makefile.in

来自「Ubuntu packages of security software。 相」· IN 代码 · 共 203 行

export NMAP_VERSION = 4.20
NMAP_NAME= Nmap
NMAP_URL= http://insecure.org
NMAP_PLATFORM=@host@
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
sbindir = @sbindir@
mandir = @mandir@
srcdir = @srcdir@
nmapdatadir = @datadir@/nmap
deskdir = $(prefix)/share/applications

export NBASEDIR=@NBASEDIR@
export NSOCKDIR=@NSOCKDIR@
CC = @CC@
CXX = @CXX@
CCOPT = 
DBGFLAGS = 
LIBPCAPDIR = @libpcapdir@
LIBPCREDIR = @LIBPCREDIR@
export LIBDNETDIR = @LIBDNETDIR@
DEFS = @DEFS@ -DNMAP_VERSION=\"$(NMAP_VERSION)\" -DNMAP_NAME=\"$(NMAP_NAME)\" -DNMAP_URL=\"$(NMAP_URL)\" -DNMAP_PLATFORM=\"$(NMAP_PLATFORM)\" -DNMAPDATADIR=\"$(nmapdatadir)\"
# For mtrace debugging -- see MTRACE define in main.cc for instructions
# Should only be enabled during debugging and not in any real release.
# DEFS += -DMTRACE=1
CXXFLAGS = @CXXFLAGS@ $(DBGFLAGS) $(CCOPT) $(DEFS)
CPPFLAGS = @CPPFLAGS@
# CFLAGS = $(CXXFLAGS)
# CFLAGS = $(DEFS) $(INCLS)
STATIC =
LDFLAGS = @LDFLAGS@ $(DBGFLAGS) $(STATIC)
LIBS =  @LIBNBASE_LIBS@ @LIBNSOCK_LIBS@ @LIBPCRE_LIBS@ @LIBPCAP_LIBS@ @OPENSSL_LIBS@ @LIBDNET_LIBS@ @LIBS@
# LIBS =  -lefence @LIBS@
# LIBS =  -lrmalloc @LIBS@
SHTOOL = ./shtool
INSTALL = $(SHTOOL) install 
MAKEDEPEND = @MAKEDEPEND@
export RPMTDIR=$(HOME)/rpm


# DESTDIR is used by some package maintainers to install Nmap under
# its usual directory structure into a different tree.  See the 
# CHANGELOG for more info.
DESTDIR =

TARGET = nmap
TARGETNMAPFE=@TARGETNMAPFE@
INSTALLNMAPFE=@INSTALLNMAPFE@

export SRCS = main.cc nmap.cc targets.cc tcpip.cc nmap_error.cc utils.cc idle_scan.cc osscan.cc osscan2.cc output.cc scan_engine.cc timing.cc charpool.cc services.cc protocols.cc nmap_rpc.cc portlist.cc NmapOps.cc TargetGroup.cc Target.cc FingerPrintResults.cc service_scan.cc NmapOutputTable.cc MACLookup.cc nmap_tty.cc nmap_dns.cc @COMPAT_SRCS@

export HDRS = charpool.h FingerPrintResults.h global_structures.h idle_scan.h MACLookup.h nmap_amigaos.h nmap_dns.h nmap_error.h nmap.h NmapOps.h NmapOutputTable.h nmap_rpc.h nmap_tty.h nmap_winconfig.h osscan.h osscan2.h output.h portlist.h protocols.h scan_engine.h service_scan.h services.h TargetGroup.h Target.h targets.h tcpip.h timing.h utils.h

OBJS = main.o nmap.o targets.o tcpip.o nmap_error.o utils.o idle_scan.o osscan.o osscan2.o output.o scan_engine.o timing.o charpool.o services.o protocols.o nmap_rpc.o portlist.o NmapOps.o TargetGroup.o Target.o FingerPrintResults.o service_scan.o NmapOutputTable.o MACLookup.o nmap_tty.o nmap_dns.o @COMPAT_OBJS@

# %.o : %.cc -- nope this is a GNU extension
.cc.o:
	$(CXX) -c $(CPPFLAGS) $(CXXFLAGS) $< -o $@

all: $(TARGET) $(TARGETNMAPFE)

$(TARGET): $(DEPS) @PCAP_DEPENDS@ @PCRE_DEPENDS@ @DNET_DEPENDS@ $(NBASEDIR)/libnbase.a $(NSOCKDIR)/src/libnsock.a $(OBJS)
	@echo Compiling nmap
	rm -f $@
	$(CXX) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)

# This empty rule is used to force execution of certain rules where I can't conveniently specify
# all of the prerequisites (e.g. recursive makes and such)
FORCE:

$(LIBPCREDIR)/libpcre.a: $(LIBPCREDIR)/Makefile FORCE
	@echo Compiling libpcre; cd $(LIBPCREDIR) && $(MAKE)

$(LIBDNETDIR)/src/.libs/libdnet.a: $(LIBDNETDIR)/Makefile FORCE
	@echo Compiling libdnet; cd $(LIBDNETDIR) && $(MAKE)

$(LIBPCAPDIR)/libpcap.a: $(LIBPCAPDIR)/Makefile FORCE
	@echo Compiling libpcap; cd $(LIBPCAPDIR) && $(MAKE)

$(NBASEDIR)/libnbase.a: $(NBASEDIR)/Makefile FORCE
	@echo Compiling libnbase;
	cd $(NBASEDIR) && $(MAKE)

$(NSOCKDIR)/src/libnsock.a: $(NSOCKDIR)/src/Makefile FORCE
	@echo Compiling libnsock;
	cd $(NSOCKDIR)/src && $(MAKE)

#$(LIBPCAPDIR)/Makefile:
#	@echo Configuring libpcap; cd $(LIBPCAPDIR); ./configure

nmapfe/nmapfe: 
#	@echo "FAILURES HERE ARE OK -- THEY JUST MEAN YOU CANNOT USE nmapfe"
#	-rm -f nmapfe/Makefile
#	-cd nmapfe; ./configure;
	@if test -f nmapfe/Makefile; then echo "Building NmapFE graphical frontend"; cd nmapfe && $(MAKE) VERSION=$(NMAP_VERSION); else echo "NmapFE will not be made -- your system lacks the capabilities (perhaps GTK) for this graphical frontend.  You can still run command-line nmap!"; fi
#	-cd nmapfe; test -f Makefile && $(MAKE) VERSION=$(NMAP_VERSION) STATIC=$(STATIC);
#	@echo "END OF SECTION WHERE FAILURES ARE OK"

# Make a statically compiled binary for portability between distributions
static:
	$(MAKE) STATIC=-static

debug:
	$(MAKE) DBGFLAGS="-O0 -g -pg -ftest-coverage -fprofile-arcs"

# Make the Nmap tarball
distro:
	cd dev && $(MAKE) distro

# Update the web site
web:
	cd dev && $(MAKE) web

clean: @PCAP_CLEAN@ @PCRE_CLEAN@ @DNET_CLEAN@ nmapfe_clean nsock_clean nbase_clean my_clean

my_clean:
	rm -f dependencies.mk
	rm -f $(OBJS) $(TARGET) config.cache
pcap_clean:
	-cd $(LIBPCAPDIR) && $(MAKE) clean
pcre_clean:
	-cd $(LIBPCREDIR) && $(MAKE) clean
dnet_clean:
	-cd $(LIBDNETDIR) && $(MAKE) clean
nmapfe_clean:
	-cd nmapfe && $(MAKE) clean
nbase_clean:
	-cd $(NBASEDIR) && $(MAKE) clean
nsock_clean:
	-cd $(NSOCKDIR)/src && $(MAKE) clean
pcap_dist_clean:
	-cd $(LIBPCAPDIR) && $(MAKE) distclean
pcre_dist_clean:
	-cd $(LIBPCREDIR) && $(MAKE) distclean
dnet_dist_clean:
	-cd $(LIBDNETDIR) && $(MAKE) distclean
nmapfe_dist_clean:
	-cd nmapfe && $(MAKE) distclean
nbase_dist_clean:
	-cd $(NBASEDIR) && $(MAKE) distclean
nsock_dist_clean:
	-cd $(NSOCKDIR)/src && $(MAKE) distclean
debugclean:
	rm -f *.gcov *.gcda *.gcno gmon.out

distclean: my_clean my_distclean @PCAP_DIST_CLEAN@ @PCRE_DIST_CLEAN@ @DNET_DIST_CLEAN@ nmapfe_dist_clean nbase_dist_clean nsock_dist_clean

my_distclean:
	rm -f Makefile Makefile.bak makefile.dep config.h stamp-h stamp-h.in \
	         config.cache config.log config.status

install-nmap: $(TARGET)
	$(SHTOOL) mkdir -f -p -m 755 $(DESTDIR)$(bindir) $(DESTDIR)$(mandir)/man1 $(DESTDIR)$(nmapdatadir)
	$(INSTALL) -c -m 755 -s nmap $(DESTDIR)$(bindir)/nmap
	$(INSTALL) -c -m 644 docs/$(TARGET).1 $(DESTDIR)$(mandir)/man1/$(TARGET).1
	$(INSTALL) -c -m 644 docs/nmap.xsl $(DESTDIR)$(nmapdatadir)/
	$(INSTALL) -c -m 644 docs/nmap.dtd $(DESTDIR)$(nmapdatadir)/
	$(INSTALL) -c -m 644 nmap-services $(DESTDIR)$(nmapdatadir)/
	$(INSTALL) -c -m 644 nmap-rpc $(DESTDIR)$(nmapdatadir)/
	$(INSTALL) -c -m 644 nmap-os-fingerprints $(DESTDIR)$(nmapdatadir)/
	$(INSTALL) -c -m 644 nmap-os-db $(DESTDIR)$(nmapdatadir)/
	$(INSTALL) -c -m 644 nmap-service-probes $(DESTDIR)$(nmapdatadir)/
	$(INSTALL) -c -m 644 nmap-protocols $(DESTDIR)$(nmapdatadir)/
	$(INSTALL) -c -m 644 nmap-mac-prefixes $(DESTDIR)$(nmapdatadir)/

install-nmapfe: $(TARGETNMAPFE)
	$(SHTOOL) mkdir -f -p -m 755 $(DESTDIR)$(bindir) $(DESTDIR)$(mandir)/man1 $(DESTDIR)$(nmapdatadir) $(DESTDIR)$(deskdir)
	@echo "If the next command fails -- you cannot use the X front end"
	-test -f nmapfe/nmapfe && $(INSTALL) -c -m 755 -s nmapfe/nmapfe $(DESTDIR)$(bindir)/nmapfe && rm -f $(DESTDIR)$(bindir)/xnmap && $(SHTOOL) mkln -f -s $(DESTDIR)$(bindir)/nmapfe $(DESTDIR)$(bindir)/xnmap && $(INSTALL) -c -m 644 nmapfe.desktop $(DESTDIR)$(deskdir)/nmapfe.desktop && $(INSTALL) -c -m 644 docs/nmapfe.1 $(DESTDIR)$(mandir)/man1/nmapfe.1 && $(INSTALL) -c -m 644 docs/xnmap.1 $(DESTDIR)$(mandir)/man1/xnmap.1

install: install-nmap $(INSTALLNMAPFE)

uninstall:
	rm -f $(bindir)/$(TARGET) $(bindir)/nmapfe $(bindir)/xnmap
	rm -f $(deskdir)/nmapfe.desktop $(mandir)/man1/nmapfe.1
	rm -f $(mandir)/man1/xnmap.1 $(mandir)/man1/nmap.1
	rm -rf $(nmapdatadir) 

${srcdir}/configure: configure.ac 
	cd ${srcdir} && autoconf

## autoheader might not change config.h.in, so touch a stamp file.
#${srcdir}/config.h.in: stamp-h.in
#${srcdir}/stamp-h.in: configure.ac acconfig.h \
#	config.h.top config.h.bot
#	cd ${srcdir} && autoheader
#	echo timestamp > ${srcdir}/stamp-h.in
#
#config.h: stamp-h
#stamp-h: config.h.in config.status
#	./config.status

Makefile: Makefile.in config.status
	./config.status

config.status: configure
	./config.status --recheck

makefile.dep:
	$(CXX) -MM $(CXXFLAGS) $(CPPFLAGS) $(SRCS) > $@
include makefile.dep