⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 up_uipdriver.c

📁 這是一個實時嵌入式作業系統 實作了MCS51 ARM等MCU
💻 C
字号:
/**************************************************************************** * up_uipdriver.c * *   Copyright (C) 2007 Gregory Nutt. All rights reserved. *   Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Based on code from uIP which also has a BSD-like license: * *   Copyright (c) 2001, Adam Dunkels. *   All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright *    notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright *    notice, this list of conditions and the following disclaimer in *    the documentation and/or other materials provided with the *    distribution. * 3. Neither the name NuttX nor the names of its contributors may be *    used to endorse or promote products derived from this software *    without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/#ifdef linux/**************************************************************************** * Included Files ****************************************************************************/#include <nuttx/config.h>#include <sys/types.h>#include <string.h>#include <sched.h>#include <nuttx/net.h>#include <net/ethernet.h>#include <net/uip/uip.h>#include <net/uip/uip-arch.h>#include <net/uip/uip-arp.h>#include "up_internal.h"/**************************************************************************** * Private Definitions ****************************************************************************/#define BUF ((struct ether_header*)g_sim_dev.d_buf)/**************************************************************************** * Private Types ****************************************************************************/struct timer{  uint32 interval;  uint32 start;};/**************************************************************************** * Private Function Prototypes ****************************************************************************//**************************************************************************** * Private Data ****************************************************************************/static struct timer g_periodic_timer;static struct uip_driver_s g_sim_dev;/**************************************************************************** * Private Functions ****************************************************************************/static void timer_set(struct timer *t, unsigned int interval){  t->interval = interval;  t->start    = up_getwalltime();}static boolean timer_expired( struct timer *t ){  return (up_getwalltime() - t->start) >= t->interval;}void timer_reset(struct timer *t){  t->start += t->interval;}#ifdef CONFIG_NET_PROMISCUOUS# define up_comparemac(a,b) (0)#elsestatic inline int up_comparemac(uint8 *paddr1, struct ether_addr *paddr2){  return memcmp(paddr1, paddr2->ether_addr_octet, ETHER_ADDR_LEN);}#endifstatic int sim_uiptxpoll(struct uip_driver_s *dev){  /* If the polling resulted in data that should be sent out on the network,   * the field d_len is set to a value > 0.   */  if (g_sim_dev.d_len > 0)    {      uip_arp_out(&g_sim_dev);      tapdev_send(g_sim_dev.d_buf, g_sim_dev.d_len);    }  /* If zero is returned, the polling will continue until all connections have   * been examined.   */  return 0;}/**************************************************************************** * Public Functions ****************************************************************************/void uipdriver_loop(void){  int i;  /* tapdev_read will return 0 on a timeout event and >0 on a data received event */  g_sim_dev.d_len = tapdev_read((unsigned char*)g_sim_dev.d_buf, CONFIG_NET_BUFSIZE);  /* Disable preemption through to the following so that it behaves a little more   * like an interrupt (otherwise, the following logic gets pre-empted an behaves   * oddly.   */  sched_lock();  if (g_sim_dev.d_len > 0)    {      /* Data received event.  Check for valid Ethernet header with destination == our       * MAC address       */      if (g_sim_dev.d_len > UIP_LLH_LEN && up_comparemac(BUF->ether_dhost, &g_sim_dev.d_mac) == 0)        {          /* We only accept IP packets of the configured type and ARP packets */#ifdef CONFIG_NET_IPv6          if (BUF->ether_type == htons(UIP_ETHTYPE_IP6))#else          if (BUF->ether_type == htons(UIP_ETHTYPE_IP))#endif            {              uip_arp_ipin();              uip_input(&g_sim_dev);             /* If the above function invocation resulted in data that              * should be sent out on the network, the global variable              * d_len is set to a value > 0.              */              if (g_sim_dev.d_len > 0)                {                  uip_arp_out(&g_sim_dev);                  tapdev_send(g_sim_dev.d_buf, g_sim_dev.d_len);                }            }          else if (BUF->ether_type == htons(UIP_ETHTYPE_ARP))            {              uip_arp_arpin(&g_sim_dev);              /* If the above function invocation resulted in data that               * should be sent out on the network, the global variable               * d_len is set to a value > 0.               */              if (g_sim_dev.d_len > 0)                {                  tapdev_send(g_sim_dev.d_buf, g_sim_dev.d_len);                }            }        }    }  /* Otherwise, it must be a timeout event */  else if (timer_expired(&g_periodic_timer))    {      timer_reset(&g_periodic_timer);      uip_timer(&g_sim_dev, sim_uiptxpoll, 1);    }  sched_unlock();}int uipdriver_init(void){  /* Internal initalization */  timer_set(&g_periodic_timer, 500);  tapdev_init();  (void)tapdev_getmacaddr(g_sim_dev.d_mac.ether_addr_octet);  /* Register the device with the OS so that socket IOCTLs can be performed */  (void)netdev_register(&g_sim_dev);  return OK;}#endif /* linux */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -