📄 dev_c3745_iofpga.c
字号:
/* * Cisco 3745 simulation platform. * Copyright (c) 2006 Christophe Fillot (cf@utc.fr) */#include <stdio.h>#include <stdlib.h>#include <string.h>#include <unistd.h>#include <sys/types.h>#include <termios.h>#include <fcntl.h>#include <pthread.h>#include "ptask.h"#include "cpu.h"#include "vm.h"#include "dynamips.h"#include "memory.h"#include "device.h"#include "dev_vtty.h"#include "nmc93cX6.h"#include "dev_c3745.h"/* Debugging flags */#define DEBUG_UNKNOWN 1#define DEBUG_ACCESS 0#define DEBUG_NET_IRQ 0/* Definitions for Motherboard EEPROM (0x00) */#define EEPROM_MB_DOUT 3#define EEPROM_MB_DIN 2#define EEPROM_MB_CLK 1#define EEPROM_MB_CS 0/* Definitions for I/O board EEPROM (0x01) */#define EEPROM_IO_DOUT 3#define EEPROM_IO_DIN 2#define EEPROM_IO_CLK 1#define EEPROM_IO_CS 8/* Definitions for Midplane EEPROM (0x02) */#define EEPROM_MP_DOUT 3#define EEPROM_MP_DIN 2#define EEPROM_MP_CLK 1#define EEPROM_MP_CS 9/* Definitions for Network Modules EEPROM */#define EEPROM_NM_DOUT 7#define EEPROM_NM_DIN 6#define EEPROM_NM_CLK 2#define EEPROM_NM_CS 4/* Network IRQ distribution */struct net_irq_distrib { u_int reg; u_int offset;};static struct net_irq_distrib net_irq_dist[C3745_MAX_NM_BAYS] = { { 0, 0 }, /* Slot 0: reg 0x20, 0x00XX */ { 1, 0 }, /* Slot 1: reg 0x22, 0x000X */ { 1, 4 }, /* Slot 2: reg 0x22, 0x00X0 */ { 1, 8 }, /* Slot 3: reg 0x22, 0x0X00 */ { 1, 12 }, /* Slot 4: reg 0x22, 0xX000 */};/* IO FPGA structure */struct c3745_iofpga_data { vm_obj_t vm_obj; struct vdevice dev; c3745_t *router; /* Network IRQ status */ m_uint16_t net_irq_status[2]; /* Interrupt mask */ m_uint16_t intr_mask,io_mask2; /* EEPROM select */ u_int eeprom_select; /* WIC select */ u_int wic_select; u_int wic_cmd_pos; u_int wic_cmd_valid; m_uint16_t wic_cmd[2];};/* Motherboard EEPROM definition */static const struct nmc93cX6_eeprom_def eeprom_mb_def = { EEPROM_MB_CLK, EEPROM_MB_CS, EEPROM_MB_DIN, EEPROM_MB_DOUT,};/* I/O board EEPROM definition */static const struct nmc93cX6_eeprom_def eeprom_io_def = { EEPROM_IO_CLK, EEPROM_IO_CS, EEPROM_IO_DIN, EEPROM_IO_DOUT,};/* Midplane EEPROM definition */static const struct nmc93cX6_eeprom_def eeprom_mp_def = { EEPROM_MP_CLK, EEPROM_MP_CS, EEPROM_MP_DIN, EEPROM_MP_DOUT,};/* System EEPROM group */static const struct nmc93cX6_group eeprom_sys_group = { EEPROM_TYPE_NMC93C46, 3, 0, EEPROM_DORD_NORMAL, EEPROM_DOUT_HIGH, EEPROM_DEBUG_DISABLED, "System EEPROM", { &eeprom_mb_def, &eeprom_io_def, &eeprom_mp_def }, };/* NM EEPROM definition */static const struct nmc93cX6_eeprom_def eeprom_nm_def = { EEPROM_NM_CLK, EEPROM_NM_CS, EEPROM_NM_DIN, EEPROM_NM_DOUT,};/* NM EEPROM */static const struct nmc93cX6_group eeprom_nm_group = { EEPROM_TYPE_NMC93C46, 1, 0, EEPROM_DORD_NORMAL, EEPROM_DOUT_HIGH, EEPROM_DEBUG_DISABLED, "NM EEPROM", { &eeprom_nm_def },};/* Update network interrupt status */static inline void dev_c3745_iofpga_net_update_irq(struct c3745_iofpga_data *d){ if ((d->net_irq_status[0] != 0xFFFF) || (d->net_irq_status[1] != 0xFFFF)) { vm_set_irq(d->router->vm,C3745_NETIO_IRQ); } else { vm_clear_irq(d->router->vm,C3745_NETIO_IRQ); }}/* Trigger a Network IRQ for the specified slot/port */void dev_c3745_iofpga_net_set_irq(struct c3745_iofpga_data *d, u_int slot,u_int port){ struct net_irq_distrib *irq_dist;#if DEBUG_NET_IRQ vm_log(d->router->vm,"IO_FPGA","setting NetIRQ for slot %u port %u\n", slot,port);#endif irq_dist = &net_irq_dist[slot]; d->net_irq_status[irq_dist->reg] &= ~(1 << (irq_dist->offset + port)); dev_c3745_iofpga_net_update_irq(d);}/* Clear a Network IRQ for the specified slot/port */void dev_c3745_iofpga_net_clear_irq(struct c3745_iofpga_data *d, u_int slot,u_int port){ struct net_irq_distrib *irq_dist;#if DEBUG_NET_IRQ vm_log(d->router->vm,"IO_FPGA","clearing NetIRQ for slot %u port %u\n", slot,port);#endif irq_dist = &net_irq_dist[slot]; d->net_irq_status[irq_dist->reg] |= (1 << (irq_dist->offset + port)); dev_c3745_iofpga_net_update_irq(d);}/* Read a WIC EEPROM */static m_uint16_t dev_c3745_read_wic_eeprom(struct c3745_iofpga_data *d){ struct cisco_eeprom *eeprom; u_int wic_port; u_int eeprom_offset; m_uint8_t val[2]; switch(d->wic_select) { case 0x1700: wic_port = 0x10; break; case 0x1D00: wic_port = 0x20; break; case 0x3500: wic_port = 0x30; break; default: wic_port = 0; } /* No WIC in slot or no EEPROM: fake an empty EEPROM */ if (!wic_port || !(eeprom = vm_slot_get_eeprom(d->router->vm,0,wic_port))) return(0xFFFF); /* EEPROM offset is in the lowest 6 bits */ eeprom_offset = d->wic_cmd[0] & 0x3F; cisco_eeprom_get_byte(eeprom,eeprom_offset,&val[0]); cisco_eeprom_get_byte(eeprom,eeprom_offset+1,&val[1]); return(((m_uint16_t)val[0] << 8) | val[1]);}/* * dev_c3745_iofpga_access() */static void *dev_c3745_iofpga_access(cpu_gen_t *cpu,struct vdevice *dev, m_uint32_t offset,u_int op_size,u_int op_type, m_uint64_t *data){ struct c3745_iofpga_data *d = dev->priv_data; u_int slot; if (op_type == MTS_READ) *data = 0x0; #if DEBUG_ACCESS if (op_type == MTS_READ) { cpu_log(cpu,"IO_FPGA","reading reg 0x%x at pc=0x%llx (size=%u)\n", offset,cpu_get_pc(cpu),op_size); } else { cpu_log(cpu,"IO_FPGA", "writing reg 0x%x at pc=0x%llx, data=0x%llx (size=%u)\n", offset,cpu_get_pc(cpu),*data,op_size); }#endif switch(offset) { /* Unknown */ case 0x000000: if (op_type == MTS_READ) *data = 0xFFFF; break; /* Unknown */ case 0x000004: if (op_type == MTS_READ) *data = 0xFFFF; break; /* * CompactFlash. * * Bit 0: Slot0 Compact Flash presence. * Bit 1: System Compact Flash presence. */ case 0x000012: if (op_type == MTS_READ) { *data = 0xFFFF; /* System Flash ? */ if (cpu->vm->pcmcia_disk_size[0]) *data &= ~0x02; /* Slot0 Flash ? */ if (cpu->vm->pcmcia_disk_size[1]) *data &= ~0x01; } break; /* Suppress the "****TDM FPGA download failed.." message */ case 0x000014: if (op_type == MTS_READ) *data = 0x00FF; break; /* Power supply status */ case 0x00000a: if (op_type == MTS_READ) *data = 0x0000; break; /* Fan status */ case 0x00000c: if (op_type == MTS_READ) *data = 0x0000; break; /* System EEPROMs */ case 0x00000e: if (op_type == MTS_WRITE) nmc93cX6_write(&d->router->sys_eeprom_group,(u_int)(*data)); else *data = nmc93cX6_read(&d->router->sys_eeprom_group); break; /* * Network interrupt status. * * Bit 0: 0 = GT96100 Ethernet ports. * Bit 8: 0 = AIM slot 0. * Bit 9: 0 = AIM slot 1. */ case 0x000020: if (op_type == MTS_READ) *data = d->net_irq_status[0]; break; /* * Network interrupt status. * * Bit 0: 0 = Interrupt for slot 1 * Bit 4: 0 = Interrupt for slot 2 * Bit 8: 0 = Interrupt for slot 3 * Bit 12: 0 = Interrupt for slot 4 */ case 0x000022: if (op_type == MTS_READ) *data = d->net_irq_status[1]; break; /* * Per Slot Intr Mask (seen with "sh platform"). * IO Mask 1 is the lower 8-bits. */ case 0x00002a: if (op_type == MTS_READ) *data = d->intr_mask; else d->intr_mask = *data; break; /* IO Mask 2 (seen with "sh platform") */ case 0x00002c: if (op_type == MTS_READ) *data = d->io_mask2; else d->io_mask2 = *data; break; /* EEPROM in slots 1-4 */ case 0x000040: case 0x000042: case 0x000044: case 0x000046: slot = (offset - 0x000040) >> 1; if (op_type == MTS_WRITE) nmc93cX6_write(&d->router->nm_eeprom_group[slot],(u_int)(*data)); else *data = nmc93cX6_read(&d->router->nm_eeprom_group[slot]); break; /* AIM slot 0 EEPROM */ case 0x000048: if (op_type == MTS_READ) *data = 0xFFFF; break; /* AIM slot 1 EEPROM */ case 0x00004A: if (op_type == MTS_READ) *data = 0xFFFF; break; /* * NM presence. * * Bit 0: 0 = NM present in slot 2 (0x42) * Bit 4: 0 = NM present in slot 4 (0x46) * Bit 8: 0 = NM present in slot 1 (0x40) * Bit 12: 0 = NM present in slot 3 (0x44) */ case 0x00004e: if (op_type == MTS_READ) { *data = 0xFFFF; if (vm_slot_get_card_ptr(d->router->vm,1)) *data &= ~0x0100; if (vm_slot_get_card_ptr(d->router->vm,2)) *data &= ~0x0001; if (vm_slot_get_card_ptr(d->router->vm,3)) *data &= ~0x1000; if (vm_slot_get_card_ptr(d->router->vm,4)) *data &= ~0x0010; } break; /* * VWIC/WIC related * Bits 0-2: WIC presence */ case 0x100004: if (op_type == MTS_READ) { *data = 0xFFFF; /* check WIC 0 */ if (vm_slot_check_eeprom(d->router->vm,0,0x10)) *data &= ~0x01; /* check WIC 1 */ if (vm_slot_check_eeprom(d->router->vm,0,0x20)) *data &= ~0x02; /* check WIC 2 */ if (vm_slot_check_eeprom(d->router->vm,0,0x30)) *data &= ~0x04; } else { d->wic_select = *data; } break; case 0x100006: if (op_type == MTS_READ) *data = 0x0004; break; case 0x100008: if (op_type == MTS_READ) { if (d->wic_cmd_valid) { *data = dev_c3745_read_wic_eeprom(d); d->wic_cmd_valid = FALSE; } else { *data = 0xFFFF; } } else { /* * Store the EEPROM command (in 2 words). * * For a read, we have: * Word 0: 0x180 (nmc93c46 READ) + offset (6-bits). * Word 1: 0 (no data). */ d->wic_cmd[d->wic_cmd_pos++] = *data; if (d->wic_cmd_pos == 2) { d->wic_cmd_pos = 0; d->wic_cmd_valid = TRUE; } } break;#if DEBUG_UNKNOWN default: if (op_type == MTS_READ) { cpu_log(cpu,"IO_FPGA", "read from unknown addr 0x%x, pc=0x%llx (size=%u)\n", offset,cpu_get_pc(cpu),op_size); } else { cpu_log(cpu,"IO_FPGA", "write to unknown addr 0x%x, value=0x%llx, " "pc=0x%llx (size=%u)\n", offset,*data,cpu_get_pc(cpu),op_size); }#endif } return NULL;}/* Initialize EEPROM groups */void c3745_init_eeprom_groups(c3745_t *router){ int i; /* Initialize Mainboard EEPROM */ router->sys_eeprom_group = eeprom_sys_group; for(i=0;i<3;i++) { router->sys_eeprom_group.eeprom[i] = &router->sys_eeprom[i]; router->sys_eeprom[i].data = NULL; router->sys_eeprom[i].len = 0; } /* EEPROMs for Network Modules */ for(i=1;i<=4;i++) { router->nm_eeprom_group[i-1] = eeprom_nm_group; router->nm_eeprom_group[i-1].eeprom[0] = NULL; }}/* Shutdown the IO FPGA device */static void dev_c3745_iofpga_shutdown(vm_instance_t *vm,struct c3745_iofpga_data *d){ if (d != NULL) { /* Remove the device */ dev_remove(vm,&d->dev); /* Free the structure itself */ free(d); }}/* * dev_c3745_iofpga_init() */int dev_c3745_iofpga_init(c3745_t *router,m_uint64_t paddr,m_uint32_t len){ vm_instance_t *vm = router->vm; struct c3745_iofpga_data *d; /* Allocate private data structure */ if (!(d = malloc(sizeof(*d)))) { fprintf(stderr,"IO_FPGA: out of memory\n"); return(-1); } memset(d,0,sizeof(*d)); d->router = router; d->net_irq_status[0] = 0xFFFF; d->net_irq_status[1] = 0xFFFF; vm_object_init(&d->vm_obj); d->vm_obj.name = "io_fpga"; d->vm_obj.data = d; d->vm_obj.shutdown = (vm_shutdown_t)dev_c3745_iofpga_shutdown; /* Set device properties */ dev_init(&d->dev); d->dev.name = "io_fpga"; d->dev.phys_addr = paddr; d->dev.phys_len = len; d->dev.priv_data = d; d->dev.handler = dev_c3745_iofpga_access; /* Map this device to the VM */ vm_bind_device(router->vm,&d->dev); vm_object_add(vm,&d->vm_obj); return(0);}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -