common-smdk.c

cs8900网卡驱动。运行环境为ARM9+LINUX

/* linux/arch/arm/plat-s3c24xx/common-smdk.c
 *
 * Copyright (c) 2006 Simtec Electronics
 *	Ben Dooks <[e-mail]>
 *
 * Common code for SMDK2410 and SMDK2440 boards
 *
 * http://www.fluff.org/ben/smdk2440/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
*/

#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/sysdev.h>
#include <linux/platform_device.h>

#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>

#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>

#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>

#include <asm/arch/regs-gpio.h>
#include <asm/arch/leds-gpio.h>
#include <asm/arch/irqs.h>

#include <asm/plat-s3c/nand.h>

#include <asm/plat-s3c24xx/common-smdk.h>
#include <asm/plat-s3c24xx/devs.h>
#include <asm/plat-s3c24xx/pm.h>

/* LED devices */

static struct s3c24xx_led_platdata smdk_pdata_led4 = {
	.gpio		= S3C2410_GPF4,
	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
	.name		= "led4",
	.def_trigger	= "timer",
};

static struct s3c24xx_led_platdata smdk_pdata_led5 = {
	.gpio		= S3C2410_GPF5,
	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
	.name		= "led5",
	.def_trigger	= "nand-disk",
};

static struct s3c24xx_led_platdata smdk_pdata_led6 = {
	.gpio		= S3C2410_GPF6,
	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
	.name		= "led6",
};

static struct s3c24xx_led_platdata smdk_pdata_led7 = {
	.gpio		= S3C2410_GPF7,
	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
	.name		= "led7",
};

static struct platform_device smdk_led4 = {
	.name		= "s3c24xx_led",
	.id		= 0,
	.dev		= {
		.platform_data = &smdk_pdata_led4,
	},
};

static struct platform_device smdk_led5 = {
	.name		= "s3c24xx_led",
	.id		= 1,
	.dev		= {
		.platform_data = &smdk_pdata_led5,
	},
};

static struct platform_device smdk_led6 = {
	.name		= "s3c24xx_led",
	.id		= 2,
	.dev		= {
		.platform_data = &smdk_pdata_led6,
	},
};

static struct platform_device smdk_led7 = {
	.name		= "s3c24xx_led",
	.id		= 3,
	.dev		= {
		.platform_data = &smdk_pdata_led7,
	},
};

/* NAND parititon from 2.4.18-swl5 */

static struct mtd_partition smdk_default_nand_part[] = {
	[0] = {
		.name	= "Boot Agent",
		.size	= SZ_16K,
		.offset	= 0,
	},
	[1] = {
		.name	= "S3C2410 flash partition 1",
		.offset = 0,
		.size	= SZ_2M,
	},
	[2] = {
		.name	= "S3C2410 flash partition 2",
		.offset = SZ_4M,
		.size	= SZ_4M,
	},
	[3] = {
		.name	= "S3C2410 flash partition 3",
		.offset	= SZ_8M,
		.size	= SZ_2M,
	},
	[4] = {
		.name	= "S3C2410 flash partition 4",
		.offset = SZ_1M * 10,
		.size	= SZ_4M,
	},
	[5] = {
		.name	= "S3C2410 flash partition 5",
		.offset	= SZ_1M * 14,
		.size	= SZ_1M * 10,
	},
	[6] = {
		.name	= "S3C2410 flash partition 6",
		.offset	= SZ_1M * 24,
		.size	= SZ_1M * 24,
	},
	[7] = {
		.name	= "S3C2410 flash partition 7",
		.offset = SZ_1M * 48,
		.size	= SZ_16M,
	}
};

static struct s3c2410_nand_set smdk_nand_sets[] = {
	[0] = {
		.name		= "NAND",
		.nr_chips	= 1,
		.nr_partitions	= ARRAY_SIZE(smdk_default_nand_part),
		.partitions	= smdk_default_nand_part,
	},
};

/* choose a set of timings which should suit most 512Mbit
 * chips and beyond.
*/

static struct s3c2410_platform_nand smdk_nand_info = {
	.tacls		= 20,
	.twrph0		= 60,
	.twrph1		= 20,
	.nr_sets	= ARRAY_SIZE(smdk_nand_sets),
	.sets		= smdk_nand_sets,
};


/* platform device for cs8900 */
static void cs8900pdev_release(struct device *dev)
{
	struct platform_device *pdev = to_platform_device(dev);
	printk("Release %s, id is %d\n", pdev->name, pdev->id);
}

static struct resource cs8900_res[] = {
	[0] = {
		.start = 0x19000000,
		.end = 0x1900000f,
		.flags = IORESOURCE_IO,
	},
	[1] = {
		.start = IRQ_EINT9,
		.end = IRQ_EINT9,
		.flags = IORESOURCE_IRQ,
	},
};

static struct platform_device my8900 = {
	.name = "CS8900-2624",
	.id = 1,
	.num_resources = ARRAY_SIZE(cs8900_res),
	.resource = cs8900_res,
	.dev = {
		.release = cs8900pdev_release,
	},
};


/* devices we initialise */

static struct platform_device __initdata *smdk_devs[] = {
	&my8900,
	&s3c_device_nand,
	&smdk_led4,
	&smdk_led5,
	&smdk_led6,
	&smdk_led7,
};

void __init smdk_machine_init(void)
{
	/* Configure the LEDs (even if we have no LED support)*/

	s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPF4_OUTP);
	s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPF5_OUTP);
	s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPF6_OUTP);
	s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPF7_OUTP);

	s3c2410_gpio_setpin(S3C2410_GPF4, 1);
	s3c2410_gpio_setpin(S3C2410_GPF5, 1);
	s3c2410_gpio_setpin(S3C2410_GPF6, 1);
	s3c2410_gpio_setpin(S3C2410_GPF7, 1);

	if (machine_is_smdk2443())
		smdk_nand_info.twrph0 = 50;

	s3c_device_nand.dev.platform_data = &smdk_nand_info;

	platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));

	s3c2410_pm_init();
}