d12config.h

来自「PDIUSBD12的固件程序可能对开发USB1.1的兄弟有用」· C头文件 代码 · 共 35 行

//硬件配置头文件

typedef unsigned char  INT8U;          
typedef signed   char  INT8; 
typedef unsigned short INT16U; 
typedef signed   short INT16; 
typedef unsigned long  INT32U; 
typedef signed   long  INT32; 
typedef float  FP32; 
typedef double FP64; 

#define DISABLE() EA = 0 //关总中断 
#define ENABLE() EA = 1 //开总中断

//PDIUSBD12命令与数据地址
#define D12_DATA 0xff02	//D12 数据地址
#define D12_COMMAND 0xff03 //D12 命令地址


sbit MCU_SWM0=P1^0;//测试按钮1
sbit MCU_SWM1=P1^1;//测试按钮2
sbit MCU_LED0=P1^2;//测试LED1
sbit MCU_LED1=P1^3;//测试LED2
sbit MCU_D12CS=P1^6; //D12片选引脚
sbit MCU_D12RST=P1^7; //D12复位引脚
sbit MCU_D12INT=P3^2; //D12中断
sbit MCU_D12SUSPD=P3^3;	//D12挂起
sbit MCU_D12WR=P3^6;//D12读选通
sbit MCU_D12RD=P3^7;//D12写选通

#define D12_SendResume_EN 0
#define D12_ReadCurrentFrameNumber_EN 0
#define D12_ClearBuff_EN  0
#define D12_ReadEndpointStatus_EN 0