rf.asm

汽车无钥进入系统设计,基于PIC单片机16F639,包括电路图和源码

;/*
;	RF.asm
;
;	Jan Ornter
;
;	DATE:	11-9-2005
;	VER.:	1.0
;
;	This class provides access to the optionally RF-Interface.
;	It will transmit a header (see below) and pulse with modulated data (see below).
;	
;	@timingdiagram Transmission frame
;	   |<                 Header                   >|<        Data            >|
;	   |<  Init >|< Gap >|<   High    >|<   Low    >|
;	    _________         _____________              _
;	___|         |_______|             |____________| XXXXXXXXXXXXXXXXXXXXXXXXX____
;
;	@timingdiagram A pwm coded '1'
;	 |<   T_STEP  >|<        2*T_STEP         >|
;	  _____________
;	_|             |___________________________|
;
;
;	@timingdiagram A pwm coded '0'
;	 |<        2*T_STEP         >|<   T_STEP  >|
;	  ___________________________
;	_|                           |_____________|
;
;*/



#include "Project.inc"
#include "Delay.inc"
#ifndef RF.PIN
	#define RF.PIN		5		; RF Modulation Output
	#define RF.PORT		PORTC
#endif

RF_ovr	udata_ovr
Parity			res 1
RF.COUNTER		res 1
RF.Byte_Counter	res 1
RF.Data_REG		res 1


	ifndef RF.T_HDR_INIT
;/*
;	The initial high time of the header in micro seconds.
;
;	@timingdiagram Transmission frame
;	   |<  T_HDR_INIT >|< T_HDR_GAP >|<   T_HDR_HIGH    >|<   T_HDR_LOW    >|
;	    _______________               ___________________                    _
;	___|               |_____________|                   |__________________| 
;
;*/
#define RF.T_HDR_INIT .4100
	endif
	ifndef RF.T_HDR_GAP
;/*
;	The time of the gap between the initial high time and the filter-sequence.
;*/
#define RF.T_HDR_GAP .550
	endif
	ifndef RF.T_HDR_HIGH
;/*
;	The high time of the filter-sequence.
;*/
#define RF.T_HDR_HIGH .2100
	endif
	ifndef RF.T_HDR_LOW
;/*
;	The low time of the filter-sequence.
;*/
#define RF.T_HDR_LOW .2100
	endif
	ifndef RF.T_STEP
;/*
;
;	This time adjusts the bitrate of the data transmission.
;
;
;	@timingdiagram A pwm coded '1'
;	 |<   T_STEP  >|<        2*T_STEP         >|
;	  _____________
;	_|             |___________________________|
;
;
;	@timingdiagram A pwm coded '0'
;	 |<        2*T_STEP         >|<   T_STEP  >|
;	  ___________________________
;	_|                           |_____________|
;
;*/
#define RF.T_STEP .250
	endif
	
	
	
	
	global RF.Send_Header, RF.Send_Data, RF.SendBuffer

	code

;/*
;	This function sends a complete data buffer to the air.
;	The Buffer has to be on Bank0 or Bank1
;
;	@param w The amount of bytes to be sent
;	@param FSR The start address of the buffer
;
;	@example
;	movlw	AFE.ConfData
;	movwf	FSR
;	movlw	0x07
;	call	RF.SendBuffer
;	@end-ex
;	@ex-desc This sends 7 bytes of the buffer "AFE.ConfMap" to the air 
;
;	@status Tested
;
;	@stacklevel 1 /*/RF.Send_Data
;
;*/
RF.SendBuffer
	banksel	RF.Byte_Counter
	movwf	RF.Byte_Counter
	call	RF.Send_Header
RF.SendBuffer.loop
	bankisel	PORTA
	movf	INDF,w
	call	RF.Send_Data
	incf	FSR,f
	banksel RF.Byte_Counter
	decfsz	RF.Byte_Counter,f
	goto	RF.SendBuffer.loop
	return
	
;----------------------------------------------------
;	Send UHF Data Byte
;	Data format: 
; ---------------------------------------------------
;/*
;
;	This function will transmit one byte of data over the RF antenna.
;	The value in w will be sent to the air over the RF antenna.
;
;	@param w The Byte of data to be sent
;
;	@example
;	movlw	0xf0
;	call	RF.Send_Data
;	@end-ex
;	@ex-desc This sends 0xf0 over the RF antenna
;
;	@status Tested
;
;	@stacklevel 1 /*/Delay.start /*/Delay.wait
;	@registers /*/Delay.start /*/Delay.wait
;	@calls Delay.start /*/Delay.start Delay.wait /*/Delay.wait
;
;*/
RF.Send_Data
	banksel RF.Data_REG
	movwf	RF.Data_REG		; Load Data to Send
	clrf	Parity
	; Send Byte using UHF transmitter

Transmit8	
	banksel RF.COUNTER
	movlw	.8
	movwf	RF.COUNTER	; initialize count register
TransmitNext
	banksel RF.Data_REG
	rrf		RF.Data_REG, f		; rotate receive register
	btfsc	STATUS, C		; test bit to be transmited
	goto	SendOne			; send high value

SendZero
	call 	Delay.Wait
	banksel RF.PORT
	bsf		RF.PORT,RF.PIN	; rf modulation on
	movlw	((2*RF.T_STEP)/.50)
	call 	Delay.start
	call 	Delay.Wait
	banksel RF.PORT
	bcf		RF.PORT,RF.PIN	; rf modulation off
	movlw	(RF.T_STEP/.50)
	call 	Delay.start
	goto	SendNextBit		; send next bit

SendOne
	call 	Delay.Wait
	banksel RF.PORT
	bsf		RF.PORT,RF.PIN	; rf modulation on
	movlw	(RF.T_STEP/.50)
	call 	Delay.start
	call 	Delay.Wait
	banksel RF.PORT
	bcf		RF.PORT,RF.PIN	; rf modulation off
	movlw	((2*RF.T_STEP)/.50)
	call 	Delay.start
	banksel	Parity
	incf	Parity,f
;	goto	SendNextBit		; send next bit

SendNextBit	
	banksel RF.COUNTER
	movf	RF.COUNTER,f
	btfsc	STATUS,Z
	goto	EndTX
	decfsz	RF.COUNTER, f	; decrement counter register
	goto	TransmitNext 	; transmit next bit
SendParity
;	btfsc	Parity,7
;	goto	EndTX
;	bsf		Parity,7
	btfss	Parity,0
	goto	SendOne
	banksel Parity
	btfsc	Parity,0
	goto	SendZero
EndTX
	call 	Delay.Wait
	retlw	0x00			; return to main routine


;----------------------------------------------------
;	Same as the LF data
;	Data format: (4ms + 500us + 2ms + 2ms) 
; ---------------------------------------------------
;/*
;
;	This function will transmit the header over the RF antenna.
;	The header is used to activate the receiver.
;	Data format: (4ms + 500us + 2ms + 2ms) 
;
;
;	@example
;	call	RF.Send_Header
;	@end-ex
;	@ex-desc This sends the header
;
;	@status Tested
;
;	@stacklevel 1 /*/Delay.start /*/Delay.wait
;	@registers /*/Delay.start /*/Delay.wait
;	@calls Delay.start /*/Delay.start Delay.wait /*/Delay.wait
;
;
;*/
RF.Send_Header
	banksel	RF.PORT
	bsf		RF.PORT,RF.PIN	; modulation data for rf
	movlw	(RF.T_HDR_INIT/.50)
	call	Delay.start
	call	Delay.Wait
	banksel	RF.PORT
	bcf		RF.PORT,RF.PIN	; turn off modulation data for rf
	movlw	(RF.T_HDR_GAP/.50)
	call	Delay.start
	call	Delay.Wait
	banksel	RF.PORT
	bsf		RF.PORT,RF.PIN	; modulation data for rf
	MOVLW	(RF.T_HDR_HIGH/.50)
	call	Delay.start
	call	Delay.Wait
	banksel	RF.PORT
	bcf		RF.PORT,RF.PIN	; turn off modulation data for rf
	movlw	(RF.T_HDR_LOW/.50)
	call	Delay.start
	return	

;****************************************************** 
;	END OF FILE : UHF_TX.ASM
;******************************************************	
	END