image_cfg.h

Windows CE 6.0 针对PXA270的开发板的BSP参考代码

//
// Copyright (c) Microsoft Corporation.  All rights reserved.
//
//
// Use of this sample source code is subject to the terms of the Microsoft
// license agreement under which you licensed this sample source code. If
// you did not accept the terms of the license agreement, you are not
// authorized to use this sample source code. For the terms of the license,
// please see the license agreement between you and Microsoft or, if applicable,
// see the LICENSE.RTF on your install media or the root of your tools installation.
// THE SAMPLE SOURCE CODE IS PROVIDED "AS IS", WITH NO WARRANTIES.
//
//------------------------------------------------------------------------------
//
//  File:  image_cfg.h
//
//  Defines configuration parameters used to create the NK and Bootloader
//  program images.
//
#ifndef __IMAGE_CFG_H
#define __IMAGE_CFG_H

#if __cplusplus
extern "C" {
#endif

//------------------------------------------------------------------------------
//  RESTRICTION
//
//  This file is a configuration file. It should ONLY contain simple #define 
//  directives defining constants. This file is included by other files that 
//  only support simple substitutions.
//
//------------------------------------------------------------------------------

//------------------------------------------------------------------------------
//  NAMING CONVENTION
//
//  The IMAGE_ naming convention ...
//
//  IMAGE_<NAME>_<SECTION>_<MEMORY_DEVICE>_[OFFSET|SIZE|START|END]
//
//      <NAME>          - WINCE, BOOT, SHARE
//      <SECTION>       - section name: user defined
//      <MEMORY_DEVICE> - the memory device the block resides on
//      OFFSET          - number of bytes from memory device start address
//      SIZE            - maximum size of the block
//      START           - start address of block    (device address + offset)
//      END             - end address of block      (start address  + size - 1)
//
//------------------------------------------------------------------------------

#define IMAGE_SHARE_ARGS_PA_START           0xA00FF000
#define IMAGE_SHARE_ARGS_UA_START           0xA00FF000
#define IMAGE_SHARE_ARGS_CA_START           0x800FF000
#define IMAGE_SHARE_ARGS_SIZE               0x00001000

#define IMAGE_BOOT_BLDRIMAGE_FLASH_OFFSET   0x00000000
#define IMAGE_BOOT_BLDRIMAGE_RAM_OFFSET     0x00030000
#define IMAGE_BOOT_BLDRIMAGE_RAM_SIZE       0x00040000

#define IMAGE_BOOT_BLDRIMAGE_FLASH_PA_START (MAINSTONEII_BASE_PA_BOOT_FLASH + IMAGE_BOOT_BLDRIMAGE_FLASH_OFFSET)
#define IMAGE_BOOT_BLDRIMAGE_FLASH_PA_END   (IMAGE_BOOT_BLDRIMAGE_FLASH_PA_START + IMAGE_BOOT_BLDRIMAGE_RAM_SIZE - 1)
#define IMAGE_BOOT_BLDRIMAGE_RAM_PA_START   (MAINSTONEII_BASE_PA_SDRAM + IMAGE_BOOT_BLDRIMAGE_RAM_OFFSET)
#define IMAGE_BOOT_BLDRIMAGE_RAM_PA_END     (IMAGE_BOOT_BLDRIMAGE_RAM_PA_START + IMAGE_BOOT_BLDRIMAGE_RAM_SIZE - 1)

#define IMAGE_BOOT_STACK_RAM_UA_START       0xA0010000

#define IMAGE_BOOT_CONFIG_FLASH_OFFSET      0x00040000

#define IMAGE_BOOT_IPL_FLASH_OFFSET         0x00080000
#define IMAGE_BOOT_IPL_FLASH_MAXSIZE        0x00040000
#define IMAGE_BOOT_IPL_FLASH_PA_START       (MAINSTONEII_BASE_PA_BOOT_FLASH + IMAGE_BOOT_IPL_FLASH_OFFSET)
#define IMAGE_BOOT_IPL_FLASH_PA_END         (IMAGE_BOOT_IPL_FLASH_PA_START + IMAGE_BOOT_IPL_FLASH_MAXSIZE - 1)

#define IMAGE_OSIMAGE_FLASH_OFFSET          0x000C0000
#define IMAGE_OSIMAGE_FLASH_MAXSIZE         (MAINSTONEII_SIZE_BOOT_FLASH - IMAGE_OSIMAGE_FLASH_OFFSET)

//#define IMAGE_BOOT_DOWNLOADCACHE_RAM_OFFSET 0x00060000
//#define IMAGE_BOOT_DOWNLOADCACHE_RAM_SIZE   0x00080000

//------------------------------------------------------------------------------

#if __cplusplus
}
#endif

#endif