📄 alloc.c
字号:
/* This file is concerned with allocating and freeing arbitrary-size blocks of * physical memory on behalf of the FORK and EXEC system calls. The key data * structure used is the hole table, which maintains a list of holes in memory. * It is kept sorted in order of increasing memory address. The addresses * it contains refers to physical memory, starting at absolute address 0 * (i.e., they are not relative to the start of PM). During system * initialization, that part of memory containing the interrupt vectors, * kernel, and PM are "allocated" to mark them as not available and to * remove them from the hole list. * * The entry points into this file are: * alloc_mem: allocate a given sized chunk of memory * free_mem: release a previously allocated chunk of memory * mem_init: initialize the tables when PM start up * max_hole: returns the largest hole currently available * mem_holes_copy: for outsiders who want a copy of the hole-list */#include "pm.h"#include <minix/com.h>#include <minix/callnr.h>#include <minix/type.h>#include <minix/config.h>#include <signal.h>#include <stdlib.h>#include <string.h>#include "mproc.h"#include "../../kernel/const.h"#include "../../kernel/config.h"#include "../../kernel/type.h"#define NIL_HOLE (struct hole *) 0PRIVATE struct hole hole[_NR_HOLES];PRIVATE u32_t high_watermark = 0;PRIVATE struct hole *hole_head; /* pointer to first hole */PRIVATE struct hole *free_slots;/* ptr to list of unused table slots */#if ENABLE_SWAPPRIVATE int swap_fd = -1; /* file descriptor of open swap file/device */PRIVATE u32_t swap_offset; /* offset to start of swap area on swap file */PRIVATE phys_clicks swap_base; /* memory offset chosen as swap base */PRIVATE phys_clicks swap_maxsize;/* maximum amount of swap "memory" possible */PRIVATE struct mproc *in_queue; /* queue of processes wanting to swap in */PRIVATE struct mproc *outswap = &mproc[0]; /* outswap candidate? */#else /* ! ENABLE_SWAP */#define swap_base ((phys_clicks) -1)#endif /* ENABLE_SWAP */FORWARD _PROTOTYPE( void del_slot, (struct hole *prev_ptr, struct hole *hp) );FORWARD _PROTOTYPE( void merge, (struct hole *hp) );#if ENABLE_SWAPFORWARD _PROTOTYPE( int swap_out, (void) );#else#define swap_out() (0)#endif/*===========================================================================* * alloc_mem * *===========================================================================*/PUBLIC phys_clicks alloc_mem(clicks)phys_clicks clicks; /* amount of memory requested */{/* Allocate a block of memory from the free list using first fit. The block * consists of a sequence of contiguous bytes, whose length in clicks is * given by 'clicks'. A pointer to the block is returned. The block is * always on a click boundary. This procedure is called when memory is * needed for FORK or EXEC. Swap other processes out if needed. */ register struct hole *hp, *prev_ptr; phys_clicks old_base; do { prev_ptr = NIL_HOLE; hp = hole_head; while (hp != NIL_HOLE && hp->h_base < swap_base) { if (hp->h_len >= clicks) { /* We found a hole that is big enough. Use it. */ old_base = hp->h_base; /* remember where it started */ hp->h_base += clicks; /* bite a piece off */ hp->h_len -= clicks; /* ditto */ /* Remember new high watermark of used memory. */ if(hp->h_base > high_watermark) high_watermark = hp->h_base; /* Delete the hole if used up completely. */ if (hp->h_len == 0) del_slot(prev_ptr, hp); /* Return the start address of the acquired block. */ return(old_base); } prev_ptr = hp; hp = hp->h_next; } } while (swap_out()); /* try to swap some other process out */ return(NO_MEM);}/*===========================================================================* * free_mem * *===========================================================================*/PUBLIC void free_mem(base, clicks)phys_clicks base; /* base address of block to free */phys_clicks clicks; /* number of clicks to free */{/* Return a block of free memory to the hole list. The parameters tell where * the block starts in physical memory and how big it is. The block is added * to the hole list. If it is contiguous with an existing hole on either end, * it is merged with the hole or holes. */ register struct hole *hp, *new_ptr, *prev_ptr; if (clicks == 0) return; if ( (new_ptr = free_slots) == NIL_HOLE) panic(__FILE__,"hole table full", NO_NUM); new_ptr->h_base = base; new_ptr->h_len = clicks; free_slots = new_ptr->h_next; hp = hole_head; /* If this block's address is numerically less than the lowest hole currently * available, or if no holes are currently available, put this hole on the * front of the hole list. */ if (hp == NIL_HOLE || base <= hp->h_base) { /* Block to be freed goes on front of the hole list. */ new_ptr->h_next = hp; hole_head = new_ptr; merge(new_ptr); return; } /* Block to be returned does not go on front of hole list. */ prev_ptr = NIL_HOLE; while (hp != NIL_HOLE && base > hp->h_base) { prev_ptr = hp; hp = hp->h_next; } /* We found where it goes. Insert block after 'prev_ptr'. */ new_ptr->h_next = prev_ptr->h_next; prev_ptr->h_next = new_ptr; merge(prev_ptr); /* sequence is 'prev_ptr', 'new_ptr', 'hp' */}/*===========================================================================* * del_slot * *===========================================================================*/PRIVATE void del_slot(prev_ptr, hp)/* pointer to hole entry just ahead of 'hp' */register struct hole *prev_ptr;/* pointer to hole entry to be removed */register struct hole *hp; {/* Remove an entry from the hole list. This procedure is called when a * request to allocate memory removes a hole in its entirety, thus reducing * the numbers of holes in memory, and requiring the elimination of one * entry in the hole list. */ if (hp == hole_head) hole_head = hp->h_next; else prev_ptr->h_next = hp->h_next; hp->h_next = free_slots; hp->h_base = hp->h_len = 0; free_slots = hp;}/*===========================================================================* * merge * *===========================================================================*/PRIVATE void merge(hp)register struct hole *hp; /* ptr to hole to merge with its successors */{/* Check for contiguous holes and merge any found. Contiguous holes can occur * when a block of memory is freed, and it happens to abut another hole on * either or both ends. The pointer 'hp' points to the first of a series of * three holes that can potentially all be merged together. */ register struct hole *next_ptr; /* If 'hp' points to the last hole, no merging is possible. If it does not, * try to absorb its successor into it and free the successor's table entry. */ if ( (next_ptr = hp->h_next) == NIL_HOLE) return; if (hp->h_base + hp->h_len == next_ptr->h_base) { hp->h_len += next_ptr->h_len; /* first one gets second one's mem */ del_slot(hp, next_ptr); } else { hp = next_ptr; } /* If 'hp' now points to the last hole, return; otherwise, try to absorb its * successor into it. */ if ( (next_ptr = hp->h_next) == NIL_HOLE) return; if (hp->h_base + hp->h_len == next_ptr->h_base) { hp->h_len += next_ptr->h_len; del_slot(hp, next_ptr); }}/*===========================================================================* * mem_init * *===========================================================================*/PUBLIC void mem_init(chunks, free)struct memory *chunks; /* list of free memory chunks */phys_clicks *free; /* memory size summaries */{/* Initialize hole lists. There are two lists: 'hole_head' points to a linked * list of all the holes (unused memory) in the system; 'free_slots' points to * a linked list of table entries that are not in use. Initially, the former * list has one entry for each chunk of physical memory, and the second * list links together the remaining table slots. As memory becomes more * fragmented in the course of time (i.e., the initial big holes break up into * smaller holes), new table slots are needed to represent them. These slots * are taken from the list headed by 'free_slots'. */ int i; register struct hole *hp;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -