dac0832c语言程序模块.txt

DAC0832数模转换程序直接可以使用！

DAC0832 C语言程序模块
#include"da_conversion.h"
const char sin_data[256]={0x80,0x83,0x86,0x89,0x8c,0x8f,0x92,0x95,0x98,0x9c,0x9f,0xa2,0xa5,0xa8,
0xab,0xae,0xb0,0xb3,0xb6,0xb9,0xbc,0xbf,0xc1,0xc4,0xc7,0xc9,0xcc,0xce,0xd1,0xd3,0xd5,
0xd8,0xda,0xdc,0xde,0xe0,0xe2,0xe4,0xe6,0xe8,0xea,0xec,0xed,0xef,0xf0,0xf2,0xf3,0xf4,
0xf6,0xf7,0xf8,0xf9,0xfa,0xfb,0xfc,0xfc,0xfd,0xfe,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,
0xff,0xff,0xff,0xff,0xff,0xfe,0xfe,0xfd,0xfc,0xfc,0xfb,0xfa,0xf9,0xf8,0xf7,0xf6,0xf5,
0xf3,0xf2,0xf0,0xef,0xed,0xec,0xea,0xe8,0xe6,0xe4,0xe3,0xe1,0xde,0xdc,0xda,0xd8,0xd6,
0xd3,0xd1,0xce,0xcc,0xc9,0xc7,0xc4,0xc1,0xbf,0xbc,0xb9,0xb6,0xb4,0xb1,0xae,0xab,0xa8,
0xa5,0xa2,0x9f,0x9c,0x99,0x96,0x92,0x8f,0x8c,0x89,0x86,0x83,0x80,0x7d,0x79,0x76,0x73,
0x70,0x6d,0x6a,0x67,0x64,0x61,0x5e,0x5b,0x58,0x55,0x52,0x4f,0x4c,0x49,0x46,0x43,0x41,
0x3e,0x3b,0x39,0x36,0x33,0x31,0x2e,0x2c,0x2a,0x27,0x25,0x23,0x21,0x1f,0x1d,0x1b,0x19,
0x17,0x15,0x14,0x12,0x10,0xf,0xd,0xc,0xb,0x9,0x8,0x7,0x6,0x5,0x4,0x3,0x3,0x2,0x1,0x1,
0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x1,0x1,0x2,0x3,0x3,0x4,0x5,0x6,0x7,0x8,
0x9,0xa,0xc,0xd,0xe,0x10,0x12,0x13,0x15,0x17,0x18,0x1a,0x1c,0x1e,0x20,0x23,0x25,0x27,
0x29,0x2c,0x2e,0x30,0x33,0x35,0x38,0x3b,0x3d,0x40,0x43,0x46,0x48,0x4b,0x4e,0x51,0x54,
0x57,0x5a,0x5d,0x60,0x63,0x66,0x69,0x6c,0x6f,0x73,0x76,0x79,0x7c};//正弦码表，可通过SIN（）函数获得
/**********************************************
          DAC初始化
**********************************************/
void DAC_init(void)
{
DDRB=0XFF;
}
/**********************************************
           输出数据到端口（注意考虑延时）
**********************************************/
void conversion(unsigned char out_data)
           {
           PORTB=out_data; //输出数据
           delay_nus(10);         //延时等待转换
           }
/************************************************
          产生正弦波函数
************************************************/
void sine(void)
{
unsigned char i;
for(i=0;i<255;i++)
{
conversion(sin_data[i]);
}
}
/***********************************************
       产生锯齿波（下降型）
***********************************************/
void saw(void)
{
unsigned char j;
for(j=0;j<255;j++)
conversion(j);
}
/***********************************************
           产生方波(脉冲)
***********************************************/
void pulse(void)
{
conversion(0xff);
delay_nus(1000);
conversion(0x00);
delay_nus(1000);
}
/***********************************************
          产生三角波
***********************************************/
void triangle(void)
{
unsigned char k;
for(k=0;k<255;k++)
conversion(k);
for(;k>0;k--)
conversion(k);
}

需要硬件连接及仿真图的联系QQ：249900762