⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 uip-icmpinput.c

📁 這是一個實時嵌入式作業系統 實作了MCS51 ARM等MCU
💻 C
字号:
/**************************************************************************** * net/uip/uip-icmpinput.c * Handling incoming ICMP/ICMP6 input * *   Copyright (C) 2007 Gregory Nutt. All rights reserved. *   Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Adapted for NuttX from logic in uIP which also has a BSD-like license: * *   Original author Adam Dunkels <adam@dunkels.com> *   Copyright () 2001-2003, Adam Dunkels. *   All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright *    notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright *    notice, this list of conditions and the following disclaimer in the *    documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote *    products derived from this software without specific prior *    written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************//**************************************************************************** * Included Files ****************************************************************************/#include <nuttx/config.h>#ifdef CONFIG_NET#include <sys/types.h>#include <debug.h>#include <net/if.h>#include <net/uip/uipopt.h>#include <net/uip/uip.h>#include <net/uip/uip-arch.h>#include "uip-internal.h"/**************************************************************************** * Definitions ****************************************************************************/#define ICMPBUF ((struct uip_icmpip_hdr *)&dev->d_buf[UIP_LLH_LEN])/**************************************************************************** * Public Variables ****************************************************************************//**************************************************************************** * Private Variables ****************************************************************************//**************************************************************************** * Private Functions ****************************************************************************//**************************************************************************** * Public Functions ****************************************************************************//**************************************************************************** * Name: uip_icmpinput * * Description: *   Handle incoming ICMP/ICMP6 input * * Parameters: *   dev - The device driver structure containing the received ICMP/ICMP6 *         packet * * Return: *   None * * Assumptions: *   Called from the interrupt level or with interrupts disabled. * ****************************************************************************/void uip_icmpinput(struct uip_driver_s *dev){#ifdef CONFIG_NET_STATISTICS  uip_stat.icmp.recv++;#endif#ifndef CONFIG_NET_IPv6  /* ICMPv4 processing code follows. */  /* ICMP echo (i.e., ping) processing. This is simple, we only change the   * ICMP type from ECHO to ECHO_REPLY and adjust the ICMP checksum before   * we return the packet.   */  if (ICMPBUF->type != ICMP_ECHO)    {      ndbg("Unknown ICMP cmd: %d\n", ICMPBUF->type);      goto typeerr;    }  /* If we are configured to use ping IP address assignment, we use   * the destination IP address of this ping packet and assign it to   * ourself.   */#ifdef CONFIG_NET_PINGADDRCONF  if (dev->d_ipaddr == 0)    {      dev->d_ipaddr = ICMPBUF->destipaddr;    }#endif  ICMPBUF->type = ICMP_ECHO_REPLY;  if (ICMPBUF->icmpchksum >= HTONS(0xffff - (ICMP_ECHO << 8)))    {      ICMPBUF->icmpchksum += HTONS(ICMP_ECHO << 8) + 1;    }  else    {      ICMPBUF->icmpchksum += HTONS(ICMP_ECHO << 8);    }  /* Swap IP addresses. */  uiphdr_ipaddr_copy(ICMPBUF->destipaddr, ICMPBUF->srcipaddr);  uiphdr_ipaddr_copy(ICMPBUF->srcipaddr, &dev->d_ipaddr);  nvdbg("Outgoing ICMP packet length: %d (%d)\n",        dev->d_len, (ICMPBUF->len[0] << 8) | ICMPBUF->len[1]);#ifdef CONFIG_NET_STATISTICS  uip_stat.icmp.sent++;  uip_stat.ip.sent++;#endif  return;typeerr:#ifdef CONFIG_NET_STATISTICS  uip_stat.icmp.typeerr++;  uip_stat.icmp.drop++;#endif  dev->d_len = 0;#else /* !CONFIG_NET_IPv6 */  /* If we get a neighbor solicitation for our address we should send   * a neighbor advertisement message back.   */  if (ICMPBUF->type == ICMP6_NEIGHBOR_SOLICITATION)    {      if (uip_ipaddr_cmp(ICMPBUF->icmp6data, dev->d_ipaddr))        {          if (ICMPBUF->options[0] == ICMP6_OPTION_SOURCE_LINK_ADDRESS)            {              /* Save the sender's address in our neighbor list. */              uiphdr_neighbor_add(ICMPBUF->srcipaddr, &(ICMPBUF->options[2]));            }          /* We should now send a neighbor advertisement back to where the           * neighbor solicication came from.           */          ICMPBUF->type = ICMP6_NEIGHBOR_ADVERTISEMENT;          ICMPBUF->flags = ICMP6_FLAG_S; /* Solicited flag. */          ICMPBUF->reserved1 = ICMPBUF->reserved2 = ICMPBUF->reserved3 = 0;          uiphdr_ipaddr_copy(ICMPBUF->destipaddr, ICMPBUF->srcipaddr);          uiphdr_ipaddr_copy(ICMPBUF->srcipaddr, &dev->d_ipaddr);          ICMPBUF->options[0] = ICMP6_OPTION_TARGET_LINK_ADDRESS;          ICMPBUF->options[1] = 1;  /* Options length, 1 = 8 bytes. */          memcpy(&(ICMPBUF->options[2]), &dev->d_mac, IFHWADDRLEN);          ICMPBUF->icmpchksum = 0;          ICMPBUF->icmpchksum = ~uip_icmp6chksum(dev);        }      else        {          goto drop;        }    }  else if (ICMPBUF->type == ICMP6_ECHO)    {      /* ICMP echo (i.e., ping) processing. This is simple, we only       * change the ICMP type from ECHO to ECHO_REPLY and update the       * ICMP checksum before we return the packet.       */      ICMPBUF->type = ICMP6_ECHO_REPLY;      uiphdr_ipaddr_copy(ICMPBUF->destipaddr, ICMPBUF->srcipaddr);      uiphdr_ipaddr_copy(ICMPBUF->srcipaddr, &dev->d_ipaddr);      ICMPBUF->icmpchksum = 0;      ICMPBUF->icmpchksum = ~uip_icmp6chksum(dev);    }  else    {      ndbg("Unknown ICMP6 cmd: %d\n", ICMPBUF->type);      goto typeerr;    }  nvdbg("Outgoing ICMP6 packet length: %d (%d)\n",        dev->d_len, (ICMPBUF->len[0] << 8) | ICMPBUF->len[1]);#ifdef CONFIG_NET_STATISTICS  uip_stat.icmp.sent++;  uip_stat.ip.sent++;#endif  return;typeerr:#ifdef CONFIG_NET_STATISTICS  uip_stat.icmp.typeerr++;#endifdrop:#ifdef CONFIG_NET_STATISTICS  uip_stat.icmp.drop++;#endif  dev->d_len = 0;#endif /* !CONFIG_NET_IPv6 */}#endif /* CONFIG_NET */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -