------------------------------------
--------------
36 =3 #ifdef DEBUG_TIMEOUTS
C51 COMPILER V7.50 F34X_MSD_SCSI 11/28/2006 10:54:24 PAGE 10
37 =3 sbit START_STOP_SPI = P3^0 ;
38 =3 sbit START_STOP_READ_TO = P3^1;
39 =3 sbit START_STOP_WRITE_TO = P3^2;
40 =3
41 =3 #define START_SPI_TIMEOUT (START_STOP_SPI = 1)
42 =3 #define STOP_SPI_TIME_OUT (START_STOP_SPI = 0)
43 =3 #define START_READ_COPY (START_STOP_READ_TO = 1)
44 =3 #define STOP_READ_COPY (START_STOP_READ_TO = 0)
45 =3 #define START_WRITE_COPY (START_STOP_WRITE_TO = 1)
46 =3 #define STOP_WRITE_COPY (START_STOP_WRITE_TO = 0)
47 =3 #else
=3
=3 #define START_SPI_TIMEOUT /\
=3 /
=3 #define STOP_SPI_TIME_OUT /\
=3 /
=3 #define START_READ_COPY /\
=3 /
=3 #define STOP_READ_COPY /\
=3 /
=3 #define START_WRITE_COPY /\
=3 /
=3 #define STOP_WRITE_COPY /\
=3 /
=3
=3 #endif
63 =3
64 =3 #define ENDLINE "\r\n"
65 =3 #define ENDLINE_SGN '\r'
66 =3
67 =3 #endif
37 =2 //#define _USB_LOW_SPEED_ // Change this comm
-ent to make Full/Low speed
38 =2
39 =2 #define SYSCLK 12000000 // SYSCLK frequency i
-n Hz
40 =2
41 =2 // USB clock selections (SFR CLKSEL)
42 =2 #define USB_4X_CLOCK 0x00 // Select 4x clock mu
-ltiplier, for USB Full Speed
43 =2 #define USB_INT_OSC_DIV_2 0x10 // See Data Sheet sec
-tion 13. Oscillators
44 =2 #define USB_EXT_OSC 0x20
45 =2 #define USB_EXT_OSC_DIV_2 0x30
46 =2 #define USB_EXT_OSC_DIV_3 0x40
47 =2 #define USB_EXT_OSC_DIV_4 0x50
48 =2
49 =2 // System clock selections (SFR CLKSEL)
50 =2 #define SYS_INT_OSC 0x00 // Select to use inte
-rnal oscillator
51 =2 #define SYS_4X_MUL 0x03 // Select to use inte
-rnal oscillator
52 =2 #define SYS_EXT_OSC 0x01 // Select to use an e
-xternal oscillator
53 =2 #define SYS_4X_DIV_2 0x02
54 =2
55 =2 // BYTE type definition
56 =2 #ifndef _BYTE_DEF_
57 =2 #define _BYTE_DEF_
58 =2 typedef unsigned char BYTE;
59 =2 #endif /* _BYTE_DEF_ */
60 =2
C51 COMPILER V7.50 F34X_MSD_SCSI 11/28/2006 10:54:24 PAGE 11
61 =2 // WORD type definition, for KEIL Compiler
62 =2 #ifndef _WORD_DEF_ // Compiler Specific,
- written for Little Endian
63 =2 #define _WORD_DEF_
64 =2 typedef union {unsigned int i; unsigned char c[2];} WORD;
65 =2 #define LSB 1 // All words sent to
-and received from the host are
66 =2 #define MSB 0 // little endian, thi
-s is switched by software when
67 =2 // neccessary. These
- sections of code have been marked
68 =2 // with "Compiler Specific" as above for easier modifi
-cation
69 =2 #endif /* _WORD_DEF_ */
70 =2
71 =2 // DWORD type definition
72 =2 #ifndef _DWORD_DEF_
73 =2 #define _DWORD_DEF_
74 =2 typedef unsigned long DWORD;
75 =2 #endif /* _DWORD_DEF_ */
76 =2
77 =2 extern volatile DWORD xdata tickcount;
78 =2
79 =2 // Define Endpoint Packet Sizes
80 =2 #ifdef _USB_LOW_SPEED_
=2 #define EP0_PACKET_SIZE 0x40 // This value can be
-8,16,32,64 depending on device speed, see USB spec
=2 #else
83 =2 #define EP0_PACKET_SIZE 0x40
84 =2 #endif /* _USB_LOW_SPEED_ */
85 =2
86 =2 #define EP1_PACKET_SIZE 0x0040 // Can range 0 - 1024
- depending on data and transfer type
87 =2 #define EP1_PACKET_SIZE_LE 0x4000 // IMPORTANT- this sh
-ould be Little-Endian version of EP1_PACKET_SIZE
88 =2 #define EP2_PACKET_SIZE 0x0040 // Can range 0 - 1024
- depending on data and transfer type
89 =2 #define EP2_PACKET_SIZE_LE 0x4000 // IMPORTANT- this sh
-ould be Little-Endian version of EP2_PACKET_SIZE
90 =2
91 =2 // Standard Descriptor Types
92 =2 #define DSC_DEVICE 0x01 // Device Descriptor
93 =2 #define DSC_CONFIG 0x02 // Configuration Desc
-riptor
94 =2 #define DSC_STRING 0x03 // String Descriptor
95 =2 #define DSC_INTERFACE 0x04 // Interface Descript
-or
96 =2 #define DSC_ENDPOINT 0x05 // Endpoint Descripto
-r
97 =2
98 =2 // HID Descriptor Types
99 =2 #define DSC_HID 0x21 // HID Class Descriptor
100 =2 #define DSC_HID_REPORT 0x22 // HID Report Descriptor
101 =2
102 =2 // Standard Request Codes
103 =2 #define GET_STATUS 0x00 // Code for Get Status
104 =2 #define CLEAR_FEATURE 0x01 // Code for Clear Feat
-ure
105 =2 #define SET_FEATURE 0x03 // Code for Set Featur
-e
106 =2 #define SET_ADDRESS 0x05 // Code for Set Addres
-s
C51 COMPILER V7.50 F34X_MSD_SCSI 11/28/2006 10:54:24 PAGE 12
107 =2 #define GET_DESCRIPTOR 0x06 // Code for Get Descri
-ptor
108 =2 #define SET_DESCRIPTOR 0x07 // Code for Set Descri
-ptor(not used)
109 =2 #define GET_CONFIGURATION 0x08 // Code for Get Config
-uration
110 =2 #define SET_CONFIGURATION 0x09 // Code for Set Config
-uration
111 =2 #define GET_INTERFACE 0x0A // Code for Get Interf
-ace
112 =2 #define SET_INTERFACE 0x0B // Code for Set Interf
-ace
113 =2 #define SYNCH_FRAME 0x0C // Code for Synch Fram
-e(not used)
114 =2 #define MSD_RESET 0xFF // Mass-storage device Reset
115 =2 #define MSD_GET_MAX_LUN 0xFE // Mass-storage device Get Max LU
-N
116 =2
117 =2 // HID Request Codes
118 =2 #define GET_REPORT 0x01 // Code for Get Report
119 =2 #define GET_IDLE 0x02 // Code for Get Idle
120 =2 #define GET_PROTOCOL 0x03 // Code for Get Protocol
121 =2 #define SET_REPORT 0x09 // Code for Set Report
122 =2 #define SET_IDLE 0x0A // Code for Set Idle
123 =2 #define SET_PROTOCOL 0x0B // Code for Set Protocol
124 =2
125 =2 // Define device states
126 =2 #define DEV_ATTACHED 0x00 // Device is in Attac
-hed State
127 =2 #define DEV_POWERED 0x01 // Device is in Power
-ed State
128 =2 #define DEV_DEFAULT 0x02 // Device is in Defau
-lt State
129 =2 #define DEV_ADDRESS 0x03 // Device is in Addre
-ssed State
130 =2 #define DEV_CONFIGURED 0x04 // Device is in Confi
-gured State
131 =2 #define DEV_SUSPENDED 0x05 // Device is in Suspe
-nded State
132 =2
133 =2 // Define bmRequestType bitmaps
134 =2 #define IN_DEVICE 0x00 // Request made to de
-vice, direction is IN
135 =2 #define OUT_DEVICE 0x80 // Request made to de
-vice, direction is OUT
136 =2 #define IN_INTERFACE 0x01 // Request made to in
-terface, direction is IN
137 =2 #define OUT_INTERFACE 0x81 // Request made to in
-terface, direction is OUT
138 =2 #define IN_ENDPOINT 0x02 // Request made to en
-dpoint, direction is IN
139 =2 #define OUT_ENDPOINT 0x82 // Request made to en
-dpoint, direction is OUT
140 =2
141 =2 // Define wIndex bitmaps
142 =2 #define IN_EP1 0x81 // Index values used
-by Set and Clear feature
143 =2 #define OUT_EP1 0x01 // commands for Endpo
-int_Halt
144 =2 #define IN_EP2 0x82
145 =2 #ifdef __F326_VER__
=2 #define OUT_EP2 0x01
C51 COMPILER V7.50 F34X_MSD_SCSI 11/28/2006 10:54:24 PAGE 13
=2 #else
148 =2 #define OUT_EP2 0x01
149 =2 #endif
150 =2
151 =2 // Define wValue bitmaps for Standard Feature Selectors
152 =2 #define DEVICE_REMOTE_WAKEUP 0x01 // Remote wakeup feat
-ure(not used)
153 =2 #define ENDPOINT_HALT 0x00 // Endpoint_Halt feat
-ure selector
154 =2
155 =2 // Define Endpoint States
156 =2 #define EP_IDLE 0x00 // This signifies End
-point Idle State
157 =2 #define EP_TX 0x01 // Endpoint Transmit
-State
158 =2 #define EP_RX 0x02 // Endpoint Receive S
-tate
159 =2 #define EP_HALT 0x03 // Endpoint Halt Stat
-e (return stalls)
160 =2 #define EP_STALL 0x04 // Endpoint Stall (se
-nd procedural stall next status phase)
161 =2 #define EP_ADDRESS 0x05 // Endpoint Address (
-change FADDR during next status phase)
162 =2
163 =2 // Function prototypes
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -