propman.c

Open DMT Client C Source code

// ----------------------------------------------------------------------------
// Copyright 2006-2007, Martin D. Flynn
// All rights reserved
// ----------------------------------------------------------------------------
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// 
// http://www.apache.org/licenses/LICENSE-2.0
// 
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//
// ----------------------------------------------------------------------------
// Description:
//  Property manager
//  Handles typed properties needed by the protocol.
//  Note: this module has not yet been made thread-safe.
// ---
// Change History:
//  2006/01/04  Martin D. Flynn
//     -Initial release
//  2006/01/17  Martin D. Flynn
//     -Changed property keyname strings
//     -Added PROP_GEOF_ARRIVE_DELAY/PROP_GEOF_DEPART_DELAY properties
//  2006/01/29  Martin D. Flynn
//     -Force KVA_NONDEFAULT attributes on properties loaded from a file
//     -Changed property save to default saving with key-name (rather than key-id)
//     -Added "propClearChanged()" function for clearing property 'changed' state.
//  2006/02/16  Martin D. Flynn
//     -Removed 'SAVE' attribute from config properties that should remain static.
//  2006/04/06  Martin D. Flynn
//     -Changed communication property defaults
//  2006/05/07  Martin D. Flynn
//     -Added PROP_CMD_GEOF_ADMIN property.
//     -Added PROP_GEOF_COUNT property.
//     -Added PROP_GEOF_VERSION property.
//  2006/07/13  Martin D. Flynn
//     -Updated DFT_PROTOCOL_VERSION to reflect protocol document version change.
//  2007/01/28  Martin D. Flynn
//     -WindowsCE port
//     -Added several new properties (see 'props.h')
//     -Added 'propSetSave' function to override property 'save' attribute
//     -Replaced DFT_PROTOCOL_VERSION with PROTOCOL_VERSION (set in 'defaults.h')
//     -Changed the following properties to store odometer values in 1 meter units:
//      PROP_GPS_ACCURACY, PROP_GPS_DISTANCE_DELTA, 
//      PROP_ODOMETER_#_VALUE, PROP_ODOMETER_#_LIMIT
//     -Changed the following properties to store elapsed time values in seconds:
//      PROP_ELAPSED_#_VALUE, PROP_ELAPSED_#_LIMIT
//     -Property key lookups now use a binary search.
//  2007/04/28  Martin D. Flynn
//     -Change default PROP_COMM_HOST to an empty string ("").  While using "localhost"
//      as the default for debugging purposes, it doesn't make sense in an embedded
//      client.  This value should be explicitly defined/set in the 'props.conf' file.
// ----------------------------------------------------------------------------

#include "stdafx.h" // TARGET_WINCE
#include "custom/defaults.h"

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <stdarg.h>
#include <ctype.h>
#include <math.h>

#include "custom/log.h"

#include "tools/strtools.h"
#include "tools/gpstools.h"
#include "tools/utctools.h"
#include "tools/bintools.h"
#include "tools/io.h"

#include "base/propman.h"

#include "base/packet.h"
// ----------------------------------------------------------------------------

#if defined(TARGET_WINCE)
// poor-mans 'rint' (WinCE doesn't seem to have it's own 'rint' function)
#define RINT(X)         (UInt32)((X) + 0.5)
#else
#define RINT(X)         rint(X)
#endif

// ----------------------------------------------------------------------------

#define PROP_LOCK       // implement property manager locking
#define PROP_UNLOCK     // implement property manager unlocking

// ----------------------------------------------------------------------------
// These are the default settings for specific property values that may need
// to be customized for a particular client application.  During client app
// initialization the appropriate calls to the following function should be made.
//    "propInitFromString(<PopKey>, <StringValue>);"
// should be called.

//#define DFT_FIRMWARE_VERSION    "DMTP_C_" RELEASE_VERSION // default firmware version
#define DFT_FIRMWARE_VERSION    APPLICATION_NAME "_C." RELEASE_VERSION

#define DFT_COMM_HOST           "" // (was "localhost")
#define DFT_COMM_PORT           "31000" // this default may change at any time

#define DFT_ACCESS_PIN          "0x3132333435363738"    // "12345678"

// 'true' to save with key name, 'false' to save with key code
#define PROP_SAVE_KEY_NAME      utTrue

// ----------------------------------------------------------------------------

#define WO                      (KVA_HIDDEN | KVA_WRITEONLY)
#define RO                      (KVA_READONLY)
#define SAVE                    (KVA_SAVE)

#define UInt32_to_Double(U,T)   ((double)(U) / pow(10.0,(double)KVT_DEC(T)))
#define Double_to_UInt32(D,T)   ((UInt32)RINT((D) * pow(10.0,(double)KVT_DEC(T))))

// ----------------------------------------------------------------------------
// Property definition table
// Notes:
//  - The values in the 'name' column are arbitrary, and are just suggestions in the
//    OpenDMTP protocol.  As such, they may change at any time without notice.  If you
//    rely on the specified property 'name' in your property files, make sure you double 
//    check your property files against the names specified here at the time you plan to 
//    upgrade your code to the newest version.

static utBool     binarySearchOK = utFalse; // false, until verified

static KeyValue_t properties[] = {

#ifdef CUSTOM_PROPERTIES
#include "custom/custprop.inc"
#endif

    //KeyCode                      Name               Type                   Attr       Ndx  Init
    // --- local serial port configuration
    { PROP_CFG_XPORT_PORT        , "cfg.xpo.port"   , KVT_STRING            , RO       ,  1,  "" },
    { PROP_CFG_XPORT_BPS         , "cfg.xpo.bps"    , KVT_UINT32            , RO       ,  1,  "" },
    { PROP_CFG_XPORT_DEBUG       , "cfg.xpo.debug"  , KVT_BOOLEAN           , RO       ,  1,  "0" },
    { PROP_CFG_GPS_PORT          , "cfg.gps.port"   , KVT_STRING            , RO       ,  1,  "" },
    { PROP_CFG_GPS_BPS           , "cfg.gps.bps"    , KVT_UINT32            , RO       ,  1,  "4800" },
    { PROP_CFG_GPS_MODEL         , "cfg.gps.model"  , KVT_STRING            , RO       ,  1,  "" },
    { PROP_CFG_GPS_DEBUG         , "cfg.gps.debug"  , KVT_BOOLEAN           , RO       ,  1,  "0" },
    { PROP_CFG_SERIAL0_PORT      , "cfg.sp0.port"   , KVT_STRING            , RO       ,  1,  "" },
    { PROP_CFG_SERIAL0_BPS       , "cfg.sp0.bps"    , KVT_UINT32            , RO       ,  1,  "" },
    { PROP_CFG_SERIAL0_DEBUG     , "cfg.sp0.debug"  , KVT_BOOLEAN           , RO       ,  1,  "0" },
    { PROP_CFG_SERIAL1_PORT      , "cfg.sp1.port"   , KVT_STRING            , RO       ,  1,  "" },
    { PROP_CFG_SERIAL1_BPS       , "cfg.sp1.bps"    , KVT_UINT32            , RO       ,  1,  "" },
    { PROP_CFG_SERIAL1_DEBUG     , "cfg.sp1.debug"  , KVT_BOOLEAN           , RO       ,  1,  "0" },
    { PROP_CFG_SERIAL2_PORT      , "cfg.sp2.port"   , KVT_STRING            , RO       ,  1,  "" },
    { PROP_CFG_SERIAL2_BPS       , "cfg.sp2.bps"    , KVT_UINT32            , RO       ,  1,  "" },
    { PROP_CFG_SERIAL2_DEBUG     , "cfg.sp2.debug"  , KVT_BOOLEAN           , RO       ,  1,  "0" },
    { PROP_CFG_SERIAL3_PORT      , "cfg.sp3.port"   , KVT_STRING            , RO       ,  1,  "" },
    { PROP_CFG_SERIAL3_BPS       , "cfg.sp3.bps"    , KVT_UINT32            , RO       ,  1,  "" },
    { PROP_CFG_SERIAL3_DEBUG     , "cfg.sp3.debug"  , KVT_BOOLEAN           , RO       ,  1,  "0" },

    // --- miscellaneous commands
    { PROP_CMD_SAVE_PROPS        , "cmd.saveprops"  , KVT_COMMAND           , WO       ,  1,  0 },
    { PROP_CMD_AUTHORIZE         , "cmd.auth"       , KVT_COMMAND           , WO       ,  1,  0 },
    { PROP_CMD_STATUS_EVENT      , "cmd.status"     , KVT_COMMAND           , WO       ,  1,  0 },
    { PROP_CMD_SET_OUTPUT        , "cmd.output"     , KVT_COMMAND           , WO       ,  1,  0 },
    { PROP_CMD_RESET             , "cmd.reset"      , KVT_COMMAND           , WO       ,  1,  0 },

    // --- retained state properties
    { PROP_STATE_PROTOCOL        , "sta.proto"      , KVT_UINT8             , RO       ,  3,  PROTOCOL_VERSION },
    { PROP_STATE_FIRMWARE        , "sta.firm"       , KVT_STRING            , RO       ,  1,  DFT_FIRMWARE_VERSION },
    { PROP_STATE_COPYRIGHT       , "sta.copyright"  , KVT_STRING            , RO       ,  1,  "" },
    { PROP_STATE_SERIAL          , "sta.serial"     , KVT_STRING            , RO       ,  1,  "" },
    { PROP_STATE_UNIQUE_ID       , "sta.uniq"       , KVT_BINARY            , RO       , 30,  "" },
    { PROP_STATE_ACCOUNT_ID      , "sta.account"    , KVT_STRING            , RO       ,  1,  "" },
    { PROP_STATE_DEVICE_ID       , "sta.device"     , KVT_STRING            , RO       ,  1,  "" },
#if defined(SECONDARY_SERIAL_TRANSPORT)
    { PROP_STATE_DEVICE_BT       , "sta.device.bt"  , KVT_STRING            ,    SAVE  ,  1,  "" },
#endif
    { PROP_STATE_USER_ID         , "sta.user"       , KVT_STRING            ,    SAVE  ,  1,  "" },
    { PROP_STATE_USER_TIME       , "sta.user.time"  , KVT_UINT32            , RO|SAVE  ,  1,  "0" },
    { PROP_STATE_TIME            , "sta.time"       , KVT_UINT32            , RO       ,  1,  "0" },
    { PROP_STATE_GPS             , "sta.gpsloc"     , KVT_GPS               , RO|SAVE  ,  1,  "" }, 
    { PROP_STATE_GPS_DIAGNOSTIC  , "sta.gpsdiag"    , KVT_UINT32            , RO       ,  5,  "0,0,0,0,0" }, 
    { PROP_STATE_QUEUED_EVENTS   , "sta.evtqueue"   , KVT_UINT32            , RO       ,  2,  "0,0" }, 
    { PROP_STATE_DEV_DIAGNOSTIC  , "sta.devdiag"    , KVT_UINT32            , RO|SAVE  ,  5,  "0,0,0,0,0" }, 

    // --- Communication protocol properties
    { PROP_COMM_SPEAK_FIRST      , "com.first"      , KVT_BOOLEAN           ,    SAVE  ,  1,  "1" },
    { PROP_COMM_FIRST_BRIEF      , "com.brief"      , KVT_BOOLEAN           ,    SAVE  ,  1,  "0" },
    { PROP_COMM_MAX_CONNECTIONS  , "com.maxconn"    , KVT_UINT8             ,    SAVE  ,  3,  "8,4,60" }, // total/duplex/minutes
    { PROP_COMM_MIN_XMIT_DELAY   , "com.mindelay"   , KVT_UINT16            ,    SAVE  ,  1,  "180" },
    { PROP_COMM_MIN_XMIT_RATE    , "com.minrate"    , KVT_UINT32            ,    SAVE  ,  1,  "180" },
    { PROP_COMM_MAX_XMIT_RATE    , "com.maxrate"    , KVT_UINT32            ,    SAVE  ,  1,  "3600" },
    { PROP_COMM_MAX_DUP_EVENTS   , "com.maxduplex"  , KVT_UINT8             ,    SAVE  ,  1,  "10" },
    { PROP_COMM_MAX_SIM_EVENTS   , "com.maxsimplex" , KVT_UINT8             ,    SAVE  ,  1,  "2" },

    // --- Communication connection properties
    { PROP_COMM_SETTINGS         , "com.settings"   , KVT_STRING            ,    SAVE  ,  1,  "" },
    { PROP_COMM_HOST             , "com.host"       , KVT_STRING            ,    SAVE  ,  1,  DFT_COMM_HOST },
    { PROP_COMM_PORT             , "com.port"       , KVT_UINT16            ,    SAVE  ,  1,  DFT_COMM_PORT },
    { PROP_COMM_DNS_1            , "com.dns1"       , KVT_STRING            ,    SAVE  ,  1,  "" },
    { PROP_COMM_DNS_2            , "com.dns2"       , KVT_STRING            ,    SAVE  ,  1,  "" },
    { PROP_COMM_CONNECTION       , "com.connection" , KVT_STRING            ,    SAVE  ,  1,  "" },
    { PROP_COMM_APN_NAME         , "com.apnname"    , KVT_STRING            ,    SAVE  ,  1,  "" },
    { PROP_COMM_APN_SERVER       , "com.apnserv"    , KVT_STRING            ,    SAVE  ,  1,  "" },
    { PROP_COMM_APN_USER         , "com.apnuser"    , KVT_STRING            ,    SAVE  ,  1,  "" },
    { PROP_COMM_APN_PASSWORD     , "com.apnpass"    , KVT_STRING            ,    SAVE  ,  1,  "" },
    { PROP_COMM_APN_PHONE        , "com.apnphone"   , KVT_STRING            ,    SAVE  ,  1,  "" }, // "*99***1#"
    { PROP_COMM_APN_SETTINGS     , "com.apnsett"    , KVT_STRING            ,    SAVE  ,  1,  "" },
    { PROP_COMM_MIN_SIGNAL       , "com.minsignal"  , KVT_INT16             ,    SAVE  ,  1,  "7" },
    { PROP_COMM_ACCESS_PIN       , "com.pin"        , KVT_BINARY            ,    SAVE  ,  8,  DFT_ACCESS_PIN },

    // --- Packet/Data format properties
    { PROP_COMM_CUSTOM_FORMATS   , "com.custfmt"    , KVT_UINT8             ,    SAVE  ,  1,  "0" },
    { PROP_COMM_ENCODINGS        , "com.encodng"    , KVT_UINT8             ,    SAVE  ,  1,  "0x7" },
    { PROP_COMM_BYTES_READ       , "com.rdcnt"      , KVT_UINT32            ,    SAVE  ,  1,  "0" },
    { PROP_COMM_BYTES_WRITTEN    , "com.wrcnt"      , KVT_UINT32            ,    SAVE  ,  1,  "0" },

    // --- GPS properties
    { PROP_GPS_SAMPLE_RATE       , "gps.smprate"    , KVT_UINT16            ,    SAVE  ,  1,  "7" },
    { PROP_GPS_AQUIRE_WAIT       , "gps.aquwait"    , KVT_UINT16            ,    SAVE  ,  1,  "0" },
    { PROP_GPS_EXPIRATION        , "gps.expire"     , KVT_UINT16            ,    SAVE  ,  1,  "300" },
    { PROP_GPS_CLOCK_DELTA       , "gps.updclock"   , KVT_BOOLEAN           ,    SAVE  ,  1,  "15" },
    { PROP_GPS_ACCURACY          , "gps.accuracy"   , KVT_UINT16            ,    SAVE  ,  1,  "0" },
    { PROP_GPS_MIN_SPEED         , "gps.minspd"     , KVT_UINT16|KVT_DEC(1) ,    SAVE  ,  1,  "8.0" },
    { PROP_GPS_DISTANCE_DELTA    , "gps.dstdelt"    , KVT_UINT32            ,    SAVE  ,  1,  "500" },

    // --- GeoZone properties
    { PROP_CMD_GEOF_ADMIN        , "gf.admin"       , KVT_COMMAND           , WO       ,  1,  0 },
    { PROP_GEOF_COUNT            , "gf.count"       , KVT_UINT16            , RO       ,  1,  "0" },
    { PROP_GEOF_VERSION          , "gf.version"     , KVT_STRING            ,    SAVE  ,  1,  "" },
    { PROP_GEOF_ARRIVE_DELAY     , "gf.arr.delay"   , KVT_UINT32            ,    SAVE  ,  1,  "30" }, 
    { PROP_GEOF_DEPART_DELAY     , "gf.dep.delay"   , KVT_UINT32            ,    SAVE  ,  1,  "10" }, 
    { PROP_GEOF_CURRENT          , "gf.current"     , KVT_UINT32            ,    SAVE  ,  1,  "0" }, 

    // --- GeoCorr properties
    { PROP_CMD_GEOC_ADMIN        , "gc.admin"       , KVT_COMMAND           , WO       ,  1,  0 },
    { PROP_GEOC_ACTIVE_ID        , "gc.active"      , KVT_UINT32            ,    SAVE  ,  1,  "0" }, 
    { PROP_GEOC_VIOLATION_INTRVL , "gc.vio.rate"    , KVT_UINT16            ,    SAVE  ,  1,  "300" }, 
    { PROP_GEOC_VIOLATION_COUNT  , "gc.vio.cnt"     , KVT_UINT16            ,    SAVE  ,  1,  "0" }, 

    // --- Motion properties
    { PROP_MOTION_START_TYPE     , "mot.start.type" , KVT_UINT8             ,    SAVE  ,  1,  "0" },
    { PROP_MOTION_START          , "mot.start"      , KVT_UINT16|KVT_DEC(1) ,    SAVE  ,  1,  "0.0" },
    { PROP_MOTION_IN_MOTION      , "mot.inmotion"   , KVT_UINT16            ,    SAVE  ,  1,  "0" },
    { PROP_MOTION_STOP           , "mot.stop"       , KVT_UINT16            ,    SAVE  ,  1,  "600" },
    { PROP_MOTION_STOP_TYPE      , "mot.stop.type"  , KVT_UINT8             ,    SAVE  ,  1,  "0" },
    { PROP_MOTION_DORMANT_INTRVL , "mot.dorm.rate"  , KVT_UINT32            ,    SAVE  ,  1,  "0" },
    { PROP_MOTION_DORMANT_COUNT  , "mot.dorm.cnt"   , KVT_UINT16            ,    SAVE  ,  1,  "1" },
    { PROP_MOTION_EXCESS_SPEED   , "mot.exspeed"    , KVT_UINT16|KVT_DEC(1) ,    SAVE  ,  1,  "0.0" },
    { PROP_MOTION_MOVING_INTRVL  , "mot.moving"     , KVT_UINT16            ,    SAVE  ,  1,  "0" },

    // --- Odometer properties
    { PROP_ODOMETER_0_VALUE      , "odo.0.value"    , KVT_UINT32            ,    SAVE  ,  1,  "0" },
    { PROP_ODOMETER_1_VALUE      , "odo.1.value"    , KVT_UINT32            ,    SAVE  ,  1,  "0" },
    { PROP_ODOMETER_2_VALUE      , "odo.2.value"    , KVT_UINT32            ,    SAVE  ,  1,  "0" },
    { PROP_ODOMETER_3_VALUE      , "odo.3.value"    , KVT_UINT32            ,    SAVE  ,  1,  "0" },
    { PROP_ODOMETER_4_VALUE      , "odo.4.value"    , KVT_UINT32            ,    SAVE  ,  1,  "0" },
    { PROP_ODOMETER_5_VALUE      , "odo.5.value"    , KVT_UINT32            ,    SAVE  ,  1,  "0" },
    { PROP_ODOMETER_6_VALUE      , "odo.6.value"    , KVT_UINT32            ,    SAVE  ,  1,  "0" },
    { PROP_ODOMETER_7_VALUE      , "odo.7.value"    , KVT_UINT32            ,    SAVE  ,  1,  "0" },
    { PROP_ODOMETER_0_LIMIT      , "odo.0.limit"    , KVT_UINT32            ,    SAVE  ,  1,  "0" },
    { PROP_ODOMETER_1_LIMIT      , "odo.1.limit"    , KVT_UINT32            ,    SAVE  ,  1,  "0" },
    { PROP_ODOMETER_2_LIMIT      , "odo.2.limit"    , KVT_UINT32            ,    SAVE  ,  1,  "0" },
    { PROP_ODOMETER_3_LIMIT      , "odo.3.limit"    , KVT_UINT32            ,    SAVE  ,  1,  "0" },
    { PROP_ODOMETER_4_LIMIT      , "odo.4.limit"    , KVT_UINT32            ,    SAVE  ,  1,  "0" },
    { PROP_ODOMETER_5_LIMIT      , "odo.5.limit"    , KVT_UINT32            ,    SAVE  ,  1,  "0" },
    { PROP_ODOMETER_6_LIMIT      , "odo.6.limit"    , KVT_UINT32            ,    SAVE  ,  1,  "0" },
    { PROP_ODOMETER_7_LIMIT      , "odo.7.limit"    , KVT_UINT32            ,    SAVE  ,  1,  "0" },
    { PROP_ODOMETER_0_GPS        , "odo.0.gps"      , KVT_GPS               , RO|SAVE  ,  1,  "0" },
    { PROP_ODOMETER_1_GPS        , "odo.1.gps"      , KVT_GPS               , RO|SAVE  ,  1,  "0" },
    { PROP_ODOMETER_2_GPS        , "odo.2.gps"      , KVT_GPS               , RO|SAVE  ,  1,  "0" },
    { PROP_ODOMETER_3_GPS        , "odo.3.gps"      , KVT_GPS               , RO|SAVE  ,  1,  "0" },
    { PROP_ODOMETER_4_GPS        , "odo.4.gps"      , KVT_GPS               , RO|SAVE  ,  1,  "0" },
    { PROP_ODOMETER_5_GPS        , "odo.5.gps"      , KVT_GPS               , RO|SAVE  ,  1,  "0" },
    { PROP_ODOMETER_6_GPS        , "odo.6.gps"      , KVT_GPS               , RO|SAVE  ,  1,  "0" },
    { PROP_ODOMETER_7_GPS        , "odo.7.gps"      , KVT_GPS               , RO|SAVE  ,  1,  "0" },

    // --- Digital input properties
    { PROP_INPUT_STATE           , "inp.state"      , KVT_UINT32            , RO       ,  1,  "0" }, // DON"T SAVE
    { PROP_INPUT_CONFIG_0        , "inp.0.conf"     , KVT_UINT32            ,    SAVE  ,  2,  "0,0" },
    { PROP_INPUT_CONFIG_1        , "inp.1.conf"     , KVT_UINT32            ,    SAVE  ,  2,  "0,0" },
    { PROP_INPUT_CONFIG_2        , "inp.2.conf"     , KVT_UINT32            ,    SAVE  ,  2,  "0,0" },
    { PROP_INPUT_CONFIG_3        , "inp.3.conf"     , KVT_UINT32            ,    SAVE  ,  2,  "0,0" },
    { PROP_INPUT_CONFIG_4        , "inp.4.conf"     , KVT_UINT32            ,    SAVE  ,  2,  "0,0" },
    { PROP_INPUT_CONFIG_5        , "inp.5.conf"     , KVT_UINT32            ,    SAVE  ,  2,  "0,0" },
    { PROP_INPUT_CONFIG_6        , "inp.6.conf"     , KVT_UINT32            ,    SAVE  ,  2,  "0,0" },
    { PROP_INPUT_CONFIG_7        , "inp.7.conf"     , KVT_UINT32            ,    SAVE  ,  2,  "0,0" },
  //{ PROP_INPUT_CONFIG_8        , "inp.8.conf"     , KVT_UINT32            ,    SAVE  ,  2,  "0,0" },
  //{ PROP_INPUT_CONFIG_9        , "inp.9.conf"     , KVT_UINT32            ,    SAVE  ,  2,  "0,0" },
  //{ PROP_INPUT_CONFIG_A        , "inp.A.conf"     , KVT_UINT32            ,    SAVE  ,  2,  "0,0" },
  //{ PROP_INPUT_CONFIG_B        , "inp.B.conf"     , KVT_UINT32            ,    SAVE  ,  2,  "0,0" },
  //{ PROP_INPUT_CONFIG_C        , "inp.C.conf"     , KVT_UINT32            ,    SAVE  ,  2,  "0,0" },
  //{ PROP_INPUT_CONFIG_D        , "inp.D.conf"     , KVT_UINT32            ,    SAVE  ,  2,  "0,0" },
  //{ PROP_INPUT_CONFIG_E        , "inp.E.conf"     , KVT_UINT32            ,    SAVE  ,  2,  "0,0" },
  //{ PROP_INPUT_CONFIG_F        , "inp.F.conf"     , KVT_UINT32            ,    SAVE  ,  2,  "0,0" },

    // --- Digitaloutput properties
    { PROP_OUTPUT_CONFIG_0       , "out.0.conf"     , KVT_UINT32            ,    SAVE  ,  2,  "0,0" },
    { PROP_OUTPUT_CONFIG_1       , "out.1.conf"     , KVT_UINT32            ,    SAVE  ,  2,  "0,0" },
    { PROP_OUTPUT_CONFIG_2       , "out.2.conf"     , KVT_UINT32            ,    SAVE  ,  2,  "0,0" },
    { PROP_OUTPUT_CONFIG_3       , "out.3.conf"     , KVT_UINT32            ,    SAVE  ,  2,  "0,0" },
    { PROP_OUTPUT_CONFIG_4       , "out.4.conf"     , KVT_UINT32            ,    SAVE  ,  2,  "0,0" },
    { PROP_OUTPUT_CONFIG_5       , "out.5.conf"     , KVT_UINT32            ,    SAVE  ,  2,  "0,0" },
    { PROP_OUTPUT_CONFIG_6       , "out.6.conf"     , KVT_UINT32            ,    SAVE  ,  2,  "0,0" },
    { PROP_OUTPUT_CONFIG_7       , "out.7.conf"     , KVT_UINT32            ,    SAVE  ,  2,  "0,0" },

    // --- Elapsed time properties
    { PROP_ELAPSED_0_VALUE       , "ela.0.value"    , KVT_UINT32            ,    SAVE  ,  1,  "0" },
    { PROP_ELAPSED_1_VALUE       , "ela.1.value"    , KVT_UINT32            ,    SAVE  ,  1,  "0" },
    { PROP_ELAPSED_2_VALUE       , "ela.2.value"    , KVT_UINT32            ,    SAVE  ,  1,  "0" },
    { PROP_ELAPSED_3_VALUE       , "ela.3.value"    , KVT_UINT32            ,    SAVE  ,  1,  "0" },