lcd_v.qsf

用EPM1270实现的1602液晶驱动Verilog

# Copyright (C) 1991-2005 Altera Corporation
# Your use of Altera Corporation's design tools, logic functions 
# and other software and tools, and its AMPP partner logic       
# functions, and any output files any of the foregoing           
# (including device programming or simulation files), and any    
# associated documentation or information are expressly subject  
# to the terms and conditions of the Altera Program License      
# Subscription Agreement, Altera MegaCore Function License       
# Agreement, or other applicable license agreement, including,   
# without limitation, that your use is for the sole purpose of   
# programming logic devices manufactured by Altera and sold by   
# Altera or its authorized distributors.  Please refer to the    
# applicable agreement for further details.


# The default values for assignments are stored in the file
#		lcd_v_assignment_defaults.qdf
# If this file doesn't exist, and for assignments not listed, see file
#		assignment_defaults.qdf

# Altera recommends that you do not modify this file. This
# file is updated automatically by the Quartus II software
# and any changes you make may be lost or overwritten.


# Project-Wide Assignments
# ========================
set_global_assignment -name ORIGINAL_QUARTUS_VERSION "5.0 SP0.21"
set_global_assignment -name PROJECT_CREATION_TIME_DATE "10:28:31  AUGUST 27, 2005"
set_global_assignment -name LAST_QUARTUS_VERSION 5.1
set_global_assignment -name VERILOG_FILE DIV16.v
set_global_assignment -name VERILOG_FILE lcd.v
set_global_assignment -name VERILOG_FILE div200.v
set_global_assignment -name BDF_FILE lcd_v.bdf

# Pin & Location Assignments
# ==========================
set_location_assignment PIN_109 -to data[0]
set_location_assignment PIN_108 -to data[1]
set_location_assignment PIN_111 -to data[2]
set_location_assignment PIN_113 -to data[3]
set_location_assignment PIN_114 -to data[4]
set_location_assignment PIN_117 -to data[5]
set_location_assignment PIN_119 -to data[6]
set_location_assignment PIN_120 -to data[7]
set_location_assignment PIN_125 -to lcd_e
set_location_assignment PIN_132 -to lcd_rs
set_location_assignment PIN_131 -to lcd_rw
set_location_assignment PIN_127 -to mclk
set_location_assignment PIN_110 -to rst

# Analysis & Synthesis Assignments
# ================================
set_global_assignment -name FAMILY "MAX II"
set_global_assignment -name TOP_LEVEL_ENTITY lcd_v

# Fitter Assignments
# ==================
set_global_assignment -name DEVICE EPM1270T144C5
set_global_assignment -name RESERVE_ALL_UNUSED_PINS "AS INPUT TRI-STATED"
set_global_assignment -name RESERVE_ASDO_AFTER_CONFIGURATION "AS OUTPUT DRIVING AN UNSPECIFIED SIGNAL"
set_global_assignment -name FITTER_EFFORT "STANDARD FIT"
set_global_assignment -name ERROR_CHECK_FREQUENCY_DIVISOR 1

# Assembler Assignments
# =====================
set_global_assignment -name ON_CHIP_BITSTREAM_DECOMPRESSION OFF
set_global_assignment -name CYCLONE_CONFIGURATION_DEVICE EPCS1
set_global_assignment -name RESERVE_ALL_UNUSED_PINS_NO_OUTPUT_GND "AS INPUT TRI-STATED"
set_global_assignment -name AUTO_RESTART_CONFIGURATION OFF

# Simulator Assignments
# =====================
set_global_assignment -name SIMULATOR_GENERATE_SIGNAL_ACTIVITY_FILE ON
set_global_assignment -name SIMULATOR_SIGNAL_ACTIVITY_FILE_OUTPUT_DESTINATION lcd_v.saf

# SignalTap II Assignments
# ========================
set_global_assignment -name ENABLE_SIGNALTAP On
set_global_assignment -name USE_SIGNALTAP_FILE stp1.stp