up_reprioritizertr.c

這是一個實時嵌入式作業系統 實作了MCS51 ARM等MCU

/****************************************************************************
 * common/up_reprioritizertr.c
 *
 *   Copyright (C) 2008 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <[e-mail]>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <sys/types.h>
#include <sched.h>
#include <debug.h>

#include <nuttx/arch.h>

#include "chip/chip.h"
#include "os_internal.h"
#include "up_internal.h"

/****************************************************************************
 * Private Definitions
 ****************************************************************************/

/****************************************************************************
 * Private Data
 ****************************************************************************/

/****************************************************************************
 * Private Functions
 ****************************************************************************/

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: up_reprioritize_rtr
 *
 * Description:
 *   Called when the priority of a running or
 *   ready-to-run task changes and the reprioritization will 
 *   cause a context switch.  Two cases:
 *
 *   1) The priority of the currently running task drops and the next
 *      task in the ready to run list has priority.
 *   2) An idle, ready to run task's priority has been raised above the
 *      the priority of the current, running task and it now has the
 *      priority.
 *
 * Inputs:
 *   tcb: The TCB of the task that has been reprioritized
 *   priority: The new task priority
 *
 ****************************************************************************/

void up_reprioritize_rtr(FAR _TCB *tcb, ubyte priority)
{
  /* Verify that the caller is sane */

  if (tcb->task_state < FIRST_READY_TO_RUN_STATE ||
      tcb->task_state > LAST_READY_TO_RUN_STATE ||
      priority < SCHED_PRIORITY_MIN || 
      priority > SCHED_PRIORITY_MAX)
    {
       PANIC(OSERR_BADREPRIORITIZESTATE);
    }
  else
    {
      FAR _TCB *rtcb = (FAR _TCB*)g_readytorun.head;
      boolean switch_needed;

      slldbg("TCB=%p PRI=%d\n", tcb, priority);

      /* Remove the tcb task from the ready-to-run list.
       * sched_removereadytorun will return TRUE if we just
       * remove the head of the ready to run list.
       */

      switch_needed = sched_removereadytorun(tcb);

      /* Setup up the new task priority */

      tcb->sched_priority = (ubyte)priority;

      /* Return the task to the specified blocked task list.
       * sched_addreadytorun will return TRUE if the task was
       * added to the new list.  We will need to perform a context
       * switch only if the EXCLUSIVE or of the two calls is non-zero
       * (i.e., one and only one the calls changes the head of the
       * ready-to-run list).
       */

      switch_needed ^= sched_addreadytorun(tcb);

      /* Now, perform the context switch if one is needed */

      if (switch_needed)
        {
          /* If we are going to do a context switch, then now is the right
           * time to add any pending tasks back into the ready-to-run list.
           * task list now
           */

          if (g_pendingtasks.head)
            {
              sched_mergepending();
            }

          /* Are we in an interrupt handler? */

          if (IN_INTERRUPT)
            {
              /* Yes, then we have to do things differently.
               * Just copy the current context into the OLD rtcb.
               */

               SAVE_IRQCONTEXT(rtcb);

              /* Restore the exception context of the rtcb at the (new) head 
               * of the g_readytorun task list.
               */

              rtcb = (FAR _TCB*)g_readytorun.head;
              slldbg("New Active Task TCB=%p\n", rtcb);

              /* Then setup so that the context will be performed on exit
               * from the interrupt.
               */

               SET_IRQCONTEXT(rtcb);
            }

          /* Copy the exception context into the TCB at the (old) head of the
           * g_readytorun Task list. if SAVE_USERCONTEXT returns a non-zero
           * value, then this is really the previously running task restarting!
           */

          else if (!SAVE_USERCONTEXT(rtcb))
            {
              /* Restore the exception context of the rtcb at the (new) head 
               * of the g_readytorun task list.
               */

              rtcb = (FAR _TCB*)g_readytorun.head;
              slldbg("New Active Task TCB=%p\n", rtcb);

              /* Then switch contexts */

              RESTORE_USERCONTEXT(rtcb);
            }
        }
    }
}