📄 sdhal.h
字号:
/****************************************Copyright (c)**************************************************
** Co.,LTD.
**
** http://
**
**--------------File Info-------------------------------------------------------------------------------
** File name: sdhal.h
** Last modified Date: 2007-10-15
** Last Version: V2.0
** Descriptions: SD/MMC卡读写模块 ---- SPI操作函数头文件
** Soft Packet of SD/MMC Card: hard abstrast layer ---- function of SPI operation
** header file
**------------------------------------------------------------------------------------------------------
** Created by: lhlzjut@hotmail.com
** Created date: 2007-10-15
** Version: V1.0
** Descriptions: The original version
**
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
#ifndef __SDHAL_H__
#define __SDHAL_H__
#include "sdconfig.h"
/* 检测卡是否完全插入 check weather card is insert entirely */
extern INT8U SD_ChkCard(void);
/* 检测卡是否写保护 check weather card is write protect */
extern INT8U SD_ChkCardWP(void);
/* 初始化访问SD卡的硬件初始化 initialize the hardware that access sd card */
extern void SD_HardWareInit(void);
/* 设置SPI的时钟小于400kHZ set the clock of SPI less than 400kHZ */
extern void SPI_Clk400k(void);
/* 设置SPI的clock到最大值 set the clock of SPI to maximum */
extern void SPI_ClkToMax(void);
/* 通过SPI接口发送一个字节 send a byte by SPI interface */
extern void SPI_SendByte(INT8U byte);
/* 从SPI接口接收一个字节 receive a byte from SPI interface */
extern INT8U SPI_RecByte(void);
/* 片选SPI从机 select the SPI slave */
extern void SPI_CS_Assert(void);
/* 不片选SPI从机 not select the SPI slave */
extern void SPI_CS_Deassert(void);
#endif
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -