mmzone.h

来自「此工具是arm-linux-GCC交叉编译工具(cross-3.4.4)」· C头文件 代码 · 共 610 行 · 第 1/2 页

H
610
字号
#ifndef _LINUX_MMZONE_H#define _LINUX_MMZONE_H#ifdef __KERNEL__#ifndef __ASSEMBLY__#include <linux/config.h>#include <linux/spinlock.h>#include <linux/list.h>#include <linux/wait.h>#include <linux/cache.h>#include <linux/threads.h>#include <linux/numa.h>#include <linux/init.h>#include <asm/atomic.h>/* Free memory management - zoned buddy allocator.  */#ifndef CONFIG_FORCE_MAX_ZONEORDER#define MAX_ORDER 11#else#define MAX_ORDER CONFIG_FORCE_MAX_ZONEORDER#endifstruct free_area {	struct list_head	free_list;	unsigned long		nr_free;};struct pglist_data;/* * zone->lock and zone->lru_lock are two of the hottest locks in the kernel. * So add a wild amount of padding here to ensure that they fall into separate * cachelines.  There are very few zone structures in the machine, so space * consumption is not a concern here. */#if defined(CONFIG_SMP)struct zone_padding {	char x[0];} ____cacheline_maxaligned_in_smp;#define ZONE_PADDING(name)	struct zone_padding name;#else#define ZONE_PADDING(name)#endifstruct per_cpu_pages {	int count;		/* number of pages in the list */	int low;		/* low watermark, refill needed */	int high;		/* high watermark, emptying needed */	int batch;		/* chunk size for buddy add/remove */	struct list_head list;	/* the list of pages */};struct per_cpu_pageset {	struct per_cpu_pages pcp[2];	/* 0: hot.  1: cold */#ifdef CONFIG_NUMA	unsigned long numa_hit;		/* allocated in intended node */	unsigned long numa_miss;	/* allocated in non intended node */	unsigned long numa_foreign;	/* was intended here, hit elsewhere */	unsigned long interleave_hit; 	/* interleaver prefered this zone */	unsigned long local_node;	/* allocation from local node */	unsigned long other_node;	/* allocation from other node */#endif} ____cacheline_aligned_in_smp;#ifdef CONFIG_NUMA#define zone_pcp(__z, __cpu) ((__z)->pageset[(__cpu)])#else#define zone_pcp(__z, __cpu) (&(__z)->pageset[(__cpu)])#endif#define ZONE_DMA		0#define ZONE_NORMAL		1#define ZONE_HIGHMEM		2#define MAX_NR_ZONES		3	/* Sync this with ZONES_SHIFT */#define ZONES_SHIFT		2	/* ceil(log2(MAX_NR_ZONES)) *//* * When a memory allocation must conform to specific limitations (such * as being suitable for DMA) the caller will pass in hints to the * allocator in the gfp_mask, in the zone modifier bits.  These bits * are used to select a priority ordered list of memory zones which * match the requested limits.  GFP_ZONEMASK defines which bits within * the gfp_mask should be considered as zone modifiers.  Each valid * combination of the zone modifier bits has a corresponding list * of zones (in node_zonelists).  Thus for two zone modifiers there * will be a maximum of 4 (2 ** 2) zonelists, for 3 modifiers there will * be 8 (2 ** 3) zonelists.  GFP_ZONETYPES defines the number of possible * combinations of zone modifiers in "zone modifier space". */#define GFP_ZONEMASK	0x03/* * As an optimisation any zone modifier bits which are only valid when * no other zone modifier bits are set (loners) should be placed in * the highest order bits of this field.  This allows us to reduce the * extent of the zonelists thus saving space.  For example in the case * of three zone modifier bits, we could require up to eight zonelists. * If the left most zone modifier is a "loner" then the highest valid * zonelist would be four allowing us to allocate only five zonelists. * Use the first form when the left most bit is not a "loner", otherwise * use the second. *//* #define GFP_ZONETYPES	(GFP_ZONEMASK + 1) */		/* Non-loner */#define GFP_ZONETYPES	((GFP_ZONEMASK + 1) / 2 + 1)		/* Loner *//* * On machines where it is needed (eg PCs) we divide physical memory * into multiple physical zones. On a PC we have 3 zones: * * ZONE_DMA	  < 16 MB	ISA DMA capable memory * ZONE_NORMAL	16-896 MB	direct mapped by the kernel * ZONE_HIGHMEM	 > 896 MB	only page cache and user processes */struct zone {	/* Fields commonly accessed by the page allocator */	unsigned long		free_pages;	unsigned long		pages_min, pages_low, pages_high;	/*	 * We don't know if the memory that we're going to allocate will be freeable	 * or/and it will be released eventually, so to avoid totally wasting several	 * GB of ram we must reserve some of the lower zone memory (otherwise we risk	 * to run OOM on the lower zones despite there's tons of freeable ram	 * on the higher zones). This array is recalculated at runtime if the	 * sysctl_lowmem_reserve_ratio sysctl changes.	 */	unsigned long		lowmem_reserve[MAX_NR_ZONES];#ifdef CONFIG_NUMA	struct per_cpu_pageset	*pageset[NR_CPUS];#else	struct per_cpu_pageset	pageset[NR_CPUS];#endif	/*	 * free areas of different sizes	 */	spinlock_t		lock;	struct free_area	free_area[MAX_ORDER];	ZONE_PADDING(_pad1_)	/* Fields commonly accessed by the page reclaim scanner */	spinlock_t		lru_lock;		struct list_head	active_list;	struct list_head	inactive_list;	unsigned long		nr_scan_active;	unsigned long		nr_scan_inactive;	unsigned long		nr_active;	unsigned long		nr_inactive;	unsigned long		pages_scanned;	   /* since last reclaim */	int			all_unreclaimable; /* All pages pinned */	/*	 * Does the allocator try to reclaim pages from the zone as soon	 * as it fails a watermark_ok() in __alloc_pages?	 */	int			reclaim_pages;	/* A count of how many reclaimers are scanning this zone */	atomic_t		reclaim_in_progress;	/*	 * prev_priority holds the scanning priority for this zone.  It is	 * defined as the scanning priority at which we achieved our reclaim	 * target at the previous try_to_free_pages() or balance_pgdat()	 * invokation.	 *	 * We use prev_priority as a measure of how much stress page reclaim is	 * under - it drives the swappiness decision: whether to unmap mapped	 * pages.	 *	 * temp_priority is used to remember the scanning priority at which	 * this zone was successfully refilled to free_pages == pages_high.	 *	 * Access to both these fields is quite racy even on uniprocessor.  But	 * it is expected to average out OK.	 */	int temp_priority;	int prev_priority;	ZONE_PADDING(_pad2_)	/* Rarely used or read-mostly fields */	/*	 * wait_table		-- the array holding the hash table	 * wait_table_size	-- the size of the hash table array	 * wait_table_bits	-- wait_table_size == (1 << wait_table_bits)	 *	 * The purpose of all these is to keep track of the people	 * waiting for a page to become available and make them	 * runnable again when possible. The trouble is that this	 * consumes a lot of space, especially when so few things	 * wait on pages at a given time. So instead of using	 * per-page waitqueues, we use a waitqueue hash table.	 *	 * The bucket discipline is to sleep on the same queue when	 * colliding and wake all in that wait queue when removing.	 * When something wakes, it must check to be sure its page is	 * truly available, a la thundering herd. The cost of a	 * collision is great, but given the expected load of the	 * table, they should be so rare as to be outweighed by the	 * benefits from the saved space.	 *	 * __wait_on_page_locked() and unlock_page() in mm/filemap.c, are the	 * primary users of these fields, and in mm/page_alloc.c	 * free_area_init_core() performs the initialization of them.	 */	wait_queue_head_t	* wait_table;	unsigned long		wait_table_size;	unsigned long		wait_table_bits;	/*	 * Discontig memory support fields.	 */	struct pglist_data	*zone_pgdat;	struct page		*zone_mem_map;	/* zone_start_pfn == zone_start_paddr >> PAGE_SHIFT */	unsigned long		zone_start_pfn;	unsigned long		spanned_pages;	/* total size, including holes */	unsigned long		present_pages;	/* amount of memory (excluding holes) */	/*	 * rarely used fields:	 */	char			*name;} ____cacheline_maxaligned_in_smp;/* * The "priority" of VM scanning is how much of the queues we will scan in one * go. A value of 12 for DEF_PRIORITY implies that we will scan 1/4096th of the * queues ("queue_length >> 12") during an aging round. */#define DEF_PRIORITY 12/* * One allocation request operates on a zonelist. A zonelist * is a list of zones, the first one is the 'goal' of the * allocation, the other zones are fallback zones, in decreasing * priority. * * Right now a zonelist takes up less than a cacheline. We never * modify it apart from boot-up, and only a few indices are used, * so despite the zonelist table being relatively big, the cache * footprint of this construct is very small. */struct zonelist {	struct zone *zones[MAX_NUMNODES * MAX_NR_ZONES + 1]; // NULL delimited};/* * The pg_data_t structure is used in machines with CONFIG_DISCONTIGMEM * (mostly NUMA machines?) to denote a higher-level memory zone than the * zone denotes. * * On NUMA machines, each NUMA node would have a pg_data_t to describe * it's memory layout. * * Memory statistics and page replacement data structures are maintained on a * per-zone basis. */struct bootmem_data;typedef struct pglist_data {	struct zone node_zones[MAX_NR_ZONES];	struct zonelist node_zonelists[GFP_ZONETYPES];	int nr_zones;#ifdef CONFIG_FLAT_NODE_MEM_MAP	struct page *node_mem_map;#endif	struct bootmem_data *bdata;	unsigned long node_start_pfn;	unsigned long node_present_pages; /* total number of physical pages */	unsigned long node_spanned_pages; /* total size of physical page					     range, including holes */	int node_id;	struct pglist_data *pgdat_next;	wait_queue_head_t kswapd_wait;	struct task_struct *kswapd;	int kswapd_max_order;} pg_data_t;#define node_present_pages(nid)	(NODE_DATA(nid)->node_present_pages)#define node_spanned_pages(nid)	(NODE_DATA(nid)->node_spanned_pages)#ifdef CONFIG_FLAT_NODE_MEM_MAP#define pgdat_page_nr(pgdat, pagenr)	((pgdat)->node_mem_map + (pagenr))#else#define pgdat_page_nr(pgdat, pagenr)	pfn_to_page((pgdat)->node_start_pfn + (pagenr))#endif#define nid_page_nr(nid, pagenr) 	pgdat_page_nr(NODE_DATA(nid),(pagenr))extern struct pglist_data *pgdat_list;void __get_zone_counts(unsigned long *active, unsigned long *inactive,			unsigned long *free, struct pglist_data *pgdat);void get_zone_counts(unsigned long *active, unsigned long *inactive,			unsigned long *free);void build_all_zonelists(void);void wakeup_kswapd(struct zone *zone, int order);int zone_watermark_ok(struct zone *z, int order, unsigned long mark,		int alloc_type, int can_try_harder, int gfp_high);

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?