⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 makefile.zdsii

📁 這是一個實時嵌入式作業系統 實作了MCS51 ARM等MCU
💻 ZDSII
字号:
############################################################################# arch/z16/src/Makefile##   Copyright (C) 2008 Gregory Nutt. All rights reserved.#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>## Redistribution and use in source and binary forms, with or without# modification, are permitted provided that the following conditions# are met:## 1. Redistributions of source code must retain the above copyright#    notice, this list of conditions and the following disclaimer.# 2. Redistributions in binary form must reproduce the above copyright#    notice, this list of conditions and the following disclaimer in#    the documentation and/or other materials provided with the#    distribution.# 3. Neither the name NuttX nor the names of its contributors may be#    used to endorse or promote products derived from this software#    without specific prior written permission.## THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE# POSSIBILITY OF SUCH DAMAGE.########################################################################################################################################################## ToolsARCHSRCDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/srcWARCHSRCDIR	= ${shell cygpath -w $(ARCHSRCDIR)}USRINCLUDES	= -usrinc:'.;$(WTOPDIR)\sched;$(WARCHSRCDIR);$(WARCHSRCDIR)\common'INCLUDES	= $(ARCHSTDINCLUDES) $(USRINCLUDES)CFLAGS		= $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(INCLUDES) $(ARCHDEFINES)CPPFLAGS	+= -I$(ARCHSRCDIR) -I$(ZDSSTDINCDIR) -I$(ZDSZILOGINCDIR)LDFLAGS 	= @"${shell cygpath -w $(ARCHSRCDIR)/nuttx.linkcmd}"############################################################################# Files and directoriesifneq ($(HEAD_SSRC),)HEAD_GENSRC	= $(HEAD_SSRC:.S=$(ASMEXT))HEAD_AOBJ	= $(HEAD_SSRC:.S=$(OBJEXT))elseHEAD_AOBJ	= $(HEAD_ASRC:$(ASMEXT)=$(OBJEXT))endifSSRCS		= $(CHIP_SSRCS) $(CMN_SSRCS)ASRCS		= $(CHIP_ASRCS) $(CMN_ASRCS)GENSRCS		= $(SSRCS:.S=$(ASMEXT))AOBJS		= $(SSRCS:.S=$(OBJEXT)) $(ASRCS:$(ASMEXT)=$(OBJEXT))CSRCS		= $(CHIP_CSRCS) $(CMN_CSRCS)COBJS		= $(CSRCS:.c=$(OBJEXT))DEPSRCS 	= $(SSRCS) $(CSRCS)OBJS		= $(AOBJS) $(COBJS)BOARDDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/src/boardVPATH		= chip:common############################################################################# Targetsall: $(HEAD_OBJ) libarch$(LIBEXT)$(HEAD_GENSRC) $(GENSRCS) : %$(ASMEXT): %.S	@$(CPP) $(CPPFLAGS) $< -o $@.tmp	@cat $@.tmp | sed -e "s/^#/;/g" > $@	@rm $@.tmp$(AOBJS) $(HEAD_AOBJ): %$(OBJEXT): %$(ASMEXT)	$(call ASSEMBLE, `cygpath -w $<`, $@)$(COBJS): %$(OBJEXT): %.c	$(call COMPILE, `cygpath -w $<`, $@)libarch$(LIBEXT): $(OBJS)	@( for obj in $(OBJS) ; do \		$(call ARCHIVE, $@, $${obj}); \	done ; )board/libboard$(LIBEXT):	@$(MAKE) -C board TOPDIR="$(TOPDIR)" libboard$(LIBEXT)nuttx.linkcmd: $(LINKCMDTEMPLATE)	@cp -f $(LINKCMDTEMPLATE) nuttx.linkcmd	@echo "\"${shell cygpath -w $(TOPDIR)/nuttx}\"= \\" >>nuttx.linkcmd	@echo "  \"${shell cygpath -w $(ARCHSRCDIR)/$(HEAD_AOBJ)}\", \\" >>nuttx.linkcmd	@( for lib in $(LINKLIBS); do \		echo "  \"`cygpath -w $(TOPDIR)/$${lib}`\", \\" >>nuttx.linkcmd; \	done ; )	@echo "  \"${shell cygpath -w $(ARCHSRCDIR)/board/libboard$(LIBEXT)}\", \\"  >>nuttx.linkcmdifeq ($(CONFIG_ARCH_CHIP_Z8F640X),y)	@echo "  \"${shell cygpath -w $(ZDSSTDLIBDIR)/chelprevaaD$(LIBEXT)}\", \\"  >>nuttx.linkcmd	@echo "  \"${shell cygpath -w $(ZDSSTDLIBDIR)/crtrevaaLDD$(LIBEXT)}\", \\"  >>nuttx.linkcmd	@echo "  \"${shell cygpath -w $(ZDSSTDLIBDIR)/fprevaaLDD$(LIBEXT)}\", \\"  >>nuttx.linkcmd	@echo "  \"${shell cygpath -w $(ZDSZILOGLIBDIR)/csiorevaaLDD$(LIBEXT)}\", \\"  >>nuttx.linkcmd	@echo "  \"${shell cygpath -w $(ZDSZILOGLIBDIR)/zsldevinitdummy$(LIBEXT)}\""  >>nuttx.linkcmdendififeq ($(CONFIG_ARCH_CHIP_Z8F642X),y)	@echo "  \"${shell cygpath -w $(ZDSSTDLIBDIR)/chelpD$(LIBEXT)}\", \\"  >>nuttx.linkcmd	@echo "  \"${shell cygpath -w $(ZDSSTDLIBDIR)/crtLDD$(LIBEXT)}\", \\"  >>nuttx.linkcmd	@echo "  \"${shell cygpath -w $(ZDSSTDLIBDIR)/fpdumyLD$(LIBEXT)}\", \\"  >>nuttx.linkcmd	@echo "  \"${shell cygpath -w $(ZDSZILOGLIBDIR)/csioLDD$(LIBEXT)}\", \\"  >>nuttx.linkcmd	@echo "  \"${shell cygpath -w $(ZDSZILOGLIBDIR)/zsldevinitdummy$(LIBEXT)}\""  >>nuttx.linkcmdendififeq ($(CONFIG_ARCH_CHIP_EZ80F91),y)	@echo "  \"${shell cygpath -w $(ZDSSTDLIBDIR)/chelp$(LIBEXT)}\", \\"  >>nuttx.linkcmd	@echo "  \"${shell cygpath -w $(ZDSSTDLIBDIR)/crt$(LIBEXT)}\", \\"  >>nuttx.linkcmd	@echo "  \"${shell cygpath -w $(ZDSSTDLIBDIR)/fplib$(LIBEXT)}\", \\"  >>nuttx.linkcmd	@echo "  \"${shell cygpath -w $(ZDSZILOGLIBDIR)/gpio$(LIBEXT)}\", \\"  >>nuttx.linkcmd	@echo "  \"${shell cygpath -w $(ZDSZILOGLIBDIR)/uartf91$(LIBEXT)}\""  >>nuttx.linkcmdendifnuttx$(EXEEXT): $(HEAD_AOBJ) board/libboard$(LIBEXT) nuttx.linkcmd	@echo "LD:  nuttx.hex"	@$(LD) $(LDFLAGS).depend: Makefile chip/Make.defs $(DEPSRCS)	@if [ -e board/Makefile ]; then \		$(MAKE) -C board TOPDIR="$(TOPDIR)" depend ; \	fi	@$(MKDEP) --dep-path chip --dep-path common $(CC) -- $(CFLAGS) -- $(DEPSRCS) >Make.dep	@touch $@depend: .dependclean:	@if [ -e board/Makefile ]; then \		$(MAKE) -C board TOPDIR="$(TOPDIR)" clean ; \	fi	@rm -f libarch$(LIBEXT) *~ .*.swp	@rm -f nuttx.linkcmd *.asm *.tmp *.map	$(call CLEAN)distclean: clean	@if [ -e board/Makefile ]; then \		$(MAKE) -C board TOPDIR="$(TOPDIR)" distclean ; \	fi	@rm -f Make.dep .depend-include Make.dep

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -