dlaqr0.f

famous linear algebra library (LAPACK) ports to windows

*        ==== NSMAX = the Largest number of simultaneous shifts
*        .    for which there is sufficient workspace. ====
*
         NSMAX = MIN( ( N+6 ) / 9, 2*LWORK / 3 )
         NSMAX = NSMAX - MOD( NSMAX, 2 )
*
*        ==== NDFL: an iteration count restarted at deflation. ====
*
         NDFL = 1
*
*        ==== ITMAX = iteration limit ====
*
         ITMAX = MAX( 30, 2*KEXSH )*MAX( 10, ( IHI-ILO+1 ) )
*
*        ==== Last row and column in the active block ====
*
         KBOT = IHI
*
*        ==== Main Loop ====
*
         DO 80 IT = 1, ITMAX
*
*           ==== Done when KBOT falls below ILO ====
*
            IF( KBOT.LT.ILO )
     $         GO TO 90
*
*           ==== Locate active block ====
*
            DO 10 K = KBOT, ILO + 1, -1
               IF( H( K, K-1 ).EQ.ZERO )
     $            GO TO 20
   10       CONTINUE
            K = ILO
   20       CONTINUE
            KTOP = K
*
*           ==== Select deflation window size ====
*
            NH = KBOT - KTOP + 1
            IF( NDFL.LT.KEXNW .OR. NH.LT.NW ) THEN
*
*              ==== Typical deflation window.  If possible and
*              .    advisable, nibble the entire active block.
*              .    If not, use size NWR or NWR+1 depending upon
*              .    which has the smaller corresponding subdiagonal
*              .    entry (a heuristic). ====
*
               NWINC = .TRUE.
               IF( NH.LE.MIN( NMIN, NWMAX ) ) THEN
                  NW = NH
               ELSE
                  NW = MIN( NWR, NH, NWMAX )
                  IF( NW.LT.NWMAX ) THEN
                     IF( NW.GE.NH-1 ) THEN
                        NW = NH
                     ELSE
                        KWTOP = KBOT - NW + 1
                        IF( ABS( H( KWTOP, KWTOP-1 ) ).GT.
     $                      ABS( H( KWTOP-1, KWTOP-2 ) ) )NW = NW + 1
                     END IF
                  END IF
               END IF
            ELSE
*
*              ==== Exceptional deflation window.  If there have
*              .    been no deflations in KEXNW or more iterations,
*              .    then vary the deflation window size.   At first,
*              .    because, larger windows are, in general, more
*              .    powerful than smaller ones, rapidly increase the
*              .    window up to the maximum reasonable and possible.
*              .    Then maybe try a slightly smaller window.  ====
*
               IF( NWINC .AND. NW.LT.MIN( NWMAX, NH ) ) THEN
                  NW = MIN( NWMAX, NH, 2*NW )
               ELSE
                  NWINC = .FALSE.
                  IF( NW.EQ.NH .AND. NH.GT.2 )
     $               NW = NH - 1
               END IF
            END IF
*
*           ==== Aggressive early deflation:
*           .    split workspace under the subdiagonal into
*           .      - an nw-by-nw work array V in the lower
*           .        left-hand-corner,
*           .      - an NW-by-at-least-NW-but-more-is-better
*           .        (NW-by-NHO) horizontal work array along
*           .        the bottom edge,
*           .      - an at-least-NW-but-more-is-better (NHV-by-NW)
*           .        vertical work array along the left-hand-edge.
*           .        ====
*
            KV = N - NW + 1
            KT = NW + 1
            NHO = ( N-NW-1 ) - KT + 1
            KWV = NW + 2
            NVE = ( N-NW ) - KWV + 1
*
*           ==== Aggressive early deflation ====
*
            CALL DLAQR3( WANTT, WANTZ, N, KTOP, KBOT, NW, H, LDH, ILOZ,
     $                   IHIZ, Z, LDZ, LS, LD, WR, WI, H( KV, 1 ), LDH,
     $                   NHO, H( KV, KT ), LDH, NVE, H( KWV, 1 ), LDH,
     $                   WORK, LWORK )
*
*           ==== Adjust KBOT accounting for new deflations. ====
*
            KBOT = KBOT - LD
*
*           ==== KS points to the shifts. ====
*
            KS = KBOT - LS + 1
*
*           ==== Skip an expensive QR sweep if there is a (partly
*           .    heuristic) reason to expect that many eigenvalues
*           .    will deflate without it.  Here, the QR sweep is
*           .    skipped if many eigenvalues have just been deflated
*           .    or if the remaining active block is small.
*
            IF( ( LD.EQ.0 ) .OR. ( ( 100*LD.LE.NW*NIBBLE ) .AND. ( KBOT-
     $          KTOP+1.GT.MIN( NMIN, NWMAX ) ) ) ) THEN
*
*              ==== NS = nominal number of simultaneous shifts.
*              .    This may be lowered (slightly) if DLAQR3
*              .    did not provide that many shifts. ====
*
               NS = MIN( NSMAX, NSR, MAX( 2, KBOT-KTOP ) )
               NS = NS - MOD( NS, 2 )
*
*              ==== If there have been no deflations
*              .    in a multiple of KEXSH iterations,
*              .    then try exceptional shifts.
*              .    Otherwise use shifts provided by
*              .    DLAQR3 above or from the eigenvalues
*              .    of a trailing principal submatrix. ====
*
               IF( MOD( NDFL, KEXSH ).EQ.0 ) THEN
                  KS = KBOT - NS + 1
                  DO 30 I = KBOT, MAX( KS+1, KTOP+2 ), -2
                     SS = ABS( H( I, I-1 ) ) + ABS( H( I-1, I-2 ) )
                     AA = WILK1*SS + H( I, I )
                     BB = SS
                     CC = WILK2*SS
                     DD = AA
                     CALL DLANV2( AA, BB, CC, DD, WR( I-1 ), WI( I-1 ),
     $                            WR( I ), WI( I ), CS, SN )
   30             CONTINUE
                  IF( KS.EQ.KTOP ) THEN
                     WR( KS+1 ) = H( KS+1, KS+1 )
                     WI( KS+1 ) = ZERO
                     WR( KS ) = WR( KS+1 )
                     WI( KS ) = WI( KS+1 )
                  END IF
               ELSE
*
*                 ==== Got NS/2 or fewer shifts? Use DLAQR4 or
*                 .    DLAHQR on a trailing principal submatrix to
*                 .    get more. (Since NS.LE.NSMAX.LE.(N+6)/9,
*                 .    there is enough space below the subdiagonal
*                 .    to fit an NS-by-NS scratch array.) ====
*
                  IF( KBOT-KS+1.LE.NS / 2 ) THEN
                     KS = KBOT - NS + 1
                     KT = N - NS + 1
                     CALL DLACPY( 'A', NS, NS, H( KS, KS ), LDH,
     $                            H( KT, 1 ), LDH )
                     IF( NS.GT.NMIN ) THEN
                        CALL DLAQR4( .false., .false., NS, 1, NS,
     $                               H( KT, 1 ), LDH, WR( KS ),
     $                               WI( KS ), 1, 1, ZDUM, 1, WORK,
     $                               LWORK, INF )
                     ELSE
                        CALL DLAHQR( .false., .false., NS, 1, NS,
     $                               H( KT, 1 ), LDH, WR( KS ),
     $                               WI( KS ), 1, 1, ZDUM, 1, INF )
                     END IF
                     KS = KS + INF
*
*                    ==== In case of a rare QR failure use
*                    .    eigenvalues of the trailing 2-by-2
*                    .    principal submatrix.  ====
*
                     IF( KS.GE.KBOT ) THEN
                        AA = H( KBOT-1, KBOT-1 )
                        CC = H( KBOT, KBOT-1 )
                        BB = H( KBOT-1, KBOT )
                        DD = H( KBOT, KBOT )
                        CALL DLANV2( AA, BB, CC, DD, WR( KBOT-1 ),
     $                               WI( KBOT-1 ), WR( KBOT ),
     $                               WI( KBOT ), CS, SN )
                        KS = KBOT - 1
                     END IF
                  END IF
*
                  IF( KBOT-KS+1.GT.NS ) THEN
*
*                    ==== Sort the shifts (Helps a little)
*                    .    Bubble sort keeps complex conjugate
*                    .    pairs together. ====
*
                     SORTED = .false.
                     DO 50 K = KBOT, KS + 1, -1
                        IF( SORTED )
     $                     GO TO 60
                        SORTED = .true.
                        DO 40 I = KS, K - 1
                           IF( ABS( WR( I ) )+ABS( WI( I ) ).LT.
     $                         ABS( WR( I+1 ) )+ABS( WI( I+1 ) ) ) THEN
                              SORTED = .false.
*
                              SWAP = WR( I )
                              WR( I ) = WR( I+1 )
                              WR( I+1 ) = SWAP
*
                              SWAP = WI( I )
                              WI( I ) = WI( I+1 )
                              WI( I+1 ) = SWAP
                           END IF
   40                   CONTINUE
   50                CONTINUE
   60                CONTINUE
                  END IF
*
*                 ==== Shuffle shifts into pairs of real shifts
*                 .    and pairs of complex conjugate shifts
*                 .    assuming complex conjugate shifts are
*                 .    already adjacent to one another. (Yes,
*                 .    they are.)  ====
*
                  DO 70 I = KBOT, KS + 2, -2
                     IF( WI( I ).NE.-WI( I-1 ) ) THEN
*
                        SWAP = WR( I )
                        WR( I ) = WR( I-1 )
                        WR( I-1 ) = WR( I-2 )
                        WR( I-2 ) = SWAP
*
                        SWAP = WI( I )
                        WI( I ) = WI( I-1 )
                        WI( I-1 ) = WI( I-2 )
                        WI( I-2 ) = SWAP
                     END IF
   70             CONTINUE
               END IF
*
*              ==== If there are only two shifts and both are
*              .    real, then use only one.  ====
*
               IF( KBOT-KS+1.EQ.2 ) THEN
                  IF( WI( KBOT ).EQ.ZERO ) THEN
                     IF( ABS( WR( KBOT )-H( KBOT, KBOT ) ).LT.
     $                   ABS( WR( KBOT-1 )-H( KBOT, KBOT ) ) ) THEN
                        WR( KBOT-1 ) = WR( KBOT )
                     ELSE
                        WR( KBOT ) = WR( KBOT-1 )
                     END IF
                  END IF
               END IF
*
*              ==== Use up to NS of the the smallest magnatiude
*              .    shifts.  If there aren't NS shifts available,
*              .    then use them all, possibly dropping one to
*              .    make the number of shifts even. ====
*
               NS = MIN( NS, KBOT-KS+1 )
               NS = NS - MOD( NS, 2 )
               KS = KBOT - NS + 1
*
*              ==== Small-bulge multi-shift QR sweep:
*              .    split workspace under the subdiagonal into
*              .    - a KDU-by-KDU work array U in the lower
*              .      left-hand-corner,
*              .    - a KDU-by-at-least-KDU-but-more-is-better
*              .      (KDU-by-NHo) horizontal work array WH along
*              .      the bottom edge,
*              .    - and an at-least-KDU-but-more-is-better-by-KDU
*              .      (NVE-by-KDU) vertical work WV arrow along
*              .      the left-hand-edge. ====
*
               KDU = 3*NS - 3
               KU = N - KDU + 1
               KWH = KDU + 1
               NHO = ( N-KDU+1-4 ) - ( KDU+1 ) + 1
               KWV = KDU + 4
               NVE = N - KDU - KWV + 1
*
*              ==== Small-bulge multi-shift QR sweep ====
*
               CALL DLAQR5( WANTT, WANTZ, KACC22, N, KTOP, KBOT, NS,
     $                      WR( KS ), WI( KS ), H, LDH, ILOZ, IHIZ, Z,
     $                      LDZ, WORK, 3, H( KU, 1 ), LDH, NVE,
     $                      H( KWV, 1 ), LDH, NHO, H( KU, KWH ), LDH )
            END IF
*
*           ==== Note progress (or the lack of it). ====
*
            IF( LD.GT.0 ) THEN
               NDFL = 1
            ELSE
               NDFL = NDFL + 1
            END IF
*
*           ==== End of main loop ====
   80    CONTINUE
*
*        ==== Iteration limit exceeded.  Set INFO to show where
*        .    the problem occurred and exit. ====
*
         INFO = KBOT
   90    CONTINUE
      END IF
*
*     ==== Return the optimal value of LWORK. ====
*
      WORK( 1 ) = DBLE( LWKOPT )
*
*     ==== End of DLAQR0 ====
*
      END