scan_conf.cpp

這是一個arm模擬器 以C++實做 主要模擬ARM9架構

       97,   97,   97
    } ;

static yy_state_type yy_last_accepting_state;
static char *yy_last_accepting_cpos;

/* The intent behind this definition is that it'll catch
 * any uses of REJECT which flex missed.
 */
#define REJECT reject_used_but_not_detected
#define yymore() yymore_used_but_not_detected
#define YY_MORE_ADJ 0
#define YY_RESTORE_YY_MORE_OFFSET
char *yytext;
#line 1 "scan_conf.l"
#define INITIAL 0
#line 2 "scan_conf.l"

#include <cstring>
#include <cstdio>
#include <cctype>
#include <vector>
#include "parse_conf.hpp"

int mylineno;

static std::vector<char> *lex_str(char *val, unsigned int len);

#define YY_NO_UNPUT
#define yyin conf_in

#define comment 1

#define directive 2

#line 509 "scan_conf.cpp"

/* Macros after this point can all be overridden by user definitions in
 * section 1.
 */

#ifndef YY_SKIP_YYWRAP
#ifdef __cplusplus
extern "C" int yywrap YY_PROTO(( void ));
#else
extern int yywrap YY_PROTO(( void ));
#endif
#endif

#ifndef YY_NO_UNPUT
static void yyunput YY_PROTO(( int c, char *buf_ptr ));
#endif

#ifndef yytext_ptr
static void yy_flex_strncpy YY_PROTO(( char *, yyconst char *, int ));
#endif

#ifdef YY_NEED_STRLEN
static int yy_flex_strlen YY_PROTO(( yyconst char * ));
#endif

#ifndef YY_NO_INPUT
#ifdef __cplusplus
static int yyinput YY_PROTO(( void ));
#else
static int input YY_PROTO(( void ));
#endif
#endif

#if YY_STACK_USED
static int yy_start_stack_ptr = 0;
static int yy_start_stack_depth = 0;
static int *yy_start_stack = 0;
#ifndef YY_NO_PUSH_STATE
static void yy_push_state YY_PROTO(( int new_state ));
#endif
#ifndef YY_NO_POP_STATE
static void yy_pop_state YY_PROTO(( void ));
#endif
#ifndef YY_NO_TOP_STATE
static int yy_top_state YY_PROTO(( void ));
#endif

#else
#define YY_NO_PUSH_STATE 1
#define YY_NO_POP_STATE 1
#define YY_NO_TOP_STATE 1
#endif

#ifdef YY_MALLOC_DECL
YY_MALLOC_DECL
#else
#if __STDC__
#ifndef __cplusplus
#include <stdlib.h>
#endif
#else
/* Just try to get by without declaring the routines.  This will fail
 * miserably on non-ANSI systems for which sizeof(size_t) != sizeof(int)
 * or sizeof(void*) != sizeof(int).
 */
#endif
#endif

/* Amount of stuff to slurp up with each read. */
#ifndef YY_READ_BUF_SIZE
#define YY_READ_BUF_SIZE 8192
#endif

/* Copy whatever the last rule matched to the standard output. */

#ifndef ECHO
/* This used to be an fputs(), but since the string might contain NUL's,
 * we now use fwrite().
 */
#define ECHO (void) fwrite( yytext, yyleng, 1, yyout )
#endif

/* Gets input and stuffs it into "buf".  number of characters read, or YY_NULL,
 * is returned in "result".
 */
#ifndef YY_INPUT
#define YY_INPUT(buf,result,max_size) \
	if ( yy_current_buffer->yy_is_interactive ) \
		{ \
		int c = '*', n; \
		for ( n = 0; n < max_size && \
			     (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
			buf[n] = (char) c; \
		if ( c == '\n' ) \
			buf[n++] = (char) c; \
		if ( c == EOF && ferror( yyin ) ) \
			YY_FATAL_ERROR( "input in flex scanner failed" ); \
		result = n; \
		} \
	else if ( ((result = fread( buf, 1, max_size, yyin )) == 0) \
		  && ferror( yyin ) ) \
		YY_FATAL_ERROR( "input in flex scanner failed" );
#endif

/* No semi-colon after return; correct usage is to write "yyterminate();" -
 * we don't want an extra ';' after the "return" because that will cause
 * some compilers to complain about unreachable statements.
 */
#ifndef yyterminate
#define yyterminate() return YY_NULL
#endif

/* Number of entries by which start-condition stack grows. */
#ifndef YY_START_STACK_INCR
#define YY_START_STACK_INCR 25
#endif

/* Report a fatal error. */
#ifndef YY_FATAL_ERROR
#define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
#endif

/* Default declaration of generated scanner - a define so the user can
 * easily add parameters.
 */
#ifndef YY_DECL
#define YY_DECL int yylex YY_PROTO(( void ))
#endif

/* Code executed at the beginning of each rule, after yytext and yyleng
 * have been set up.
 */
#ifndef YY_USER_ACTION
#define YY_USER_ACTION
#endif

/* Code executed at the end of each rule. */
#ifndef YY_BREAK
#define YY_BREAK break;
#endif

#define YY_RULE_SETUP \
	YY_USER_ACTION

YY_DECL
	{
	register yy_state_type yy_current_state;
	register char *yy_cp = NULL, *yy_bp = NULL;
	register int yy_act;

#line 33 "scan_conf.l"


#line 663 "scan_conf.cpp"

	if ( yy_init )
		{
		yy_init = 0;

#ifdef YY_USER_INIT
		YY_USER_INIT;
#endif

		if ( ! yy_start )
			yy_start = 1;	/* first start state */

		if ( ! yyin )
			yyin = stdin;

		if ( ! yyout )
			yyout = stdout;

		if ( ! yy_current_buffer )
			yy_current_buffer =
				yy_create_buffer( yyin, YY_BUF_SIZE );

		yy_load_buffer_state();
		}

	while ( 1 )		/* loops until end-of-file is reached */
		{
		yy_cp = yy_c_buf_p;

		/* Support of yytext. */
		*yy_cp = yy_hold_char;

		/* yy_bp points to the position in yy_ch_buf of the start of
		 * the current run.
		 */
		yy_bp = yy_cp;

		yy_current_state = yy_start;
yy_match:
		do
			{
			register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
			if ( yy_accept[yy_current_state] )
				{
				yy_last_accepting_state = yy_current_state;
				yy_last_accepting_cpos = yy_cp;
				}
			while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
				{
				yy_current_state = (int) yy_def[yy_current_state];
				if ( yy_current_state >= 98 )
					yy_c = yy_meta[(unsigned int) yy_c];
				}
			yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
			++yy_cp;
			}
		while ( yy_base[yy_current_state] != 280 );

yy_find_action:
		yy_act = yy_accept[yy_current_state];
		if ( yy_act == 0 )
			{ /* have to back up */
			yy_cp = yy_last_accepting_cpos;
			yy_current_state = yy_last_accepting_state;
			yy_act = yy_accept[yy_current_state];
			}

		YY_DO_BEFORE_ACTION;


do_action:	/* This label is used only to access EOF actions. */


		switch ( yy_act )
	{ /* beginning of action switch */
			case 0: /* must back up */
			/* undo the effects of YY_DO_BEFORE_ACTION */
			*yy_cp = yy_hold_char;
			yy_cp = yy_last_accepting_cpos;
			yy_current_state = yy_last_accepting_state;
			goto yy_find_action;

case 1:
YY_RULE_SETUP
#line 35 "scan_conf.l"
return CPU;
	YY_BREAK
case 2:
YY_RULE_SETUP
#line 36 "scan_conf.l"
return MACH;
	YY_BREAK
case 3:
YY_RULE_SETUP
#line 37 "scan_conf.l"
return MEM;
	YY_BREAK
case 4:
YY_RULE_SETUP
#line 38 "scan_conf.l"
return MAP;
	YY_BREAK
case 5:
YY_RULE_SETUP
#line 39 "scan_conf.l"
return TYPE;
	YY_BREAK
case 6:
YY_RULE_SETUP
#line 40 "scan_conf.l"
return ADDR;
	YY_BREAK
case 7:
YY_RULE_SETUP
#line 41 "scan_conf.l"
return ADDR;
	YY_BREAK
case 8:
YY_RULE_SETUP
#line 42 "scan_conf.l"
return SIZE;
	YY_BREAK
case 9:
YY_RULE_SETUP
#line 43 "scan_conf.l"
return IMG;
	YY_BREAK
case 10:
YY_RULE_SETUP
#line 44 "scan_conf.l"
return ELF;
	YY_BREAK
case 11:
YY_RULE_SETUP
#line 45 "scan_conf.l"
return VAL;
	YY_BREAK
case 12:
YY_RULE_SETUP
#line 46 "scan_conf.l"
return PRE;
	YY_BREAK
case 13:
YY_RULE_SETUP
#line 47 "scan_conf.l"
return REG;
	YY_BREAK
case 14:
YY_RULE_SETUP
#line 49 "scan_conf.l"
return COLON;
	YY_BREAK
case 15:
YY_RULE_SETUP
#line 50 "scan_conf.l"
return SEMI;
	YY_BREAK
case 16:
YY_RULE_SETUP
#line 51 "scan_conf.l"
return COMMA;
	YY_BREAK
case 17:
YY_RULE_SETUP
#line 52 "scan_conf.l"
return EQUAL;
	YY_BREAK
case 18:
YY_RULE_SETUP
#line 54 "scan_conf.l"
conf_lval.nnstr  = lex_str(yytext, yyleng); return STR;
	YY_BREAK
case 19:
YY_RULE_SETUP
#line 55 "scan_conf.l"
conf_lval.strval = strdup(yytext); return IDENT;
	YY_BREAK
case 20:
YY_RULE_SETUP
#line 56 "scan_conf.l"
conf_lval.strval = strdup(yytext); return HCONST;
	YY_BREAK
case 21:
YY_RULE_SETUP
#line 57 "scan_conf.l"
conf_lval.strval = strdup(yytext); return DCONST;
	YY_BREAK
case 22:
YY_RULE_SETUP
#line 58 "scan_conf.l"
conf_lval.strval = strdup(yytext); return PATH;
	YY_BREAK
case 23:
YY_RULE_SETUP
#line 60 "scan_conf.l"
BEGIN(comment);
	YY_BREAK
case 24:
YY_RULE_SETUP
#line 61 "scan_conf.l"
mylineno++;
	YY_BREAK
case 25:
YY_RULE_SETUP
#line 62 "scan_conf.l"
/*ignore*/
	YY_BREAK
case 26:
YY_RULE_SETUP
#line 63 "scan_conf.l"
BEGIN(INITIAL);
	YY_BREAK
case 27:
YY_RULE_SETUP
#line 65 "scan_conf.l"
BEGIN(directive);
	YY_BREAK
case 28:
YY_RULE_SETUP
#line 66 "scan_conf.l"
/*ignore*/
	YY_BREAK
case 29:
YY_RULE_SETUP
#line 67 "scan_conf.l"
mylineno++; BEGIN(INITIAL);
	YY_BREAK
case 30:
YY_RULE_SETUP
#line 69 "scan_conf.l"
mylineno++;
	YY_BREAK
case 31:
YY_RULE_SETUP
#line 70 "scan_conf.l"
/*ignore*/
	YY_BREAK
case YY_STATE_EOF(INITIAL):
case YY_STATE_EOF(comment):
case YY_STATE_EOF(directive):
#line 71 "scan_conf.l"
return 0;
	YY_BREAK
case 32:
YY_RULE_SETUP
#line 73 "scan_conf.l"
/*ignore*/
	YY_BREAK
case 33:
YY_RULE_SETUP
#line 75 "scan_conf.l"
ECHO;
	YY_BREAK
#line 917 "scan_conf.cpp"

	case YY_END_OF_BUFFER:
		{
		/* Amount of text matched not including the EOB char. */
		int yy_amount_of_matched_text = (int) (yy_cp - yytext_ptr) - 1;

		/* Undo the effects of YY_DO_BEFORE_ACTION. */
		*yy_cp = yy_hold_char;
		YY_RESTORE_YY_MORE_OFFSET

		if ( yy_current_buffer->yy_buffer_status == YY_BUFFER_NEW )
			{
			/* We're scanning a new file or input source.  It's
			 * possible that this happened because the user
			 * just pointed yyin at a new source and called
			 * yylex().  If so, then we have to assure
			 * consistency between yy_current_buffer and our
			 * globals.  Here is the right place to do so, because
			 * this is the first action (other than possibly a
			 * back-up) that will match for the new input source.
			 */
			yy_n_chars = yy_current_buffer->yy_n_chars;
			yy_current_buffer->yy_input_file = yyin;
			yy_current_buffer->yy_buffer_status = YY_BUFFER_NORMAL;
			}

		/* Note that here we test for yy_c_buf_p "<=" to the position
		 * of the first EOB in the buffer, since yy_c_buf_p will